@average engineer you mentioned the station number must be same as that on the plc,how about if you have 4 drives,do all the drive use the same station number as on the plc i.e 3?
PKW can be used to directly read the value from the parameter without using PZD. First output pkw should hold the parameter group number and second output pkw should hold the parameter number, in HEX format. The value of the parameter will be received in fourth input pkw
Good learning contents
Can please show us the server client configuration for 800xa DCS System
Very nice explanation video - Like!
Above information very great full to understand thank You, Can you please tell me the where we can ready the fault code of drive and fault rest
Good explanation. Subscribed 😊
Could you please explain in detail about the PPO types with some examples?
Thanks.
Can the driver be controlled with simulation? The driver is a real driver. Only PLC will be virtual.
@average engineer
you mentioned the station number must be same as that on the plc,how about if you have 4 drives,do all the drive use the same station number as on the plc i.e 3?
Hi, the station number must be different
Very good explanation, Thank You. Can you do ABB AC800 PLC to ACS880 Drive via FENA-21 interface using ProfinetIO protocol?
Thank you, i dont have AC800 plc with me, but i have made a vid how to make program in ac800 using profibus
@@averageengineer4266 ok I understand, im gonna take a look at video Thank You :)
Thanks bro
May i know when we use pkw
PKW can be used to directly read the value from the parameter without using PZD. First output pkw should hold the parameter group number and second output pkw should hold the parameter number, in HEX format. The value of the parameter will be received in fourth input pkw