After searching the whole UA-cam for how to do this your video saved my Xmas day as my generator won’t stop going up and down then eventually died itself , I didn’t know the stuff name not until I got here Thanks so much
Very helpful... especially now that I decided to be doing things myself! Voltage was erratic and gen is high after changing spring. Everything is now as new🙂 Thank you sir
My small tiger generator goes off after running for sometime at times 10mins or even 1hour. And it doesn't get jammed cos there is enough oil in it, can bad piston and ring cause it? The carburettor is new not sure is the problem. I am suspecting the piston is bad. Thanks.
firstly, check if the generator is supplying fuel from the tap, secondly, if the oil is not well mixed, it could cause it. in which it can affect the Piston.
Wow! My generator runs for a while and then goes off, I checked oil and plug and still the same and sounds with a heavy vibration instead of a fine prrrrr noise. Could it be the carburetor?
Please help me, my tiger Gen will start very well but am not sure if the adjustment working because it will work for a short time and stop with a cracking sound.
I’m having issues with my generator frequency as some appliances won’t work. My gen is producing about 47Hz while the device needs a minimum of 50Hz. I’ve read about adjusting the governor to reduce or increase the frequency but I still don’t get it. Can you do a video to help out?
Saludos Mrs., Cesar vasquez de Republica Dominicana le saluda y le felicita por su explicacion, tengo un generador similar Y tratando de Regular el gobernador le quite el Candado de seguridad y este se bajo y no se como subirlo de nuevo,que debo hacer......... y gracias
@@jaywealthmechanics9285 thanks a lot. Tell me where can I get those gas cabarator to transform my generator from petrol to gas. And how much does it go for . I'm in south 🇿🇦
@@jaywealthmechanics9285 the generator will make one strange sound like it's going to die,plus once I increase current then put on the sumo the gen sound would be so so low
Bro, my 1 month old 4.5Kva Elepaq Constant generator engine speed keeps fluctuating. It slows down to a point where it seems like it's about to stop and then it speeds back up. This happens repeatedly while the gen is running. Is this also a problem with the governor? Thanks.
Firstly, check if the governor spring is in good condition. Secondly, check if the throttle spring is well connected. Lastly, the governor race could also cause it, reset the governor race.
My generator will go off after 30 minutes of running, but when I put it on back it will start working but still giving me sign to go off, please what should I do. Can the governor be the problem too
Please if I switch on my generator, the choke will always refuse to go back to it's normal position to make the generator steady, rather it will stay in the same spot and be going up and down and it will off on it's own
Pls Brother my sumec fireman 3000 runs very high but when I put my electric iron ...it reduces to the lowest and starts shaking...on a norm, it carries both the iron and sewing machine...pls what can be the problem the voltage when on load is very low and when not on load runs very high...
My 3.5kva generator immediately shuts down immediately wen my refrigerator is put on to it...wats the problem... just only one refrigerator and tv with light bulbs and fan used..
I like your lessons,but I am having issues with soaking of my plug in my small tiger generator and subsequent hard- starting ,can you give me on how I can resolve this?
when tiger generator soak plug, the first thing you should check, is weather the caburretor,is not doing over float. second if the engine block is bad, it also cause it. lastly, excess of engine oil do cause it.
After searching the whole UA-cam for how to do this your video saved my Xmas day as my generator won’t stop going up and down then eventually died itself , I didn’t know the stuff name not until I got here
Thanks so much
Smile 😄.. you're welcome
Your video just saved my day...
Thank you.
You are welcome
Thanks bro. Very helpful. I need more video like this. Thanks again
You're welcome 🤗🤗
Great job guys keep up the good work . 🎉
Yeah. Thanks
Very educative and straight forward
Thank you kind sir .I was having trouble with this issue and you helped me in 2 minutes..thank you for your time and informative video 📹👍😀
You're welcome
Nice one bro
Thanks 🔥
Good and great👍
Thanks 😊
Very helpful... especially now that I decided to be doing things myself!
Voltage was erratic and gen is high after changing spring.
Everything is now as new🙂
Thank you sir
You are welcome 🤗
Very nice thank you. Thumbs up
you're welcome sir
thanks GOD ,save my DAY.
You’re welcome
Thanks for video♥️♥️♥️♥️
You’re welcome ❤️
You are genius sir.
Smile 😃. Thanks
Simply thank you
You’re welcome
Good job thanks
You are welcome 🤗
What about the Philips head screw with the spring around it, what do you do there.
Thanks this very educative. Currently having issue of too much noise with my generator. Could it be the governor whatever u mentioned
Noise could be from the engine bearing or shaft. But when generator is running too high or over speeding, it is the governor race
To much noise I would say you need a new muffler, too many revs then follow this video.
Please what causes the governor to change from it's original setting?
Lack of oil could cause it.
Pierce of governor race rod
Does a champion 3500 generator be the same to adjust the governor?
Yes the same setting 💯
@@jaywealthmechanics9285 thankyou much. i will try it.
My small tiger generator goes off after running for sometime at times 10mins or even 1hour. And it doesn't get jammed cos there is enough oil in it, can bad piston and ring cause it? The carburettor is new not sure is the problem. I am suspecting the piston is bad. Thanks.
firstly, check if the generator is supplying fuel from the tap, secondly, if the oil is not well mixed, it could cause it. in which it can affect the Piston.
🙋♂️👍👍👍لايف يو
😃😄This generator must has run over 1,000 hours. We built it.
😄
Wow! My generator runs for a while and then goes off, I checked oil and plug and still the same and sounds with a heavy vibration instead of a fine prrrrr noise. Could it be the carburetor?
Is the oil guage.. check if the fuel is supplying well and service the carburetor.
Thank u!!!
You're welcome!
Please help me, my tiger Gen will start very well but am not sure if the adjustment working because it will work for a short time and stop with a cracking sound.
Did you mix the engine oil well.
Please use Hand Gloves while working with mechanical parts, its a very educative instructional video👍
Okay
There is always a Karen isn't there! Wake up to the real world.
Thankfully you
🤗
Thanks but I have a question how do we know when to turn clockwise or anticlockwise
Clockwise is rotation to the right direction while anti clock wise is left direction
What you don't know which way a clock goes.
I’m having issues with my generator frequency as some appliances won’t work. My gen is producing about 47Hz while the device needs a minimum of 50Hz.
I’ve read about adjusting the governor to reduce or increase the frequency but I still don’t get it.
Can you do a video to help out?
Nice
🤗
Saludos Mrs., Cesar vasquez de Republica Dominicana le saluda y le felicita por su explicacion, tengo un generador similar Y tratando de Regular el gobernador le quite el Candado de seguridad y este se bajo y no se como subirlo
de nuevo,que debo hacer......... y gracias
Can you pls help me with the very same issue on a 2 stroke generator. It brings out 300v instead of 220v . And it's very loud.
Reduce the speed and the voltage will regulate to 220v .
@@jaywealthmechanics9285 thanks a lot. Tell me where can I get those gas cabarator to transform my generator from petrol to gas. And how much does it go for . I'm in south 🇿🇦
Please what can make generator off when the put load
I put new carburetor and plus, but he still off
It might be overload or the speed of the generator is low.
Sup bro
Boss each time i turn on my gen then put on my sumo the gen current reducing then dies off,what could ve the issue?
Is it the current that die off or the generator itself
@@jaywealthmechanics9285 the generator will make one strange sound like it's going to die,plus once I increase current then put on the sumo the gen sound would be so so low
Bro, my 1 month old 4.5Kva Elepaq Constant generator engine speed keeps fluctuating. It slows down to a point where it seems like it's about to stop and then it speeds back up. This happens repeatedly while the gen is running. Is this also a problem with the governor? Thanks.
Firstly, check if the governor spring is in good condition.
Secondly, check if the throttle spring is well connected.
Lastly, the governor race could also cause it, reset the governor race.
@@jaywealthmechanics9285 thanks man. Will try
Thanks
My generator will go off after 30 minutes of running, but when I put it on back it will start working but still giving me sign to go off, please what should I do. Can the governor be the problem too
The governor can't be the problem. Service the carburetor or you check the oil gauge
Shake, Rattle and Roll !!! 🤣😂🤣
ممتاز بس اشتي منك الدائره الكهرباةيه عن هدا المولد بالتفصيل لاانه عندي واحد مثله الضفيره حرقت
Please if I switch on my generator, the choke will always refuse to go back to it's normal position to make the generator steady, rather it will stay in the same spot and be going up and down and it will off on it's own
check the position where the choke is place, confirm whether is inserted properly. then give me feedback
Pls Brother my sumec fireman 3000 runs very high but when I put my electric iron ...it reduces to the lowest and starts shaking...on a norm, it carries both the iron and sewing machine...pls what can be the problem the voltage when on load is very low and when not on load runs very high...
Try to set the governor race, it will be balance
@@jaywealthmechanics9285 thanks ..have done that already...I also increased the voltage on the AVR...everything is okay now...Thanks once again
You're welcome 😊
My throttle rod keeps falling off when I put it on, how can I fix it please?
Is it falling off from the carburetor side or the governor race
❤❤
My 3.5kva generator immediately shuts down immediately wen my refrigerator is put on to it...wats the problem... just only one refrigerator and tv with light bulbs and fan used..
Increase the speed of the generator.
Hello. How can i replace the regilator for same generator
Yes you can replace it.
Where can i find it the regulator?
Cara menyetel putar kmna mas yang bnr
🙌
My constant elepaq is surging when on load it even surge at times without load, the gen is just 3 weeks old please help
Clean and adjust carburetor
Thanks
Please my generator consumes so much fuel, what should I do about that
firstly, I need to know the size of generator you are using
I like your lessons,but I am having issues with soaking of my plug in my small tiger generator and subsequent hard- starting ,can you give me on how I can resolve this?
when tiger generator soak plug, the first thing you should check, is weather the caburretor,is not doing over float. second if the engine block is bad, it also cause it. lastly, excess of engine oil do cause it.
What is function of governer
The function of governor race is to regulate the speed of the engine
@@jaywealthmechanics9285 thank you
اجل اجل
Useful video
But i have 3 k. V generator and its speed too high i did this but not working
Speed is too high maybe governor is not working
If it doesn't work, that means the governor race in the engine is bad
@@jaywealthmechanics9285
I changed governor
It was broken
Okay. After changing the governor in the engine.. did it work fine.
@@jaywealthmechanics9285 yes i changed governor and cam
Now its fine and running slow speed with nice volts
@@حقپرست-ش2ق wow. Nice one👏👏👏
Io ho un generatore simile che non accellera quando attacco la pompa sommersa
Bros you too much
You're welcome 😊
Dude doesn’t even need fuel
There is fuel in carburetor already
Thanks
You're welcome