Thanks for a starting point to make 2 kits into a bigger one. I also did some redesigning once I completed yours. I added in the actual roof hatch over the side doors that can open and close, The whole roof section from the front to just past the side hatches can come off, made the Rear liftoff roof sections together as one larger section, different interior configuration to allow for more seats and troops, more parts to the entire roof, and more of the plates on the bottom to reduce the wobble. I had also modded my original by getting rid of the stud shooters and replacing them all with actual blasters to include a redsign of the rear turret. You did have sections of your video that were hard to follow due to either lighting or not showing the pieces very well and that was at playing the video at.25 speed.
I bought this set to mod it into a ship. What you did hear is exactly how I would want to do my interior. I want to widen it and then make the center either a sleeping quarters or a control room and then gut the back to be a cargo bay. Of course add some wings to it all. Great job you did here.
so i'm gonna do this with my marauders i have but i have a question when doing this, do you build certain parts from the manual and use that or do you make your own
All parts are from the two sets and I built one marauder with the manual to know how to build some parts of the vehicle and dismantle it again to build the XL marauder. :)
Thanks, thanks, thanks. This is the best inspiration video I found for merging two marauders into one really good one. I kept on modifying, so mine is 6 studs longer, slightly higher can load 2 pilots, 12 passengers with seats, 6 standing in the door area or alternatively of the cost of 6 seats it can load a Speederbike. So much fun, thanks for this awesome video. Very great build btw.
@@hshiajnsns2520 No instructions available. Only photos from the final version of my Marauder. However, I bought a third set and will merge this third set to the existing Marauder based on two sets, will be big :)
@@hshiajnsns2520 Well, it's not my video. This is from @Haibricks, who had that great idea. Suggestion: Slow down the video on UA-cam or download this video as I did, was easier to find out the steps. Also, keep in mind, @Haibricks is disassembling his model, should make it easier for you to reassemble.
looks cool at a glimpse but why not properly show what it looks like first or even after?
That is cool that you just reversed the footage of you taking it apart. Quite smart
Okay could not for the life of me figure out how he was picking up those pieces. Now I feel stupid.
@@ericjohnson6057 😂 algood bro
amazing job it took me half the night and this morning to finish very cool thank you so much
Thank you very much! :)
Thank you very much! :)
Why so long?
@@maxwellsmith1578 because it was very late
This is the best custom/moc build i tried out, good looking and very sturdy.
Pretty hard to make this kind of stuff sturdy from multipacks!
Danke!
Better than Wurger's build?
Wow I’ve been looking for something like this for ages thanks!
Thanks for a starting point to make 2 kits into a bigger one. I also did some redesigning once I completed yours. I added in the actual roof hatch over the side doors that can open and close, The whole roof section from the front to just past the side hatches can come off, made the Rear liftoff roof sections together as one larger section, different interior configuration to allow for more seats and troops, more parts to the entire roof, and more of the plates on the bottom to reduce the wobble. I had also modded my original by getting rid of the stud shooters and replacing them all with actual blasters to include a redsign of the rear turret. You did have sections of your video that were hard to follow due to either lighting or not showing the pieces very well and that was at playing the video at.25 speed.
I bought this set to mod it into a ship. What you did hear is exactly how I would want to do my interior. I want to widen it and then make the center either a sleeping quarters or a control room and then gut the back to be a cargo bay. Of course add some wings to it all. Great job you did here.
Danke dir mach weiter so 💪🏻
Tutorial so hard I waited 2 years to come back to project
It was worth it! 😊
Great build thanks for sharing.
Is there any instructions to this build like any pdf or something
will you have instructions on how to build this ?
The reverse footage is pretty cool but it makes the instructions hard to follow. Good build though!
I like this a lot, sehr toll!
Did you have to use any extra pieces? Or just the pieces from the 2 sets
Just the pieces of the two sets. :)
@@haibricks oh cool, thank you so much for the reply 😄
There isn't any 2x2 curved slop as shown at ua-cam.com/video/jGMg2LalHZ4/v-deo.html, but there are two 1x2s.
Thanks for this video!
Instruction PDF please of all tutorials please
I can't. Too much work... maybe in future
@@haibricks Sent you a PM on rebrickable about instructions (Not a request for you to make them).
Very nice ive got two imperial marauders now i know how i can use them
any chance anyone went through and made proper page instructions for this?
Looks awesome!
Thank you :)
Great build just finish improving mine to hold more troops it's a lot larger than I thought it would be. Keep it up
Nice~ It stimulates our imagination!! 😃
this is amaizing am build 2
Hi amazing build but hard tutorial to follow because of how fast it is and the video quality was wondering if you would make instructions
You can slow down the video. :) The Video will be too long if I upload it in normal speed.
@@haibricks please do PDF instructions, this is extremely hard to follow even slowed down. At some points I can’t even see what your putting down.
Danke
Now it’s minifig scale
i cant find anymore 1 x 8
6:20 just making a time stamp for tomorrow
so i'm gonna do this with my marauders i have but i have a question
when doing this, do you build certain parts from the manual and use that or do you make your own
All parts are from the two sets and I built one marauder with the manual to know how to build some parts of the vehicle and dismantle it again to build the XL marauder. :)
thanks for the info!
I'm gonna buy another one now
Are people actually using the tutorial to build it?
Yeah i finished it today Was a little bit Harder then i thought but its so awesome man
impossible challenge: build it with x2 speed + no pauses
Bro I have 206 pieces left what should I do😭
tysm
This is no extra part right? use only part form 2 set wow that's so cool
Yes :)
@@haibricks wow thx so much i will build it soon
Did anyone notice that he's just breaking it apart in reverse
Please make a tutorial with no annoying background music and slower speed.
3:31
Thanks, thanks, thanks. This is the best inspiration video I found for merging two marauders into one really good one.
I kept on modifying, so mine is 6 studs longer, slightly higher can load 2 pilots, 12 passengers with seats, 6 standing in the door area or alternatively of the cost of 6 seats it can load a Speederbike.
So much fun, thanks for this awesome video. Very great build btw.
U got instructions
@@hshiajnsns2520 No instructions available. Only photos from the final version of my Marauder. However, I bought a third set and will merge this third set to the existing Marauder based on two sets, will be big :)
@@bcloud78 okay can you go slower I found it hard to follow amazing build tho
@@hshiajnsns2520 Well, it's not my video. This is from @Haibricks, who had that great idea. Suggestion: Slow down the video on UA-cam or download this video as I did, was easier to find out the steps. Also, keep in mind, @Haibricks is disassembling his model, should make it easier for you to reassemble.
@@bcloud78 okay thank you
REVIEW
Shanks TO tutorial
tenet
Great build, awful tutorial
Yes, but for free. :)
7:44
6:00