I have a 2010 jeep grand Cherokee limited 5.7, i changed the waterpump, thermostat and radiator. I need to know does the hydraulic fan suppose to run upon start up of the vehicle.
hey there, it doesn't on mine, it looks like the fan relay or solendoid needs to be replaced. For any issues the default setting is to run all the time. hope this helps!
@@moparbro thanks, I've heard it's suppose to run to keep the oil running thru the condenser. I'm no mechanic I don't know any about where a solenoid or relay is on it
@BossJR13 hey there, head to the local parts shop and get the right nozzle size, or wherever you got the new water pump from, or the local parts show could get you an adapter for it
@@moparbro I’m currently at an auto parts store but no one knows what the bleeder piece is called. Do you know what it’s called? If not, will my car run without the bleeder line attached?
@moparbro ok I’m out of options outside of purchasing an OEM water pump and taking the one I got off of Amazon off because after calling around for the bleeder nozzle, no one sells it.
Hey there, 1st sign was intermittent smelling of coolant in the cabin of the jeep while driving, I then checked the coolant reservoir and noticed it was half full. When I filled the coolant reservoir to full, coolant started to drip out o the area where the water pump gasket failed. Other the coolant drip when filling the reservoir, the water pump operated as intended with the jeep not overheating and maintaining a normal temperature range. Thank you for asking! excellent question! Thanks for watching aswell!
@@moparbro thank you bro . I have one more question . I have a srt jeep as well. And I noticed after driving hard on the highway with the ac on for like 40 mins my temp almost went to half. Is that normal for the temp to raise a bit after driving hard ? It did go down once I chilled out though
@@Tracklyfe_T Hey there! after driving hard it would get a bit hotter, but typically it the operating temperature should stay pinned at its regular spot. Keep an eye on it, fluctuating temp readings are an indicator that the thermostat is starting failing. Here's a vid of when mine went : ua-cam.com/video/mEFGODk2Yjg/v-deo.html thnx for asking!
You missed 3 bolts at the bottom. They are kinda a Pita. Otherwise good video. Followed this and swapped my pump. Each bolt I took off I put into the new water pump. Once I haf the old one off I swapped them. Good way of keeping track other than a sharpie since they all are wonky
Most pumps die at certain mileage due to the stupid gasket. Still surprised they are still making metal pumps, as most new cars are using plastic crappy ones 😠🙄
agreed its crazy, the water pump in mine was fine just the gasket, but considering today's build quality, the bearing in the pump was probably going to go soon too forcing people to just replace the whole thing lol
@@lontarian2228 ah gotcha, if it does it'll just be a small leak, as long as you keep the coolant reservoir full and the temperature doesn't go past half you can still drive until you get it fixed
Here is the part I used ! www.amazon.ca/shop/fred_eazy21/photo/amzn1.shoppablemedia.v1.a155c250-1fc9-4080-9b4b-8e6447e07c0b?ref_=cm_sw_r_cp_ud_aipsfphoto_aipsffred_eazy21_5TPRB6CRBDVM0DN251J2
@@GoddSpeed hey there, similar process different part number which is this one 68165882AC , probably have to remove supercharger belt to get to the water pump. thnx for watching
hey there, it's Preston all makes all models which is unfortunately yellow, we used to temporarily to check for leaks probably should of explained that in the video lol, thnx for watching the install video
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
How to vinyl wrap Jeep Grand Cherokee ASMR wrap
ua-cam.com/video/m5ExSWNy8Og/v-deo.html
Nice..got a 5.7 and will be replacing water pump soon with this video playing..
awesome, thnx for watching!
Seems like i always have to make repairs in cold weather too
@@StreetStoriesEnt oh yea lol, doesn't look like they like the cold lmao
Thanks for the detailed video 💪🏼 will be working on mine this weekend.
I have a 2010 jeep grand Cherokee limited 5.7, i changed the waterpump, thermostat and radiator. I need to know does the hydraulic fan suppose to run upon start up of the vehicle.
hey there, it doesn't on mine, it looks like the fan relay or solendoid needs to be replaced. For any issues the default setting is to run all the time. hope this helps!
@@moparbro thanks, I've heard it's suppose to run to keep the oil running thru the condenser. I'm no mechanic I don't know any about where a solenoid or relay is on it
Bro perfect explanation 👌 on how to do it. Am ordering my water pump from summit or dealer. Bro thanks for your video
Hey for some reason the bleeder nozzle does not fit in the new water pump. Any suggestions?
@BossJR13 hey there, head to the local parts shop and get the right nozzle size, or wherever you got the new water pump from, or the local parts show could get you an adapter for it
@@moparbro I’m currently at an auto parts store but no one knows what the bleeder piece is called. Do you know what it’s called? If not, will my car run without the bleeder line attached?
@BossJR13 hey there, don't think it would, I would take the one off the oem one and put it on your new one or just get an adaptor from the shop
@moparbro ok I’m out of options outside of purchasing an OEM water pump and taking the one I got off of Amazon off because after calling around for the bleeder nozzle, no one sells it.
@@BossJR13 that's actually are pretty a good idea!
It looked like you had orange coolant in the old water pump. Why did you put replace it with green coolant? That's for older vehicles.
hey there we used all makes all models preston
I had to do the same thing to the magnum and the timing belt. Great job 👍👍👍👍
oh man the timing belt must of been fun lol 😮 thnx for watching!
Thank you, THESE VIDEO WILL HELP ME VERY MUCH ON DOING THOSE REPLACEMENT ON MY CAR🫡💯
Anyone knows if waterpump is cover under powertrain warranty
yep should be, mine was 100,000km and my water pumped failed at 120,000km 🤮
Great video
thnx for watching!
Hey bro how did you know it was time to Replace the water pump ? Was there any signs or issues u we’re having ?
Hey there, 1st sign was intermittent smelling of coolant in the cabin of the jeep while driving, I then checked the coolant reservoir and noticed it was half full. When I filled the coolant reservoir to full, coolant started to drip out o the area where the water pump gasket failed. Other the coolant drip when filling the reservoir, the water pump operated as intended with the jeep not overheating and maintaining a normal temperature range. Thank you for asking! excellent question! Thanks for watching aswell!
@@moparbro thank you bro . I have one more question . I have a srt jeep as well. And I noticed after driving hard on the highway with the ac on for like 40 mins my temp almost went to half. Is that normal for the temp to raise a bit after driving hard ? It did go down once I chilled out though
@@Tracklyfe_T Hey there! after driving hard it would get a bit hotter, but typically it the operating temperature should stay pinned at its regular spot. Keep an eye on it, fluctuating temp readings are an indicator that the thermostat is starting failing. Here's a vid of when mine went : ua-cam.com/video/mEFGODk2Yjg/v-deo.html thnx for asking!
You missed 3 bolts at the bottom. They are kinda a Pita. Otherwise good video. Followed this and swapped my pump. Each bolt I took off I put into the new water pump. Once I haf the old one off I swapped them. Good way of keeping track other than a sharpie since they all are wonky
thnx for watching!
How did u know ur pump was out
hey there, it was because it was leaking out of the gasket. thnx for watching!
Most pumps die at certain mileage due to the stupid gasket. Still surprised they are still making metal pumps, as most new cars are using plastic crappy ones 😠🙄
agreed its crazy, the water pump in mine was fine just the gasket, but considering today's build quality, the bearing in the pump was probably going to go soon too forcing people to just replace the whole thing lol
@@moparbro Definitely. I think mine is about to start leaking soon. Five years of that brittle plastic is usually the mark LOL
@@lontarian2228 ah gotcha, if it does it'll just be a small leak, as long as you keep the coolant reservoir full and the temperature doesn't go past half you can still drive until you get it fixed
Here is the part I used ! www.amazon.ca/shop/fred_eazy21/photo/amzn1.shoppablemedia.v1.a155c250-1fc9-4080-9b4b-8e6447e07c0b?ref_=cm_sw_r_cp_ud_aipsfphoto_aipsffred_eazy21_5TPRB6CRBDVM0DN251J2
does it fit for 2012 cherokee srt?
@@springchen201 hey there, yup! from 2011-2020 . thnx for watching!
Does it work for 2018 Jeep Trackhawk?
@@GoddSpeed hey there, similar process different part number which is this one 68165882AC , probably have to remove supercharger belt to get to the water pump. thnx for watching
Brooo....thats not the right coolant!🤦🏻♂️
hey there, it's Preston all makes all models which is unfortunately yellow, we used to temporarily to check for leaks probably should of explained that in the video lol, thnx for watching the install video
I physically and audibly made a distressing noise sounded something like a skinwalker giving birth
Do you know what coolant should be used?
Just replaced mine on my 2018 jeep srt
nice!