I agree with you 100% especially spending that kind of money. I’m definitely that pay attention to detail type of guy. Quality is very important when you are selling a product.
This is the reason why i dont buy non-oem parts, because its always trash not unless you take the time to change it or add parts to make it right.. Thanks for sharing.
Do you have any other recommendations, including bumper brands? I've been looking to get a new bumper to give the stock front of my 10th gen a fresh look. Thanks for your review!
The stock accord bumper is one of the most aggressive and nice looking oem bumpers. The type r accord bumper is cool but unnecessary when the oem looks as good as it does.
First of all anyone who buy Yofer products you must drive carefully and pay attention to things in the road sometimes it can't be avoided however Yofer do have good products some better than others and your entitled to your opinion but keep this in mind that any body kit you add to your car it is automatically going to lower the level of the car which would make it acceptable to running into things that it can not clear. I recently had the same problem however I understand I have to be more careful to where I drive the vehicle and how to avoid these accidents. Having it done a body shop will cost you far more.
I appreciate the honest review. You’re not wrong. These bumpers are not cheap but unfortunately the material that is made out is cheap. My front V2 didnt even make it 6 months. Thanks for the review, 🔥 🔥 🔥 🔥 🔥
Sent you a message I have been on the fence on this one . Bought the V4 read bumper which I like just had some small paint flaws in it. I sent some picks of my current front lip it’s not the yofer its the other new one just came out looks good !!!!
5:30 this is what I can't take with their products sometimes. They did good on my rear bumper(my friend wasnt so lucky) it was painted and molded well. But my front bumper has the same thing. I repainted because of that. The mold was uneven and the paint work sucked
Smh. Man I’m so disappointed. I’m gonna figure something out before I install it. Really considering getting it molded/ reinforced and repainted. At a minimum reinforcing it. That center section is way too flimsy.
Bought this to get it put on and the shop thats installing it told me its not lining up not sure if anyone else had that issue or if theyre supposed to do something with it to make it work
Yofer that and Yofer this, they all are poorly made in quality..they are made to be disposable that doesnt lasts long. even if you use bolts and nuts in lieu of screws, the plastic/part is the problem, it is so flimsy. Thanks for an honest review.
First what is up with the Auto Zone. Fake hood scoop lol. Second of all who in the world use's the hardware they send you ? You never use the screws. You need to put some hex bolts & nuts with washers with the nylon lock nuts.
Ok goofy. Since you want attention. First, the “vent” comes from a Lexus RC F. Second, it’s fully functional. But carry on. The internet keeps you safe from a guy like me…
@@fred_b_360 if it is functional. Then why is in the center of the hood? If the intake is in the front left side of the vehicle ? I only know this because I'm running a PRL intake with a PRL ente rcooler with PRL charger pipes. But whatever. Lol.
Are you a clown, sir? The “vent” is over the turbo. The purpose is to disperse heat, not suck in air. Tell me you don’t own a car without telling me. Sheesh.
I have time today… I expect for goofballs like you to watch my vid, then disregard solid info just to focus on old material that molded the first POS Yofer lip I had (that broke in less than a year). You are why sheep exist in the aftermarket. Keep supporting low quality products, clown 😎
Yofer makes crappy products. Looks nice but won't last long. Had 2 yofer lips and ripped off. Never buying yofer again.
100% agree… I can’t even sell this bumper 🤦🏾♂️
Finally somebody Who talks about real stuff. Thanks buddy
I agree with you 100% especially spending that kind of money. I’m definitely that pay attention to detail type of guy. Quality is very important when you are selling a product.
This is the reason why i dont buy non-oem parts, because its always trash not unless you take the time to change it or add parts to make it right.. Thanks for sharing.
You're not wrong. But from a creative standpoint point... you would be limited
I will definitely be using bolts to secure everything together and try and fix those issues. Still a great looking piece. Thanks for the video!
Glad to help
I ain’t gon lie the Yoder kit is what makes the accord pop shits looks fire 🔥
I definitely like it. Just don’t want it to break 😫
Nothing worse than buyers remorse!
Not a fan I think the stock looks good. I want to do a lip, side skirts, and rear lips with defuser.
Do you have any other recommendations, including bumper brands? I've been looking to get a new bumper to give the stock front of my 10th gen a fresh look. Thanks for your review!
unfortunately, yofer is pretty much the only aftermarket source for bumpers rn. custom is the only other route🤷🏾♂️
The stock accord bumper is one of the most aggressive and nice looking oem bumpers. The type r accord bumper is cool but unnecessary when the oem looks as good as it does.
Really considering selling it now.
First of all anyone who buy Yofer products you must drive carefully and pay attention to things in the road sometimes it can't be avoided however Yofer do have good products some better than others and your entitled to your opinion but keep this in mind that any body kit you add to your car it is automatically going to lower the level of the car which would make it acceptable to running into things that it can not clear. I recently had the same problem however I understand I have to be more careful to where I drive the vehicle and how to avoid these accidents. Having it done a body shop will cost you far more.
What did you do after your recent problem?
That Florida sun will make this bumper crack like the TL’s dashboard 😂
I appreciate the honest review. You’re not wrong. These bumpers are not cheap but unfortunately the material that is made out is cheap. My front V2 didnt even make it 6 months. Thanks for the review, 🔥 🔥 🔥 🔥 🔥
Thanks for checking out the channel.
Thanks for the video, was gonna get it but my have to reconsider that after ur video
I’ve had it for months and STILL yet to put it on…
Sent you a message I have been on the fence on this one . Bought the V4 read bumper which I like just had some small paint flaws in it. I sent some picks of my current front lip it’s not the yofer its the other new one just came out looks good !!!!
That things gonna fall apart around 130mph. Im calling it.
Biggest fear. Outside of ripping the center section off on the freeway.
5:30 this is what I can't take with their products sometimes. They did good on my rear bumper(my friend wasnt so lucky) it was painted and molded well. But my front bumper has the same thing. I repainted because of that. The mold was uneven and the paint work sucked
Smh. Man I’m so disappointed. I’m gonna figure something out before I install it. Really considering getting it molded/ reinforced and repainted. At a minimum reinforcing it. That center section is way too flimsy.
Yikes, and I was thinking about a new bumper. I wish Yofer upped the quality bit for the price they're charging
Sometimes simple is beautiful
Bought this to get it put on and the shop thats installing it told me its not lining up not sure if anyone else had that issue or if theyre supposed to do something with it to make it work
Smh. Looks like im stuck with mine, so im most likely gonna get it molded/ installed by my bodyshop.
I tried to warn people 🤷🏾♂️
just out of curisoity where'd you get this lip from? been meaning to look into it myself. good content btw
Got the 3 piece bumper from cuztom tuning. The lip is a part of it.
Im considering getting the front and rear v4 bumpers unpainted and have my shop paint it. Any suggestions or info since this post?
haven’t seen too many complaints… I still haven’t installed mine. Lack of motivation, smh.
I found your channel playing gears 5
Thanks, man!
nice review good stuff
Damn, I was considering ordering this one. Since it looks so nice
so far I haven’t seen anyone break one. I’d say go for it. Im putting mine on when the weather warms up.
Is fire bro definitely worth it
update since you got it ? so far i havent seen any negatives other than quality control
I haven’t seen any break yet. Hopefully mine will be the same way. Not throwing it on until I decide on my new wheel setup.
@@fred_b_360 bet, looking forward to any feedback on it, should be ordering mine soon
You seem really on the fence about keeping it. Maybe go with your gut and just get the lip on the own bumper. I'm sure you can sell it easily.
Looks as good as that hood vent
thanks…
is the front lip removable? because honestly i really like the bumper but i don’t want a front lip on it
Front lip HAS to be installed.
Greetings FBROCK. Unrelated but could please share what type of hood you presently have on the car and is the hood scoop functional? Thank you sir.
Check out this clip of the install ua-cam.com/users/clipUgkxiTUGEnR7u4b8y4iaHZOzVL-yalLJL054
I saw 2 prices one these. A cheaper one for 200 and a more expensive one that cost 720. How much did this cost you?
I paid 899.00 when it first came out. I personally wouldn’t purchase any Yofer product unless it’s sold through HIREV Sports.
@@fred_b_360y hirev only?
Yofer that and Yofer this, they all are poorly made in quality..they are made to be disposable that doesnt lasts long. even if you use bolts and nuts in lieu of screws, the plastic/part is the problem, it is so flimsy. Thanks for an honest review.
Yep. My yofer lip tore up in less than a year. I should’ve learned my lesson.
Keeping it 💯!!!!
Nice video
I hear u good vid
🙏🏾
Here can I buy this
Yofer… HiRev Sports
@@fred_b_360 how much was it ???
899.00 when I bought it, it’s probly cheaper now. Mine’s for sale 600.00 never been installed.
@@fred_b_360 nice I would buy it off you if you was in my area… are you in Miami ??
NC
absolutely they will turn the vehicle into rice cooker
First what is up with the Auto Zone. Fake hood scoop lol. Second of all who in the world use's the hardware they send you ? You never use the screws. You need to put some hex bolts & nuts with washers with the nylon lock nuts.
Ok goofy. Since you want attention. First, the “vent” comes from a Lexus RC F. Second, it’s fully functional. But carry on. The internet keeps you safe from a guy like me…
…and it doesn’t matter what “hardware” is included. The bumper is cheaply built and flimsy.
@@fred_b_360 then you should of done more research on it before purchasing it buddy.
@@fred_b_360 if it is functional. Then why is in the center of the hood? If the intake is in the front left side of the vehicle ? I only know this because I'm running a PRL intake with a PRL ente rcooler with PRL charger pipes. But whatever. Lol.
Are you a clown, sir? The “vent” is over the turbo. The purpose is to disperse heat, not suck in air. Tell me you don’t own a car without telling me. Sheesh.
Update on the bumper?
Probably gonna sell it.
That's to much my 3 piece looks better
Lol, bro I can’t take this review seriously. Just look at you stock bumper. Literally house siding material. Clown.
I have time today… I expect for goofballs like you to watch my vid, then disregard solid info just to focus on old material that molded the first POS Yofer lip I had (that broke in less than a year).
You are why sheep exist in the aftermarket. Keep supporting low quality products, clown 😎
i agree this product is complete garage broke off with the first bump i went over very poop quality
@@herrerajoe9770learn to drive then you won't have broken pieces 😂
@@2.0t-MetallicGrayAccord HAHAHAHAHA