Unbrick Redmi Note 9 or Redmi 10X 4G (merlin) using SPFlash Tool 100% Working without Mi Auth ✓✓

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ •

  • @rosu2048
    @rosu2048 Рік тому +3

    dude, super thank you so much, i wasn't using any phone for two weeks now because i bricked my phone from downgrading it. now, i revived it following this tutorial. thank you so so much !! that saved me some pennies

  • @karankhurana2160
    @karankhurana2160 2 роки тому +5

    Bro, I don't know how to thank you. You saved me, bro. Just when I thought I lost my phone, I found you, and now it's working. Thank you so much bro... ❤❤
    I faced two issues so if anyone is facing them, this is what you do
    1. storage has exceeded memory life - in option turn of 'storage lifecycle check'
    2. ram exception error - the baud rate is too high for your phone let it be 115200.
    Hope this helps someone :)

  • @Mc_Colour
    @Mc_Colour 3 роки тому +5

    I couldn't even access fastboot or recovery, but this managed to unbrick my device so thank you so much

    • @gv.wizzyy
      @gv.wizzyy 2 роки тому +1

      So you couldn’t go fast boot and it still worked

    • @Mc_Colour
      @Mc_Colour 2 роки тому +1

      @@gv.wizzyy Yes, I was skeptical, had talked to Xiaomi support staff etc, but this genuinly worked, as long as you follow the steps in order. If the phone is in a boot loop to redmi logo and off again then it should work as it did for mine.

    • @niroshadilrukshi993
      @niroshadilrukshi993 Рік тому +1

      Bro did the phone connect to the pc while it was keep booting to the Redmi logo?

  • @anonymouskapran868
    @anonymouskapran868 2 роки тому +4

    Bro, you're my saver! Unbricked my Redmi 9, thank you very much! Peace to you and your family!

  • @humbertocampofloyd9130
    @humbertocampofloyd9130 3 роки тому +3

    Maaaan! I tought my phone was dead. I revived it with your help! God bless you my friend.

  • @dayalal6936
    @dayalal6936 5 місяців тому

    can't thank you enough, i tried everything to flash my bricked redmi note 9, tried your method and in 30 mins everything was done. Thanks alot

  • @semlefri
    @semlefri 3 роки тому +3

    I thought my phone was dead. I was so scared. I followed your tutorial to the letter and it worked. thank you so much.

  • @cib553
    @cib553 Рік тому +1

    Tnx m8 you save my day, I bricked my Redmi 9 global version and I use yours tutorial to fix my phone thank you one more time. Btw on redmi 9 in the last step hold volume button down and power button.

  • @ronwell5999
    @ronwell5999 3 роки тому +2

    my phone got unknown device after this and i worry that i have to change my board because i believe i damage my own phone but i guest i wrong because after 3 days when i tried this method its perfectly work for me and thank you sir you save my phone

  • @KWPZ21
    @KWPZ21 2 роки тому +3

    Big thanks bro, it worked. Just a note, on my phone it's hold volume down then press the power button. Python is installed on my PC now, might as well learn it. 🥂

    • @cib553
      @cib553 Рік тому +1

      Same on my phone Redmi 9

  • @inthu4434
    @inthu4434 2 роки тому +3

    Broo after 3 hours of issues trying to make your tutorial, i finally did it! Thank you so much!

  • @snqwflk.presents
    @snqwflk.presents 2 роки тому +5

    update: Thank you so much man. After 4 hours of struggling and trying, it worked. You saved my phone. Love from Hungary

    • @AlltricksCoIn
      @AlltricksCoIn  2 роки тому +1

      Your most welcome

    • @zitryxedits9557
      @zitryxedits9557 2 роки тому

      DOMINIK, Magyar vagyok, tudnánk beszélni privátban valahogy? Nagyon kéne a segítség!

  • @OMtech20
    @OMtech20 Рік тому +1

    thank you so much my phone was dying I couldn't turn it off or go fast boot or recovery or anything it was in bootloop this helped (redmi9)

  • @ValoRant-b2c
    @ValoRant-b2c Рік тому +3

    bro you are truely amazing ! god bless you bro! you are a new suscriber!

  • @laurent13500
    @laurent13500 Рік тому +2

    Merci beaucoup tu as sauvé mon redmi note 9! 🙂

  • @MichiOrigami
    @MichiOrigami Рік тому +2

    Thank you, this is the unique video of youtube complete and functionality , i'm very happy with my phone :)

  • @jeffreyavestruz2020
    @jeffreyavestruz2020 3 роки тому +2

    THANK YOU BRO!!!!
    YOU SAVE MY DEVICE!!!
    YOUR THE BEST BRO.!!!!

  • @nazmussaqib8508
    @nazmussaqib8508 3 роки тому +2

    love u my brother,it is worked for me,thanks a lot,subbed

  • @thuanquoc1231
    @thuanquoc1231 Рік тому +1

    My phone, no fastboot, no TWRP, almost thought I was done but this video saved my ass. Thanks brother, I will buy you a beer if we ever meet.

  • @xGRWLD
    @xGRWLD 2 роки тому +4

    Thank you so much, man! This just saved me so much money. I considered going to the repair shop tomorrow if all else fails but this last resort worked. The only thing that got me stuck is that I can't figure out why it keeps me showing a ram exception error. Til I figured it's just the baud rate being too high I'm guessing? 921600 won't work but 115200 did. So for anyone else having the same problem, I suggest doing the same as I did.

  • @MirajHossain-x8z
    @MirajHossain-x8z Рік тому +1

    Thank you so much for this tutorial, you saved my life! big fan sir

  • @kmanjunath5609
    @kmanjunath5609 3 роки тому +2

    Unbricked successfully.Thank you

  • @peinreborn1142
    @peinreborn1142 2 роки тому +1

    wow its like magic ..thanks so much brother from indonesia

  • @diegowollmer
    @diegowollmer 2 роки тому +2

    Congratulations! The onli one that worked to me... Thanks.

  • @dg7583
    @dg7583 Рік тому +1

    Thanks man, i works fine on my redmi note 9, i' am very grateful

  • @DODO-ry2vq
    @DODO-ry2vq 3 роки тому +1

    Thanks. You save my device, it work.❤️

  • @gabrielrosa3590
    @gabrielrosa3590 11 днів тому

    Really thank you bro! i saved my redminote9 using this video

  • @rahulbalan1997
    @rahulbalan1997 2 роки тому +1

    Life saver, my friends phone was bricked and tried so many method. But only in your method saw result. Highly recommend this method for anyone who is seeing this comment . 🔥🤜🤛🤝

  • @semicolon6499
    @semicolon6499 3 роки тому +1

    Thanks Bhai aapne mere mobile Thik kiya good job

  • @kitsio
    @kitsio 2 роки тому +1

    Thank you so much . I've been searching for hours . . This help me a lot

  • @kaiserahmed2458
    @kaiserahmed2458 2 роки тому

    a big thanks to you sir , i thought my device has been dead forever. after watching your video , i have done it .

  • @worrawatmoolsin9993
    @worrawatmoolsin9993 2 роки тому +1

    Thank you very much. It work for me. Redmi10

  • @geraldmaniquiz7069
    @geraldmaniquiz7069 3 роки тому +1

    you are the best!!! this is 100% working thanks man!!!

  • @zappybarbecue102
    @zappybarbecue102 2 роки тому +2

    Thank you so much for this tutorial, you saved my life! You gained yourself a new subscriber. Keep up the good work!

  • @magdymohamedmosaad460
    @magdymohamedmosaad460 6 місяців тому

    You save me bro my phone was bricked your method give it new life

  • @nikhilkateja
    @nikhilkateja 3 роки тому +3

    Thank you sooo much buddy u saved my day♥️♥️♥️
    I am interested to learn from you

  • @RubelTelecom-Mirpur1
    @RubelTelecom-Mirpur1 3 роки тому +1

    its done! phone Alive from "system has been destroyed"- thank you very much

  • @Zona_UD
    @Zona_UD 2 роки тому +1

    MMMM thanks :(( worked 100% regarts from Spain

  • @bealbwalya2599
    @bealbwalya2599 Рік тому +1

    you are the best. you saved me a million lives. thanks

  • @BASSTHANAWAT
    @BASSTHANAWAT 4 місяці тому

    hey im here to say thank you for your solution, Its work!!! even in 2024 it still workkkk. thoundsand thanks for ya

  • @ניסיםאליהו-ע4ל
    @ניסיםאליהו-ע4ל 3 роки тому +2

    Thank you very much you saved me the device came back to life :)

  • @gabree8302
    @gabree8302 2 роки тому +1

    its realy work thank you so much for that tutorial man!

  • @rangga3538
    @rangga3538 Рік тому +1

    dang you have a new subscriber, thanks for helping me out, but some reason, at the smart phone flash step, i many times have lot error in there, maybe it caused my device detected for COM7 or COM5 and not detected for COM3 like the tutorial, but there still detected as COM3 in UART configuration, I got 3 hours of confusion in this situation, but in another try i use USB method and at full speed, and with battery settings and it worked as in the tutorial. but thanks it means a lot❤❤

    • @thuanquoc1231
      @thuanquoc1231 Рік тому

      MAN, seriously, if I ever you met you in real life, I will buy you a beer. I might have stuck at that step for a week but damn, your comment saved my ass. Thanks brother.

  • @edwymacielsilva
    @edwymacielsilva Рік тому +4

    Cara esse vídeo salvou meu dia!!! Parabéns!!!

  • @madamad928
    @madamad928 3 роки тому +2

    You are my kinnnnng !!!!!!!!

    • @cidinhasena95
      @cidinhasena95 2 роки тому +1

      where can i find this file for the miui i am could you let me know please?

    • @madamad928
      @madamad928 2 роки тому

      @@cidinhasena95 I don't know anymore I'm so sorry 😱 but i finally made it work !Keep searching for DA files and you will finally find the correct one... This video was the one working for me, hope it will be the same for you...

    • @cidinhasena95
      @cidinhasena95 2 роки тому

      @@madamad928 obrigado 🙏

  • @jatinjagtap44
    @jatinjagtap44 3 роки тому +1

    Thanks bro for saving my device ❤️

  • @niroshadilrukshi993
    @niroshadilrukshi993 Рік тому +3

    Thanks in advanced brother ♥️

  • @josephchigomezgombeya7983
    @josephchigomezgombeya7983 Рік тому +2

    Thank you so much for this boss really saved me you are a life saver

  • @muhammedkarabulut1088
    @muhammedkarabulut1088 3 роки тому +2

    bro thank you so much my phone is wake up thank you♥

  • @Obando_obi
    @Obando_obi Рік тому

    Thanks tou you I was able to recover my device, thank you so much!!

  • @accex
    @accex 2 роки тому +1

    Thank you so much bro,.... You are a life saver.....
    Tnank you so much..

  • @UnderratedShikari
    @UnderratedShikari 3 роки тому +2

    More support from Philippines

  • @R3DN4J
    @R3DN4J Рік тому +2

    You saved my life, thanks.

  • @mnmaster5597
    @mnmaster5597 7 місяців тому +1

    thq bro you saved my mobile😍

  • @armorygaming301
    @armorygaming301 Рік тому

    Bro You are ** Really life saver for my phone. Thank you So Much For your This content🥰🥰🥰🥰

  • @tusharpagar5018
    @tusharpagar5018 3 роки тому

    Thank You so much it worked ! Brought the device back to life

  • @hossainahmedmasum867
    @hossainahmedmasum867 Рік тому +1

    Thank you,it's working 100%

  • @ZhafranZ
    @ZhafranZ 8 місяців тому +1

    Saved my life, thanks!

  • @97primemedia
    @97primemedia 2 роки тому +2

    dude u are the best thumb up

  • @danilamaster5213
    @danilamaster5213 3 роки тому +1

    Thank you so much, you helped me restore my phone

  • @abdoalbohali3509
    @abdoalbohali3509 3 роки тому +1

    I did it with success
    thanks a lot

  • @ZayxSt
    @ZayxSt Рік тому +2

    I love you man you saved my life

  • @naufalreihana.f1641
    @naufalreihana.f1641 Рік тому +2

    Thank you so much bro 😆😆

  • @mickespinosa
    @mickespinosa 3 роки тому +1

    Thanks for this video guide, it help me to fix my phone, subbed

  • @niroshadilrukshi993
    @niroshadilrukshi993 Рік тому +1

    I have a question bro. What do I have to do with MTK drivers ? Should I install those two files before starting the steps in your tutorial video?

    • @AlltricksCoIn
      @AlltricksCoIn  Рік тому

      Just follow steps given in video and if driver from folder(shown in video) doesn't install then only try to install one of other mtk drivers

  • @momo_hl
    @momo_hl 2 роки тому

    That method literally save my friend's phone, I hope a method like that gets released for the Redmi Note 9T

  • @richardboticarolim5173
    @richardboticarolim5173 2 роки тому

    Thanks my friend, work100%✓

  • @rayedbangsil37
    @rayedbangsil37 3 роки тому +2

    Hello sir . I just wanna ask for help , im not getting past the Updated BTP . when i click 1ST RUN THIS on the folder . It’s not showing me waiting for device . Instead it shows me Python was not found; run without argument to install from Microsoft store . How could i get past through this

    • @blackopscodm8616
      @blackopscodm8616 3 роки тому

      I tryed it on an other pc and it worked change your version of phyton mine worked on the 32bit version of the latest phyton

    • @cidinhasena95
      @cidinhasena95 2 роки тому

      @@blackopscodm8616Onde encontrar essa versão amigo ???

  • @cesardiaz1675
    @cesardiaz1675 Місяць тому

    i love you bro thanks for this video, greetings from Chile

  • @hanagakiarasawa3171
    @hanagakiarasawa3171 3 роки тому +3

    Bro, i am literally crying right now. I tried a lot of things to fix that. I got fucking hard brick. Like I can't get recovery or fastboot. I tried your fix and it ain't worked by your way. But I'm in tears just plugged that phone at 10th hopeless attempt and it WORKED THEN STARTED FLASHING AND FLASHED SUCCESSFULLY ! Before that it ain't got succes on that bypassing. But anyway it worked. So love you and thanks a lot. I thought i lost it♥️♥️😫😫😫😫

  • @sumgayitcityschoolnumber3917
    @sumgayitcityschoolnumber3917 Рік тому +1

    You saved my life

  • @mohannadaffan5487
    @mohannadaffan5487 2 роки тому +1

    thanks for you its working 100%

  • @AnasYaseen
    @AnasYaseen 3 роки тому

    After doing step 3 and getting Protection OFF in the cmd, I opened SP FLASH TOOL and followed the steps you showed and downloaded the fastboot global ROM for my device, but when I ran SP FLASH TOOL I got a rid bar saying DA 100%, after that I removed the phone from the usb port, and now everytime I connect it I keep getting device unrecognized errors, like every single second with error code 43 on windows 10, and now I have a black screen instead of having a bootloop. Any help would be appreciated

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому

      Why did you removed before flashing it

    • @AnasYaseen
      @AnasYaseen 3 роки тому

      @@AlltricksCoIn I tried flashing it multiple times and kept getting errors, the bar was red and it didn't work, I wanted to change the usb port but ever since then the phone screen is black and when I connect it to my pc I get USB device not recognized (Error code 43) on windows 10 and on my brothers computer I get the same error

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому

      @@AnasYaseen update mtk drivers and try

    • @AnasYaseen
      @AnasYaseen 3 роки тому +1

      @@AlltricksCoIn Man I fucking love you, I went to a repair shop next door and told him my phone screen is black, he somehow pressed volume up and power and the bootloop started again, and he didn't ask for any money because it took him a second, so I went home and I followed your video again on the bootloop and it worked like CHARM.
      You are amazing, thank you for saving my phone ♥

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому

      @@AnasYaseen glad to know it helped you

  • @viciosdelicios
    @viciosdelicios 3 роки тому +2

    gracias master el mejor 100% efectivo el metodo recomiendo al 100 el video suerte y mucho exito

  • @jaipalsingh7254
    @jaipalsingh7254 Рік тому +1

    happy holi man saved my day

  • @ddysign
    @ddysign 3 роки тому +1

    I got error and they said i must do that without battery, have u got battery pluged in during execution?

  • @fakerx4480
    @fakerx4480 3 роки тому +2

    I have redminote 9 and stuck in logo and restart again n again and I can't go in fastboot mode to?? Is this method will work??

  • @satbirsingh7910
    @satbirsingh7910 Рік тому

    it really worked.. thank you

  • @hasanalidemir5962
    @hasanalidemir5962 3 роки тому +1

    thx a lot my friend god bless u

  • @payalmaity8092
    @payalmaity8092 2 роки тому +1

    Love u so so so so much sir😍😍😍💕💕💕💕💕💕💕

  • @murilosilvaoficial
    @murilosilvaoficial Рік тому +1

    Você é 10! cara show de bola top!!!

  • @edinsonrodriguez6039
    @edinsonrodriguez6039 3 роки тому +3

    millones de gracias gracias a tu tutorial pude levantar uno que no quería con nada muchísimas gracias te ganaste un suscriptor

  • @elisena2361
    @elisena2361 2 роки тому

    Hello why when I go to install pyusb pyserial json5 it writes me pause 5 and when i press the space bar, the command prompt just closes.
    and in 1ST RUN THIS nothing is empty.
    please help

  • @itsDRiE
    @itsDRiE 3 роки тому +1

    YOU ARE THE BEST BRO!

  • @Kumara03
    @Kumara03 2 роки тому +2

    Thanks for bringing my phone life back but after unbrick the bootloader is locked tell me how to unlock bootloader using bugjaeger app please make a video

  • @paulpete2028
    @paulpete2028 Рік тому +1

    good job is works,thanks

  • @Kririto
    @Kririto 3 роки тому +1

    Thank you sooo much bro. love love love.

  • @jngnbetingkahludasarbocilh4166
    @jngnbetingkahludasarbocilh4166 3 роки тому +1

    how about the phone cant connected to laptop?,like unplug auto,then plugged in the unplug again and llike that

  • @NAVEEN_GALLAGE
    @NAVEEN_GALLAGE 3 роки тому

    Thank You Very much Dude
    Highly Appriciated

  • @lennegy
    @lennegy 2 роки тому +1

    installed MTK Drivers, but when you connect the phone to the PC, in the device manager, it is displayed as an unknown usb device. Driver signature verification disabled

    • @AlltricksCoIn
      @AlltricksCoIn  2 роки тому +1

      Press power for 10 sec then try connecting with vol down

    • @lennegy
      @lennegy 2 роки тому +2

      buddy, it worked, the phone turned on thank you very much!

  • @sigmasirio
    @sigmasirio 3 роки тому +1

    Hi, I don't understand if this procedure keep all my old data inside the phone o will delete everything, I need to extract my old photo. Every thing work fine until flash tool, I'm waiting for your answer. Is it important know the old MIUI version? I don't remeber it, can I install the last one? Thanks a lot

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому +1

      You will Loose everything on internal storage

    • @sigmasirio
      @sigmasirio 3 роки тому +1

      @@AlltricksCoIn what bad news, i read about a lot of guys who were happy with the trick, so they were only referring to saving the phone, not recovering the data. So the indication of SP flash tool where it says "update firmware" is fake, they could write format and install new one. The only way is then to install only the recovery type TWRP? Thanks a lot

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому +1

      If you select format in sptool you will loose your imei

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому

      You can try unticking userdata before flashing... I hope that helps u ...use same miui rom version you were on

    • @sigmasirio
      @sigmasirio 3 роки тому

      @@AlltricksCoIn I was able to do the low-level dump of the memory partitions and I was able to find system files with the indication of the MIUI version installed: 12.5.1. I must be sure that flashing with SP flash tool and indicating Firmware update does not corrupt personal data, I cannot make attempts, I believe the data is encrypted and therefore I need "something" to decrypt it. TWRP seems to me that it allows you to enter the unlock code and then see your personal files, I am not interested in saving the phone, I am only interested in the data. The problem is that I can't install TWRP from SP flash tool.

  • @flacochris100
    @flacochris100 2 роки тому +1

    Nice video!
    Could you please make a tutorial to unbrick a POCO F3 with hard brick? It would help me a lot.

  • @nightfury2328
    @nightfury2328 Рік тому +1

    Thank you so much brooo, you save me

  • @derrickrancho
    @derrickrancho 2 роки тому +1

    Hello have tried the process and am getting SP flashtool error ( error status_ext_ram_exception 0x0050005 ). Is there anything I can do? my phone is bricked and cannot enter recovery/fastboot and therefore stuck

    • @AlltricksCoIn
      @AlltricksCoIn  2 роки тому

      Need to bypass quickly again when it get stuck at red bar for more than 10 sec. And click on download in sptool

    • @derrickrancho
      @derrickrancho 2 роки тому +1

      @@AlltricksCoIn I managed to do it. I had to ✅ the DA authenticator in Options bars. it's now working. thank u though.

  • @sachithamadupa6169
    @sachithamadupa6169 3 роки тому +1

    When connecting usb do i need to turn off mobile ?

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому +1

      If your device bricked it's already off...
      If it isn't bricked .. turn it off

  • @limperez4717
    @limperez4717 3 роки тому +1

    thank youu very mucch 😍😀

  • @vadimos9994
    @vadimos9994 11 місяців тому

    thx bro verymuch u save my phone

  • @gokunub1854
    @gokunub1854 3 роки тому +1

    volume up and power butter will turn on fast boot mode?

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому +1

      If you have fastboot access flash via it... By the way fastboot will open with volume down + power

    • @gokunub1854
      @gokunub1854 3 роки тому

      @@AlltricksCoIn bro help kardo jab bhi mai apne phone mai recovery ko ta hu tab internal storage mai andriod wali directery nahi dekti

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому

      Only android wali directory?

    • @gokunub1854
      @gokunub1854 3 роки тому

      @@AlltricksCoIn kuch alag number wale folder dekte hai

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому

      Encryption issue ... Which device

  • @GaryByrneDublin
    @GaryByrneDublin 3 роки тому +1

    My phone is stuck on a bootloop. I've installed the driver and im trying to run the updated BTP part but the phone is not being recognised. Any ideas please?

  • @abdel369hady
    @abdel369hady 3 роки тому +4

    thank you for the video, my phone is stuck in infinite bootloop after flashing wrong misc.bin, now recovery and fastboot are unavailable and only time my computer recognizes the phone is when i press vol + - and power together. it recognizes quickly and disconnects immediately. i was able to install the drivers from libusb-win32 but i'm now stuck at the updated BTP folder. phone is in infinite bootloop, can't turn it off so i can connect it with vol -. nothing works. any suggestions? thank you in advance!

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому

      Press power + volume up... As soon as u see blank screen connect ur device with keep pressing volume up

    • @abdel369hady
      @abdel369hady 3 роки тому

      @@AlltricksCoIn volume up never gets recognized... volume down gives me sound in windows and the 1.RUN THIS command gives me this error: File "C:\Users\+++\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 64, in open
      raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
      serial.serialutil.SerialException: could not open port 'COM3': PermissionError(13, 'Device not ready.', None, 21).
      what can i do else???

    • @AlltricksCoIn
      @AlltricksCoIn  3 роки тому

      Where did u put the folder

    • @abdel369hady
      @abdel369hady 3 роки тому

      @@AlltricksCoIn i just moved the folder to c before i saw your answer. it's now in C:\UnbrickNoAuth\Updated BTP\Updated BTP but still no luck... i'm exhausted nothing seems to work...

    • @abdel369hady
      @abdel369hady 3 роки тому

      @@AlltricksCoIn here is the full code (removing my userfolder in code), btw i am using vmware on mac latest python 3.9.6, till now everything worked fine don't know if this might be a problem or not..
      [2021-06-30 20:01:04.920149] Waiting for device
      [2021-06-30 20:02:05.185174] Found port = COM3
      Traceback (most recent call last):
      File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\main.py", line 213, in
      main()
      File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\main.py", line 42, in main
      device = Device().find()
      File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\src\device.py", line 45, in find
      self.dev = serial.Serial(port.device, BAUD, timeout=TIMEOUT)
      File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 33, in __init__
      super(Serial, self).__init__(*args, **kwargs)
      File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py", line 244, in __init__
      self.open()
      File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 64, in open
      raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
      serial.serialutil.SerialException: could not open port 'COM3': FileNotFoundError(2, 'System can't find file.', None, 2)