Do you take the spark plug ring off when you put the temp ring on? I was told to that on my 2 stroke but not sure about 4 stroke, and are temp ranges same as 2 stroke?
Great video! On the trail tech website I couldn't find any speedometer for my bike yamaha tt600r 2003 which hasn't battery and electric start.. can any of these products work for me?
I have never tried it, but they are supposed to work with AC power. One manual says 6-400VAC. Check this out : www.trailtech.net/media/wysiwyg/pdf/010-ELV-07.pdf
Great video! Really helpful if your thinking about buying one! Nice to see some fresh content on your channel!
Thanks Alex!
Awesome. Will be installing this on my moped.
Hi ...please this vapor shows a mth ?
Not sure what a MTH is. If you meant MPH, then yes it can display MPH or km/h.
Do you take the spark plug ring off when you put the temp ring on? I was told to that on my 2 stroke but not sure about 4 stroke, and are temp ranges same as 2 stroke?
I remove the crush washer on the plug so the plug sits at about the same depth as before when using the under plug sensor. Temp range is similar.
Great video! On the trail tech website I couldn't find any speedometer for my bike yamaha tt600r 2003 which hasn't battery and electric start.. can any of these products work for me?
I have never tried it, but they are supposed to work with AC power. One manual says 6-400VAC. Check this out :
www.trailtech.net/media/wysiwyg/pdf/010-ELV-07.pdf
90GTVert Thank you very much!
Great video! Ty!
Thank you.
it is compatible for any motorcycle?
It is a "universal" product. With the right sensors, it should be able to work on a lot of different applications.
@@49ccscoot how about for fi engine type? i bought china type digital odometer but the rpm doesn't accurate.
@@crisimplefitness522 If you tie it into a coil + lead, it should work. It can be adjusted for different pulses per revolution as well. 0.5, 1, or 2.
@@49ccscoot i just tie wire of the rpm to the enginsion coil. but the signal of rpm is to low..
@@crisimplefitness522 You probably need to change the pulses per revolution setting to correct it.