How to Remove a Hologram With a ROTARY MACHINE
Вставка
- Опубліковано 5 жов 2024
- Join the channel to get access to benefits:
/ @amddetailing
#rotary #hologram #remove #dewalt
The video shows the way in which the resulting holograms are removed using a ROTARY MACHINE. You can do it very quickly and efficiently by following the video and watching CAREFULLY.
Enjoy the video - Авто та транспорт
Hologram! You are very good in your job. As a beginner with no experience i found your video's super helpful.❤
Tnx and enjoy
Hologram. Glad you verified the fact that a rotary buffer can dothe job even better than a dual action polisher in the final stage.
Love your video amazing.
People are always trying to talk me out of the rotary
Thank you for showing me rotaries or amazing tools
Tnx bro and enjoy
HOLOGRAM 👍👍 Talk about priceless information. One of the best on the net.
Tnx friend and enjoy
Wow looks great. I just bought a rotary and am a bit scared of holograms and burned edges but will give it a go.
the rotary polisher in expert hands can do everything very well and quickly. I appreciated that you used the same pads and the same Polish on both polishers
Ops i almost forgot hologram 👍🤣
Yes my friend
There is no work without a rotary machine, fast and efficient
@@Amddetailing no doubt. moreover as a detailer which I am too. you have really high skills and abilities👍😊
@@l0r3nz0rm thank you my friend, that's why I thought that you could transfer it to UA-cam to make it easier for many people who have problems
@@Amddetailing share is a huge deal knowledge is a gifts but share it's more important
Rotary, a wepon of mass paint correction
Hologram …
Love the videos as always helpful content
Hvala brate😘😘😘😘
Alene ti i sa kalodontom da poliras bilo bi vrhunski👌svaka cast
Hvala prijatelju nadam se da pomazu videa
Hologram. Love from the UK. 👌
Tnx bro,enjoy
Can you tell me please how to remove scratches from windshield?
Commenting for the algo 👍👍👍
Best of the best.. Love it man
Tnx bro
Like you vídeo thank for the hologram tip
tnx my friend
Great video but i have a question. Do you use 1 pad per panel, or do you clean the pads in between? Also do you prime the pads so not to start with a dry pad?
the pad is cleaned as soon as one part is finished (40x40 or 50x50 part of the panel)
Hologram
Informative video, thanks
Tnx friend and enjoy
Un bon travail professionnel top
Tnx bro
Love this ❤ always helping ur videos
Heat.
Pad skips off paint.
Polisher tries to run.
Pad isnt flat at all times.
Apply more than 1 gram of pressure. literally.
Pad gets dry or dirty.
Fast rpms and slow passes or vise versa.
Too heavy pad or polish. (even if the pads says "finishing").
Thats all i can think of for now but if you did any of this for even a slight second... you must redo that section because you 100% left tracks
Hologram..love the video bro 🤩🤩
Tnx bro in addition to work, I try to show you all the most effective ways
You are master 👌🙌💪
Hologram...da li moze da izvuce samo Ewocar 2 Fine cut ili mora obavezno posle neka antihologram pasta?
Mozes to i jeste njihova i srednja i zavrsna pasta u komb sa drugim sundzerom
Nice HOLOGRAM remove. Thanks for tips. Maybe I'll be encouraged too to polish my wife's not so greatly washed "new to as" car. Never seen that badly maintained black paint so far what that is. Almost as bad than this video's car had.
Tnx friend and enjoy
Alen odlicno video. Imam isti dewalt . Sa 600 si raznosio a sa 800 radis na hologram?
Ili radis na 1000
Jas cut radim na 600 a koristio sam Da za finish.
Antihologgram pastu (polytop)sam radio sa istom brzinom sa kojom sam i razmazao pastu (600) uz blagi pritisak na pocetku i na kraju bez pritiska
@@Amddetailing od pastama koristim hc 4000 za cut od zvizzer i fc 2000 isto zvizzer za finish
7:53 Fantastic
Tnx
so whats the trick? :D just to use hologram removal paste with rotary?
Hologram
To more videos sir!
Hi.
Little bit dont understand whats the quicker with rotary. 2 pads, 2 polishers, too much work.
Get DA , Sonax PF 4-6 , one pad (medium or coarse foam ) one cross pass higher speed -slow motion, one cross pass lower speed quickier motion and light correction 40x40cm with good finish done in 2 minutes.
Im looking for cordless dewalt rotary (have cordless DA) but im not sure if i need that machine.
The video was recorded "how to remove holograms by rotation" because not everyone has a DA machine, and with a DA machine it is easy to remove, the old school is the best, and that is rotation
@@Amddetailing thanks.
I m looking for rotary to try final step with fine/ultrafine polish or prewax cut/glaze like Dodo lime.. to remove maybe some micro marring by DA and the best finish.
Can I make some holos with fine polishers + rotary (600-800 rpm) ?
( Never have doing with rotary).
@@zzo28 yes try
Good video
I’m new to your channel, why do you refer your audience as” Boys and girls”??? ….just wondering!😊
saying😄
@@Amddetailing ???
You can’t answer a simple question?
@@VIM97 what else would it be?
@amd detailing What would be the equivalent to the ADBL pads in USA thanks.
I don't think they are available in the USA, try contacting their official website
Why do holograms accour?
Hello. Which model dewalt rotary is this exactly? Thanks
Corded (DWP849X)
@@Amddetailing thank you AMD
stock backing plate? I can’t find the thread size.
If you use the fine cut with softer pad?? or just the ani hologram i think its too much steps.
Fuck ya it is. Be there all day
Cool video dude!
I didnt understand, if its needed to use pressure for cutting and polishing? When do i have to use pressure for buffing? When using wool?
there is no pressure on the machine, you let the machine work by itself (in some cases you have to press the machine, but very little)
Hologram!!!! 🔥
Enjoy my friend
no HOLOGRAM left!!! 👌
As requested. HOLOGRAM.
Enjoy my friend
Holograms!
Enjoy my friend
Hologram
Enjoy
holograms
HOLOGRAAAM
HOLOGRAM 🤙🏽
Enjoy my friend😉
HOLOGRAM! What else!?
Yes😁
Holoooooooograaaaaaammmm
HOLOGRAM
Hologram 😁
Enjoy 😁
HOLOGRAM!! NO MORE !!
Yes bro,enjoy
Hologram
Holograms
HOLOGRAM
Enjoy my friend
Hologram
Hologram
Hologram
Tnx and enjoy 😉
Hologram
Enjoy my friend
hologram
Hologram
Hologram
Hologram
Hologram
Enjoy
@@Amddetailing what year is the Porsche ?
@@M.E63 2020 or 2021
@@Amddetailing I thought most new cars are using soft clear coats, even bmw used to use hard paint but now is soft
HOLOGRAM
Enjoy my friend
Hologram
Uzivaj😉