How to adjust Mercedes Benz W203 Handbrake 2003-2007. C ,E ,G & S class.
Вставка
- Опубліковано 26 сер 2024
- Hi guys, this video is based on how to adjust handbrake of Mercedes Benz. It’s same in most of the the Mercedes Benz Models.
It’s saloon car , go to back seats pull them up & Remove Carpet. Then you will see 1 plate with 3 Bolts, Remove that plate by undo 3 bolts. You will see 1 bolt (see video) turn that bolt clockwise. Please be careful while adjusting bolt. Only adjust accordingly . How much it needs to be. Don’t over tight the bolt.
Most cases you will need to turn 5-10 times. But it always depend on requirements.
Please be careful while adjusting handbrake.
Thanks for watching.
Thanx, today i removed the rear brake drum and cleaned/checked the shoes etc.
So now i will investigate this area to clean and grease up !!
All done for prevention on my 2008, CLK !!
Thank you buddy very simple and quick to the point video
Yes great thanks Tony - I didn't think it would be that easy. Probably saves me 60 squids of a mechanics time !!!!
Verry help full thank you
Legend. Thanks for this
Thanks for that it was very informative. Now I could tighten mine.
Quick and useful video - I learned something - thanks
Bro thank you very much for the info
It helped alot thanks :)
Thank you! That solved my problem.
What problem were you having if you don't mind me asking? Thanks in advance
@@TooBlessedToStress88 You feel like the car is rolling after you stop.
Some mercedes from 2007 have it under the car above the cardan shaft
Thank you
Brilliant
Thankn you for the video. I was wondering what was your issue before this and why you did this?
Thank u paji
Work on merc 2011 as well?
The right way is to tighten it from the brakes, but i guess that's a temporary fix.
I would agree, as today i removed both rear brake drums and cleaned and checked, but one came off easy the other difficult. So there was an imbalance !
So ive adjusted it now at the shoes.
This has now shown me that i should check here, and now clean and grease everything to prevent a problem @@
What issue did you have before?
And what does tightening that bolt thread do?
Thank you
You only needs do this if your car’s handbrake is not working when you press full pedal down . Tightening bolts thread will adjust your car handbrake and it will work as it should.
Thanks for your enquiry.
@@tonysingh6303 you could also adjust the Drum brakes in the rear to maximice effect.
My c200 does not have the access plate under rear seat . Any ideas ?
Look from under the car, it will be right above the rear diff
@@jawadhussain2241 thank you
Thank you
Thank you