6 Ounce Gold Refine COMPLETE REFINING Pt3
Вставка
- Опубліковано 16 тра 2024
- eBay Bar Necklace: www.ebay.com/itm/266853370413...
eBay 1 gram pure gold sponge: www.ebay.com/itm/266853368203...
eBay pure gold crystal electro refined: www.ebay.com/itm/266853367425... - Наука та технологія
How many of you all noticed that chunk of gold sponge fall out his melt dish?
The one off the back, but there was also a small chunk near the front bottom corner. Then you could see all the gold drops along the sides of the melt dish. A little borax along the sides and he might get a gram or so out of that melt dish.
Yes
I’ll get it and add to my next batch of karat gold - no worries.
I was just thinking, “There’s $30 just sitting on the brick…”
Ya I was wondering about that 🤔 lol
Love watching your videos. They are addictive. Don't know why but it Never gets old. Must be the shiny yellow metal. Terrific content.
Thank you!
@@sreetips Pls help i need advice..Im new at this but was fasinated by few vids back you growing the silver and im a rookie and wanna start doing the same so equipment wise looks like your using a laboratory power supply found one on ebay is a maximum of 30V 10A DC Power Supply Adjustable 4 Digit Display Laboratory Power Supply..Also you said you were using nitric acid but what percentage is that?..Because the ones i can find online is rated at 68% so will that be suitable and what outher acid where you using might have been sulphuric also what percentage?..Im a total rookie at this but really wanna learn but not die in the process anything you can tell me chemicals percentages would be awesome..Looks like it uses a really small amount of electricity as well for being left on 24/7 so i can't see it hurting the power bill too much as well..We all gotta start somewhere and just in the learning stage appreciate any help thanks
Meltdown vapors! Aha! No heat hood - acetylene oxygen vapor depositing a particle or possibly just breathing hot air - if you was blindfolded and can recognize the smell of a process then - something is making it to your nose and linings - shouldn't be no irritation of linings - we love ya man for your pursuit of genuine authentic firsts and pure
Did you notice the pan doing a little jiggle back and forth as the gold was drying? See at 5:00 when you remove the water. That jiggle comes from the heating coil on that hotplate. It turns on and off maintaining a certain temperature and when it heats and cools it expands and contracts moving the pan back and forth just a little as it does so. You would never see it without time-lapse.
Another great series, Sr. I thank you again for sharing your hobby with all of us. It never gets old.
Live the crystalline structure you can see when the gold freezes. Another great video.
Never seen this magnific chemical process.
Absolutely interesting.
Best congratulations!
Great result and some nice little bars!
You drop a bit of gold at 5:45 and you never show yourself picking it up. This made me feel uncomfortable. Please confirm that the bit of gold was retrieved.
came here to see if it was just me - thanks
Your answer its in the fist video this serie.
haha, same. Also, this is my first time bother to read any comments on a sreetips video. Sree's got a high booty bot ratio.
Yep, I'd guess a 1 to 2g chunk of powder. There was also a smaller piece that fell off to the left in the last batch he put in the dish.
@@menotume and a few beads around the sides of the melt dish
That HAS to feel incredible to hold those solid gold bars after all that work. What a reward!
I love all your videos. I am sitting here trying to think of how you can get more views and what other content you can do that fits into what you've already done.
Gold videos:
1) extract gold from ore.
2) refine gold that was found in the ground (like from panning)
3) improve refining methods from the high view videos (gold fingers, computer scrap, plated stuff)
Silver Videos:
1) automate silver refinement (maybe a screw conveyer or an auger that gets the silver out so it wont short), this might lead to different container shapes.
Other videos:
1) Do amateur chemistry to make the chemicals you then use to refine gold/silver
2) jewelry prep. make improvements to speed/quality?
3) get copper out of waste solution and make something to sell to us.
If I think of more I'll post in whatever the latest video is.
Thank you!
Great series, again! Love to watch.
Sreetips, that's not a Beaker, that's a 45 Gallon Drum dude! I love the way you roll my man 🙂
Yep - those pours don't get any less stunning. Great refining series again, Kevin. 👍👍
Beautiful job as always!
This never gets old, Thank you Sreetips!
These uploads are a perfect example of why i watch your videos. Pefecting techniques keeps you ahead of the game, and saving time. Amazing
Thank you for teaching.
Would love to see more vids on buying gold and silver and the total cost breakdowns
He won't do that. He avoids those details to protect the system that he and his wife have of acquiring the material they refine for themselves.
I’ve tried to convince Mrs sreetips to let me shoot video of her in action. But she refuses because it very cut throat. And I must respect her wishes
Beautiful bars!
The King of Inquartation dominating the gold refining arena.
You are welcome. There was more vapour from the precipitate, while being heated in the melt dish, than we usually see. Spectacular bars! Thank you Sir. 👍👍🤟
I noticed that.
@@sreetips never mind, I'll delete my own comment...
Adding the note here now... @sreetips since it smelled like wood I am going to guess it was sulfur dichloride. Was there briefly a cherry red liquid? No, I did not see that since it was dry enough so that makes the allotrope a whitish gas and pungent like burning wood! Bingo! That is what it was, not trapped H2O in the powder gold at all. I stand corrected from my earlier comment of it being just traped H2O. It was trapped SCL2 (g). That is a nasty gas, would have been better to have your respirator on you old salt dog! It forms chlorine containing acids on contact with your damp mucous membranes and as a red liquid rather than a whitish gas is highly corrosive and toxic. As a gas it did little harm if you rinse your nose and mouth with 1/2 normal saline and an infant nose syringe made of soft rubber or now a days silicone -if not done you will have a bit of membrane peel and that would be the extent of it over the few times you were exposed, take care in the future to pulverize any gold sponge better while drying please or use a respirator as you have in the past. That explains the thick whitish gas discharged several times, make a note in the book so someone else reading it will be warned as well. Folks, all is well, this (gas precipitation) is the best method, still, it was a lesson for ALL. That is a great camera and lighting when I went back and looked it is just as I have heard it described by and in my uncle's crabby hand written notes.
I didn’t see and red liquid.
@@sreetips as was said in the comment where I was talking out loud to a dragon naturally speaking app... I too did not see any red liquid so it was a gas form of the compound...
Let me find it in the clipboard, ah here it is.
@sreetips since it smelled like wood I am going to guess it was sulfur dichloride. Was there briefly a cherry red liquid? No, I did not see that since it was dry enough so that makes the allotrope a whitish gas and pungent like burning wood! Bingo! That is what it was, not trapped H2O in the powder gold at all. I stand corrected from my earlier comment of it being just traped H2O. It was trapped SCL2 (g). That is a nasty gas, would have been better to have your respirator on you old salt dog! It forms chlorine containing acids on contact with your damp mucous membranes and as a red liquid rather than a whitish gas is highly corrosive and toxic. As a gas it did little harm if you rinse your nose and mouth with 1/2 normal saline and an infant nose syringe made of soft rubber or now a days silicone -if not done you will have a bit of membrane peel and that would be the extent of it over the few times you were exposed, take care in the future to pulverize any gold sponge better while drying please or use a respirator as you have in the past. That explains the thick whitish gas discharged several times, make a note in the book so someone else reading it will be warned as well. Folks, all is well, this (gas precipitation) is the best method, still, it was a lesson for ALL. That is a great camera and lighting when I went back and looked it is just as I have heard it described by and in my uncle's crabby hand written notes. I will not correct my prior comment but I will leave a note to read it here in full for folks.
You're getting pretty good at pouring ingots, they turned out nice. I do enjoy that method of reanimation of the gold, for the same reasons as you. ✌️😎
Just the first bar you had on the the scale (57g) is currently $4,364 by itself, so that's roughly 12K in cash value for all three. You're gonna need a bigger safe if you keep this up! Thanks for the series, always fun to watch.
that new beaker is massive I love it the gas precipitation it the best love the way the gold comes out so clean👍
i think the hydrogen proxied gas precipitation makes the cleanest. that i have seen you do so far.
H2O2 dissolve, SO2 gas precipitation. A good combination for pristine GOLD.
Beautiful!
Enjoy the content! Thank You Sir!
Love what u do from the UK 🇬🇧
Best gold channel on UA-cam.
Thank you
Amazing gold bars, great job sreetips 👍
Gooooood evening from central Florida! Hope everyone has a great night!
And good evening from just north of London.
Goooood evening!
@@essexfarmer9610 howdy! 👋
And from south Florida
My dear friend...hello🙂🔥
God bless yoy🙂
thanks for videos .. ❤
Excellent Work Sreetips 🐉 God Bless 🙏
Wow, those pours were so damn precise!
I’ve found that the key is getting that graphite mold real hot.
Lovely bars!
Turned out great 👍
That beaker is comically huge. We need more of it.
Excellent video sir six stars
Awesome videos and absolutely beautiful gold bar's thanks for sharing sreetips
3 very beautiful bars of gold. 👍🏻
3 lovely gold bars!
Call me crazy. But I've watched alot of your videos and this new method of refining the gold looks better. I noticed a slight difference. Looks better. Thanks again for your videos.
😎👍🇨🇦
love the gold videos
SO AWESOME!!!
3 videos, total process took some time, the yield: perfect. Minus the iron from that O2 process. Loved it, Sreetips is where to get gold from.
Thanks for the video
Love your videos sreetips, they are fascinating to watch. Forgive my ignorance but is this refining process considered alchemy/transmutation or chemistry or is it kinda both? Thank you 👍
This is gold refining, pure and simple.
Great video as always! Hey, if you're looking for an idea for a video, I personally, would find something like this very interesting.:
Before you begin, weigh everything, the jewelry, your jugs of acid, your water bottles for rinsing, your waste container, your silver/base metal container, etc., etc. etc. And then after all is complete, weigh everything again and see if there is a proper accounting for all the mass. Just wondering if maybe you could get an idea of how much of the mass is leaving via that brown vapor during the dissolving process and how much silver/base metals was recovered, etc. I'd imagine you might have to do some intermediate weighings too. For example, when you're drying the gold powder maybe you'd want to weigh it wet before drying so you know how much of the water you used from your water bottles for rinsing just went up in steam, as opposed to going into one of your waste receptacles. I don't know, maybe just me, but I think that would be kind of cool to see.
Love this content so much Sreetips! Where does all that waste solution go? To a waste management place?
Waste treatment is easy and cheap.
Beautiful ending of the third part of your refining video! The walls of your working place must shine golden after so many years of gold smelting and the condensing gold vapors on the surrounding surfaces ! Do you also recycle your airfilters in your mask and aircon, similar to the jewler´s dust ?
I’ve never tried it.
Really great! I noticed when you were melting down the silverware a couple pieces seemed harder to melt maybe they were silver coated metal
It was all 800 parts per thousand silver flatware.
Awesome mr Sreetips....beautiful 999 gold a great precipritation....your work is amazing and great science aswell love your chanel mr Sreetips greetings from the Netherlands
Thank Netherlands.
Sree.. you’re a wizard!
Thank you
Is there an episode yet titled “Sreetips workshop sweeps” in which you refine your vacuum cleaner bag? I’d love to see that one!
I don't know what you were doing camera-wise with those close-ups of the gold melting in the melt dish, but I have to say that there's a beautiful artful quality to the video. Maybe it's the saturation of colors or some other strange artifact of the video settings within the camera, but I haven't seen such a visually satisfying sequence in a long time. I would call it real art.
Well done.
Excellent, thank you
At the end when you showed the losses and explained that something in the K gold must have been non gold, is a great example of the reason to hobby refine. I bet there are a lot of folks who hold their gold as karate scrap but have a lot less gold than what they think they do. Great refining series. I have a video request, can you do an in depth review of all the components you use to assemble the SO2 generator?
He was relocating some of the gold during rinsing and pour offs into the waste refining stock pots, eventually that will be recovered, but to me that is a waste of time and resources if you've already got the gold nearly pure to pour it off into a lesser pure mix then means you are wasting that effort. Instead to pour it off into one dedicated container to let it settle out and then after it has settled out you could pour that solution off, but i think that would be a good base to see if you could work with just that solution to get the gold out without recontaminating it with other metals. I'm not sure how that would go, but perhaps some aquaregia and then an SO2 bubble precipitate...
Also I've already mentioned that he's wasting a fair amount of nitric acid in later boils and rinses that could be reused for his initial acid boils. Pouring that into a silver stock pot loaded with sterling silver is a big waste of time and effort because later he's having to reprocess the silver out of those solutions again. Getting huge buckets of cemented silver to then reprocess again to remove the copper and other metals. Just adding extra work for himself.
Sorry to harp on this, but I think it important to be efficient with time and resources. :) And sure if you are happy with what you are getting than you can easily ignore my thoughts, but for others who are reading along I think it worth to think about.
I think of it this way, when working on a project I don't want to introduce more Gremlins by making it more of a mess. In gardening this means weeding from the uphill and upwind areas (energy and time flows and edges are important). In metal refining it means not doing things that push your results backwards towards the other contaminants if you can help it.
Awesome video as always Sreetips but I was wondering do you know of any other precious metal refining channels besides yours I've been looking all over.
To be honest, mine is the only one I watch.
@@sreetips gotcha thank you Sir
wow,, cool bars man
I must say I’ve wondered how beautiful a “ gold cell “ of equal proportion as your old silver cell would look at harvest time I know that has to have crossed everyone’s mind and also since I’m asking this hypothetically would you feed 10k 14k etc through it ? And of course would it grow an insanely beautiful crystal forest? Hmm 🤔 I wonder 💭
There’s a way to grow high purity gold crystals. But it’s complex and requires special apparatus. I can grow pure four nines gold in my electrolytic gold cell. But the gold doesn’t look the same as the silver crystal does. It’s more nodular. But still beautiful in its own rite.
Kevin, how long have you been collecting all of that lab-grade glass? You've got quite the collection! Would love to see another video where you show off your shop. Great video, my friend. Thank you!
I accumulated it over the last 14 years. When I thought of an experiment I’d figure out what glassware I needed, then went on eBay and ordered it. I had a small chemistry setup in my basement when I was about ten or twelve. But I abandoned it when I got in high school and discovered partying and girls. My current setup is a continuation of that time. Only now I can afford nicer stuff to practice with.
Beautiful denouement. Love the gold bars.
I figure it is not very important, but I am curious... Have you ever considered taking the extra time and weighing out one once at a time to melt and make the bars?
New word for the day, denouement: the final part of a play, movie, or narrative in which the strands of the plot are drawn together and matters are explained or resolved
@@sreetips 😜 It was your closing third act. 😂
I always learn new things by reading the comments. Answering question (if I know an answer),is the best part of the experience. I get good tips and ideas
again again, so good
Very nice. You give me the urge to invest in some equipment and set up my own personal refinery. Where do you get rid of all your dirty solution at?
Waste treatment.
Sweet Triplet Bar's!!!; )
انا مشارك في القنات ممكن سوال ماهي الحماض التي تستعمله
I use hydrochloric acid 31.45% nitric acid 68% to 70% and sulfuric acid (Rooto Professional Drain Opener) 93%
Hello Mrs and Mr Sreetips.
Early morning here in Norway today.
The sun is already shine this summer day.
I have many clip to see from you🔥🌺🌺
Hope you both have a lovely day 🙂
God bless your humble hart🔥
Arne
It’s finally here! Enjoy those warm sunny days Arne.
Thank you my friend..And same to you Sir ❤️
Did you do something different with the camera when you were melting this time around? That gold looked extra shiny under that blow torch buddy.
I had an extra light shining on it
I hope that you are wearing a respirator for this! Sometimes the out gassing from those melts is intense!
Was wondering do you process your paper storage on camera or is that something you do off camera?
I’ve got a bucket full of filters that I need to process. I’ve done them in the past. Now they’re due again.
Wow!
Very satisfying
0:58 I almost choked on my Reese’s puffs when the video sped up and I thought there was going to be a spill! 😅
Let me tell you, I’ve experienced some spills recently, not much, but in refining every little bit counts. These never would have happened if that pesky camera wasn’t in my way all the time.
@@sreetips a camera? The camera is very anticlimactic - dang - most fiddle stump operations say same thing - they spend more time fussing with camera - it's not easy
Bar Bar Bar !Jackpot!
@sreetips hello my friend. Thankyou for the series. Quick question for you. I was down to my brown mud I then dried it out. Put it in my crucible and started to put heart on it sprinkle a little borax. But it never became a molten puddle and just crystalized? For lack of a better word. Any idea what I did wrong?
Sounds like your flame isn’t getting hot enough.
no idea what you are doing but fun to watch.
Alright a complete video. I can now download all parts for offline watching
I still think a small Mason jar full of sponge gold would be cool... lol
A large mason jar full would be cooler lol 👍
So nice sreetips
❤اصبحت عظوا من متابعين قناتك الراقيه ❤
Thank you and welcome!
Which method is cheaper to get all the materials/chemicals for, SO² or the other where you precipitate with stump out?
Stump out is easy and cheap but the gold will have salts in it. The SO2 gas is a little more time to set up and take down, but the gold is very clean.
Is the karat gold ( 10, 12, 14 etc.) pretty reliable? You base your yield calculations on that correct?
Yes, but there is stuff out there that can deceive. After viewing thousands of pieces of karat gold over the years, I can spot fake stuff just by looking. But every now and then some junk can and will find its way into my melt dish.
I sure hope you see this, I can't think of anyone else that might know the answer. I have an old gold plating kit from the 60's. Or early 70's , the 4oz bottle of plating solution leaked and soaked into about a 8 inch section of the cardboard, would you have any idea how I might be able to salvage it? Would there even be enough in it to be worth bothering with?
I’ve no experience with gold plating solutions. But if it were mine, I’d cut the cardboard with the gold plating solution out, burn it to an ash in a melt dish, place the ash in a clean beaker and try a little Aqua Regia to see if I could detect and gold in the solution.
I've smelled H2S many times but I assume SO2 is more like a burnt match than rotten eggs. I assume they have the same effect in higher concentrations in losing sense of smell. I hope never to find out.
I presume a gold waste recovery series is in order soon based on the amount of gold waste lately. 🤞
Stock pots are due
ممتاز استمر ياصديقي ممكن ترني نوع الصاروخ الذي تذيب به التراب بل بوتقه
لوسمحت صوره
I’m using a fused silica melt dish to melt the gold “dirt”.
I CAN GUARANTEE THAT THE NEXT MELT OF SREETIPS GOLD MELT INCLUDED THAT PIECE OF GOLD SPONGE THAT SLUFFED OFF OF THE MELT DISH WAS INCLUDED IN THE NEXT MELT,,, EQUASIONS ,,,WEIGHTS,,, AND COUNTS ,,,, THAT IS SREETIPS FORTE, PER SAY,,, THATS WHY I WATCH AND LEARN, THANK YOU SREETIPS FOR ANOTHER SUPERIOR WAY, AND WATCH💯💯💯🎯🎯🎯🔥🔥🔥🔥
If you save them up you could make a nice necklace 😉
What are the fumes coming off the gold when you melt it in the dish? Is that lost gold?
No, some compound from gas reaction. It smelled like burning wood.
ممكن سؤال كيف ترسب الذهب ماهي المواد ترسيب أنا عبفشل في الترسيب شكرا الك
We buy scrap gold jewelry at local sales near our city.
Where does all the poison cloud go? Does it get scrubbed somehow in the exhaust hood?
The poison cloud gets exhausted outside away from my work area. You wouldn’t work on your car and in a closed garage with the motor running, would you? The poison cloud from the cars exhaust would concentrate and kill you. And the exhaust from an automobile is far more harmful to the atmosphere than my occasional chemistry experiments.
Hi sreetips, can you put a educational video over recycling of dead celk phone lithium batteries and also document the ROI
Unfortunately I only work with gold and silver. No experience with dead cell phone lithium batteries.
At 8:43 a smoke comes from the melting dish. Could you describe that smell?
It smelled like burning wood.
I wonder if any combustion products from the torch end up in the metal, reducing the purity. Vs melting with electric heat.
None that report in an assay. The gold comes back three nines - every time.
@@sreetips Really impressive that some home chemistry with careful technique yields such a great result!
Looks like you are using a propane torch to preheat the mold and a cutting torch to melt. Is that oxy acetylene or oxy propane?
MAP torch to heat the mold. Oxy/acetylene with a cutting head for the gold melt.
@@sreetips Thank you Sir!
What does wet/dry gold sponge feel like when rubbed between the fingers?
Powder
Ohh molten gold 🪙, lovely stuff, good evenink 😊
did you get that gold that tried to escape out of the dish
I should have noted it in the video. I knew that there would be many comments about that and the other crumbs that escaped.
I wonder how much closer to the estimate was with those two small lost pieces at the end.
Those were tenths only. Not enough to make up ten gram loss. Some of the karat scrap was probably fake. Fake stuff does get by me from time to time.
Three absolutely perfect gold bars - kind of amazing you did them one after the other like that. Another outstanding video and a very cool refining. Again, well done! 👍👍
Did you retrieve the chunk that fell out of your spoon at 5:47?
No, I just let it go. It’s lost and gone forever! I’m being facetious, swept it into a container and will add into my next batch of karat scrap.
seems like you don't have to use as Mutch smb when in gas form
When you’re rinsing the gold sponge at the beginning, is there a purple tint to the rinse water? Is that gold in the water?
Yes - purple is the color of colloidal gold.
@@sreetips maybe that could also account for the missing ten grams, between that and the two chunks that fell out of the dish I mean.