Awesome, I have one question - - Is there any automatic converter available, If solar panel is not produced the power (due to bad weather) then battery should charge automatically from government electricity. if yes, please recommend the product and share the video for connections, I need to avoid manual work (i've normal inventor only)... Thanks for knowledge sharing...
It’s very good n very helpful, but you are just missing isolators for ac , arrays n battery isolators. Would you make another video including isolators please. I would say this the simplest n best video on you tube to understand solar panel system connections.
I really like your video and there are almost no people addressing this issue. I have some problems. Your AC switchboard does not look like anything I've seen here in the US. Also, the back of your inverter is very different than what I've seen. I do think I can figure out how to do your steps even though these things are different, but I'm not sure what to ask for if I want an "AC switchboard" in the US. Thank you for your very understandable instructions!
Is there any plug to automatically convert to AC power supply when less battery when less sunlight but then automatically use solar battery when enough sunlight or.. for solar priorities first?
mean in night hours we must connect direct ac supply through inverter to further charge the battery and utilise all other appliance connected to the inverter load. there must be some breaker between charge controller and the inverter which blocks supply back to the charge controller, means cut off the charging supply from it. who will disconnect that breaker, there must be a person deputed to break the supply from solar or charge controller everyday before evening and make it on after morning time daily.
Question The Electrical Guy, a very excellent video here. My Question is: In my open farmland, I've a 3600w SOLAR PANELS ARRAY, a 3500w SOLAR INVERTER and an AC SUBMERSIBLE WATER PUMP of 1,700w(1.7kw) energy rated capacity. My country is on the Equator. Very good sunshine. I want to do a connection as follows: From solar panels to the solar inverter to the AC Submersible water pump. Simple!. Note: I don't need to store energy. The sun must shine tomorrow here 😁🤪. So I don't need battery. Is my connection going to be O.K ? Do I need any SOLAR Charge Controller? Is there risk to the Inverter?
You have given wrong information. You should correct it. You said when it is night and there is no sun then the devices connected to the output Load of the controller will turn off. This is not correct. Then the controller takes power from the battery and keeps the devices running as before.
There no such thing as an electric bulb. The correct terminology is an "electric Lamp". This was established by both Thomas Edison and Joseph Swan. Who both invented the electric lamp at the same time, as established by a Court over patent rights. Neither called it a bulb, which is slang term for a lamp from the automobile industry. It not a term used in the electrical profession.
Nice 1 👍
Nice presentation keep it up
Awesome, I have one question - - Is there any automatic converter available, If solar panel is not produced the power (due to bad weather) then battery should charge automatically from government electricity. if yes, please recommend the product and share the video for connections, I need to avoid manual work (i've normal inventor only)... Thanks for knowledge sharing...
Same question
I recommend a hybrid system to mitigate such issues.
Same question here too, bcz when the power goes off it won't automatically switch to inverter in this case
Yes there is,
Luminous Inverter NXG+ 1600.
Very very useful... Thank you... 👍👍👍
Thanks for the lecture
Thank you always man. Starting solar job soon and this is helping me understand so much. May your God bless you
Very very clear explanation,.i❤it . watch from PNG
Nice lecture
Good bon travail
Thanks you so much for sharing your skills and knowledge
You really delivered with this video 🙌🏾
I love this installation
Nice explanation 👍
Good explanation
Thank you!
It’s very good n very helpful, but you are just missing isolators for ac , arrays n battery isolators. Would you make another video including isolators please. I would say this the simplest n best video on you tube to understand solar panel system connections.
Great love explanation
Thank you for sharing your knowledge GBU
Good explanation what is the voltage for the inverter and the cost price of a good inverter for long duration
Superb
Nice one
So so gud
Nice one ❤
I really like your video and there are almost no people addressing this issue. I have some problems. Your AC switchboard does not look like anything I've seen here in the US. Also, the back of your inverter is very different than what I've seen. I do think I can figure out how to do your steps even though these things are different, but I'm not sure what to ask for if I want an "AC switchboard" in the US. Thank you for your very understandable instructions!
Is there any plug to automatically convert to AC power supply when less battery when less sunlight but then automatically use solar battery when enough sunlight or.. for solar priorities first?
good job
Kabwe from Zambia I like this
Well explained.
👏👏👏 Good work
Thanks
Appreciate 👍
Super ur giving good knowledge
So nice
Awesome
Mere bhai agar vedio urdu me banate to bara acha hota qnke har banda aap jesa educated nahi hai❤
can we use mcb instead of connecting to all the switches?
Can I take neutral from main line
Very nice explanation sir ❤❤❤❤
Thanks 👍
❤ what about the current supply such as from the solar panel and the battery current rating, does it matter?
Pls can I use 12volt solar for25inch tv, standing fan and light
How come you only have one wire coming from the inverter plug? Is there no negative or Earth?
Shall we get good benifit on using MPPT charge controller instead of PWM charge controller in current use
I like this
Super
The battery will charge from two sources. This system will damage the battery?
how please explain
Thanks #PowerLearningChannel
Do charge controllers have ratings too?
mean in night hours we must connect direct ac supply through inverter to further charge the battery and utilise all other appliance connected to the inverter load. there must be some breaker between charge controller and the inverter which blocks supply back to the charge controller, means cut off the charging supply from it. who will disconnect that breaker, there must be a person deputed to break the supply from solar or charge controller everyday before evening and make it on after morning time daily.
Good work 👍😊
Thanks 😊
How connect two or more solar panels together
Brother hum ne inverter ki wires controller ke saath kue connect nahi ki battery ke sath kue ki inverter le to dc currunt hi raha hai na.
Question
The Electrical Guy, a very excellent video here. My Question is: In my open farmland, I've a 3600w SOLAR PANELS ARRAY, a 3500w SOLAR INVERTER and an AC SUBMERSIBLE WATER PUMP of 1,700w(1.7kw) energy rated capacity. My country is on the Equator. Very good sunshine. I want to do a connection as follows: From solar panels to the solar inverter to the AC Submersible water pump. Simple!. Note: I don't need to store energy. The sun must shine tomorrow here 😁🤪. So I don't need battery. Is my connection going to be O.K ? Do I need any SOLAR Charge Controller? Is there risk to the Inverter?
You sure need a Charge controller to stable the voltage coming from the solar panels for the output to be normal
@@imevbore Thanks alot
Can one connect the water pump direct from the Charge Controller?
@@peterhanson5130 No Sir. The pump uses AC power. The charge controller gives out DC power. So not compatible
@@AminuIbrahim-e8r Thanks so much.
how about power supply to multiple rooms?
👍
How do I charge the battle with Ac
How many watts bulb can 12 v battery lighted incase if inverter is 1150 volt
need to correct one thing otherwise charge controller will burn, 1st battery will be connect to charge controller, then pv etc.
Is that the battery of the cars?
😊😊😊
Hi sir I need handadstad how to doo calculet voltteg to amps & wrote
The bedst
How would I know my battery is charged
The Charge controller will indicate it and also stop the charging
You have given wrong information. You should correct it. You said when it is night and there is no sun then the devices connected to the output Load of the controller will turn off. This is not correct.
Then the controller takes power from the battery and keeps the devices running as before.
in days can solar charge battery and at same time battery give AC current can that is possible?
Hindi ma batha data
Bhai Urdu
There no such thing as an electric bulb. The correct terminology is an "electric Lamp". This was established by both Thomas Edison and Joseph Swan. Who both invented the electric lamp at the same time, as established by a Court over patent rights. Neither called it a bulb, which is slang term for a lamp from the automobile industry. It not a term used in the electrical profession.
Thanks !
Superb
Sir, can I use DC,MCB and SPD instead of solar controller.
Bhai Urdu
Superb
Bhai Urdu
Bhai Urdu