🎦 V#22 Wltoys 144001 New Brushless Motor ... 117 km/h Top Speed
Вставка
- Опубліковано 17 вер 2024
- Please click SUBSCRIBE : bit.ly/2VM8DFi and help this channel grow _ Thanks ! 👍
*** This video shows some upgrades to my Wltyos 144001: new brushless motor 7700 KV , cap pack, transmitter & receiver, etc...
*** The new top speed with this setup is 117 km/h (72.7 mph).
You can get this rc car and UPGRADES from these links:
1) WLTOYS 144001 RC Buggy :
www.banggood.c...
New 1/12 version 124019 ( 46 mm longer):
www.banggood.c...
2) ESC (Electronic speed Controller) 120 Amp :
www.banggood.c...
3) Brushless Motor :
bit.ly/3mi31dQ
4) SkyRC GPS Speedometer:
www.banggood.c...
5) Recommended Transmitters :
a) Flysky FS-GT3C : www.banggood.c...
b) Flysky FS-GT5 : www.banggood.c...
c) Flysky FS-NB4 : www.banggood.c...
6) Receivers :
a) For Flysky FS-GT3C : www.banggood.c...
b) For Flysky FS-GT5 with Gyro : www.banggood.c...
c) For Flysky FS-NB4 with Gyro : www.banggood.c...
7) Lipo Battery (3S-1300 mAh) : amzn.to/36fmVRt
*** Smart Lipo Battery Tester-Balancer :
www.banggood.c...
*** IMAX B6 Lipo Balanced Charger:
www.banggood.c...
**************************************************************************************************
#wltoys144001 #castlemotor #hobbywing #wltoys #rcmodwerks #fastrccars #thebrick #brickforspeed #rcupgrades #rcmods #brushlessmotor
We would like to know how many viewers own the same rc car 144001 or planning to get one ... please hit "LIKE" and share your "COMMENTS" ... Thanks 👌
I got 1. Thanks for inspiring us😎
@@DewaPoyo Nice ! hope you will enjoy it 👍
I’ve 2 144001’s and the 2nd one I only got a couple of weeks ago. I’m going brushless with it and have already changed to foams on it and larger bearings they stop the wheel wobble. The motor, servo and esc are in the post and I’m working on the body atm, I’ve gone for the Phat atak body watching all your videos and other people’s is a great help for tips. Keep em coming 😎👍
@@Andym1159 That´s nice! Hope you finish your build soon. Thanks for your support to this channel.
Ordered a 144010
Well that doesn't sound like the crunching and grinding of the 206 evolution at all. Your looks unique on the outside and inside well... you obviously know what your up to in there! That thinv is blazing fast.Thanks alot for sharing.
Appreciate that
WoW… 👌👍
Excellent project…perfectly done in all aspects, in my opinion. 😎😉
Having the gyro stabilizing the steering…absolutely right decision…! 👍
Same about the foam tyres…they do not balloon in unpredictable manner and they are less rotating mass…👍
Your wing modification…
All around…✌
Keep on having a good RC time and stay well…!
Best regards from Germany,
Thorsten 🌞
Thanks! 👍
@@RcModwerks23 You are welcome…👌
This is a monster... like a real car, u can see the true power under the shell
Yes, this rc car is really powerful ... was able to hit 159 km/h on another video
Probably the best example yet and the least talking their shit up very cool🥷🏼
Thanks ! 👍 Please watch also my latest videos of this rc car, which is now much faster (almost 100 mph) on 3s lipo .
Looks it can like more power 🔥
Thanks, yes I´m hoping to hit more speed on future runs
Nice build mate, subbed your channel 👍🍻 cheers for sharing
Awesome, thank you!
The speed 🧐 sound good!
True ! thanks for watching 👍
Very fast and great looking too.. fantastic job dude
Thanks a lot! Yesterday I was able hit 122 kph on 2S, will upload the videos soon
@@RcModwerks23 wow, I think you may have taken the 2s world record there! Amazing. Cant wait to see it.
@@RcModwerks23 oh yea.. subbed!!!
There's no where to buy (link shop)?
If you specify which part you want to upgrade then I can give a link ...
Link for motor : bit.ly/38Ak3Ov
Link for ESC : bit.ly/3f6Zagk
Simply amazing 😉. What I sound. Great man as usual 🥳🥳🥳
Thanks again!
Hello. Hope your are fine. Finally for my Lc racing a bought a TrackStar 380 4400kv and this motor as specified can run with 3S.
@@MA-bq8yg Good! hope you will be satisfied with it 👍
is that stock pinion? very fast... yes i have seen these do 100 mph pretty crazy for such a small machine... i also think for guys that want to make this car or the other slighty longer one as fast on the street straights as possible... they need to get it low to ground ,good foam tires and a power system like this... and gyro helps control big time... insane speeds are fun to watch...great job!
Thanks, yes still using stock pinion .. check the latest video of this rc car which got close to 100 mph using a 3s lipo 🚀
@@RcModwerks23 yes thats like a full size doing 1400 mph...insane....years ago i had a 1/10 buggy i added brushless to and it hit around 50 and it was insane to deal with..
@@roadstar499 It was bit scary to drive it at almost 100 mph 😆
Nice setup!!!
Thanks!
I am interested with the servo perfomance, very responsive. Please tell me the servo you are used
I used this servo: bit.ly/2WF2Tei .Thanks for watching
@@RcModwerks23 Does it have the same size as the original servo? So it can be plug & play instaled
Awesome 👍👍👍
Thanks 🤗
Wow... That's fast
Thanks for watching
Just got one yesterday!!
Nice! Hope you enjoy it!
@@RcModwerks23 Thanks! Hope so !!!! Yours is crazy fast! Very cool looking also!! I've got a different body for mine already also. And the LC Racing wing coming soon!! Definitely like the truggy body on yours ! Will have 2 get one of those as well. Have a blessed day!!!
@@johnsneen424 Thanks ! Did you watch the latest video of this same rc car? It hits 159 km/h, one of my fastest rc cars 🚀.
@@RcModwerks23 not yet, but definitely will after work today!!
@@johnsneen424 I have two 144001 rc cars, and you can see my 144001 videos here : ua-cam.com/play/PLYJNRW9ZhxV96dIiE0NgF2GT04Trz93rx.html
Nice car 👌 Did you also upgrade the gears?
Not yet, I still have the stock ggears
Nice videos, do you have a link for the body shell and the rear and front spoiler?
Thanks
Thanks for watching ! Please check this link : bit.ly/3pC4flG
did you change gears at all? very cool street racer now
No, still using the stock spur & pinion gear. Thanks for watching ! 👍
@@RcModwerks23 did you take apart and add grease? does any grease work //i also have 90 weight gear oil i wonder if it would work well or leak...i do not have this car yet ,but its on my list...thanks
@@roadstar499 yes, i added a lithiium grease on the diff but not sure if 90w gear oil will be fine
Great speed runs , never tried foam 👍🏻
You should!
Foams add 6mph to a stock brushed 144001 b4 you go brushless if that’s the way your going? And are brilliant for speed runs search “Schumacher contact foams” product number J13773 Foam; 1/10 front 26mm 37sh JAP Carbon And J13774 foam ; 1/10 Rear 30mm 37sh JAP Carbon. Hope you try them? For the front and rear it cones to about £14-15 off E-Bay 👍
Very nice wot brand motor and esc are you using?
Castle motor & Hobbywing ESC
Can you give us a list of the parts you used please?
That would be a very long list, sorry I cannot provide it now. Most of the important parts that I changed are already mentioned in the video
Do you mind telling me where you found the foam tires for the car because I've been searching everywhere for some phone tires for mycar
Please check this link: www.amainhobbies.com/search?s=foam+tires
Keren👍😍
Thanks for watching ! 👍
great, how you fix the wheel dance? i need know how to make.
Just make sure that wheel nuts are perfectly tightened, not too loose nor not to tight 👍
I’m building one atm and have the foams on and used bigger bearings 7x4x2.5mm I got the tip off @MeHim rc channel there great n a big shout to him 👍 they totally stop the wheel wobble. I’ve greased my diffs done all the camber and toe-ings and have such a smooth roll so far....is it preference on the motor? I’m going brushless but will not reach your immense speeds and a great build by the way 😎 as👍. I need to know the metal spur gear size I need to buy for the drive shaft could you tell me pls?? As I don’t think the stock plastic one will last with a more powerful motor, regards Andy 🙏
This rc car still runs with the stock plastic spur gear until now, plastic spur can last as long as you drive it smoothly. If you want to upgrade to metal spur & pinion , it is 44T/27T please check this link : bit.ly/30q7RN8 . Thanks for watching 👍
@@RcModwerks23 thanks for the tip 👍I’m gonna leave it I reckon? I thought I could get away with it as long I’m not going reverse n forward every pull of the trigger it seems quite a good spur for the car? I’ve just took my new one out for it’s 1st taste of tarmac, I’ve found a good 3-400metre rd of it on the estate where I live and it’s a cul de sac 😎🙏 so down to the roundabout and back💪 again, it’s great. I’ve only changed the wheels to foams, greased the diffs, sorted the toe-Ing and rear wheels sticking in by turning the swingarm holders round and installed bigger bearings 7x4x2.5mm and they stop the wheel wobble a big shout out to @MeHim Rc for the tip 🙏 and it runs so smooth and quiet just on brushed!! And it’s still fast 💨 so it’s a decision on the brushless motor and esc now? Any ideas pls? I know the servo I need n I’ve a 4 channel Carson reflex wheel n receiver for it. So any ideas on the motor pls? I’d be grateful of 🙏 I think a 60 amp esc will do I’m just not sure on the motor?? I don’t want a coke can in there just something nice n small with reliability 👍🙏
@@Andym1159 60 amp ESC is good .. and a 3650 size brushless motor is a direct swap to the stock 540 brushed motor, get approx 4000 KV motor and you will be good to run it on 2s or 3s ... check my other videos where i made a comparison of the 3650 brushless motors with different KVs ... but if you want a lighter build you can also use a 2838 size brushless motor
@@RcModwerks23 thankyou I thought the 3650 would be right I was struggling with the kv and size 🙏
@@RcModwerks23 thankyou I was looking at a 2838 motor as there smaller but then you’ve gotta change the gearing and get the pitch right etc.....I’ve a 144001 that I bought when they 1st came out I put too much metal on it and everytime I took it out something broke!! I’ve learnt from my mistakes and can use this as a donor car now for my new build. The cars are so cheap that you just buy another and you can get a good brushless motor and esc for £25 and the servo for £8 so your coming in at less than £100 pound for a 4x4 wheel drive very fast car. If your into the hobby you will have a receiver n transmitter you swap about so it’s just one investment there as you can put your receiver in whichever car your running that day. Thanks for the tips much appreciated 🙏 and keep up the good vids 🙏😎
Mantep tenan yo
Thanks for watching! 👍
Maybe you need a longer distance for speeding up?😮
Freeman Wu yes, i think the same... bur it is hard to find a longer road here without traffic
Have you a link for the wing ?
bit.ly/2Yga25v
Where'd ya get that sick body from?
It was from LC racing Truggy
For what is the cap pack on the speed runs
just to help a bit the ESC with ripple voltage
I say that, because I have the quicrun, but this ESC have only 2 cap, and I don't know If I have to buy a pack with more capacitors
@@fx9188 not necessarily because I saw many speed runners not adding cap packs
Can you post links to the motor and esc? I HAVE TO DO THIS !
Here is the link for the motor: bit.ly/2X2BfXF
Here is the link for the ESC: bit.ly/3fWBR9J
Pls link for tires
Please check this link: bit.ly/3qjoAgP
good 7k views!...
Thanks
Where do i get That Bodystyle.. ???
It was from LC Racing 1/14 Truggy
whats the size of foam tires?
These are 1/10 scale foam tires around 62 mm diameter ... a bit smaller than the stock tires
@@RcModwerks23 i saw one in aliexpress , im planning to get one
Pinoy RC Driver Stay away from chinese foam tires, earlier I bought one set but they are very bad quality... better get branded foam tires like Contact, Yokomo, Enetti, etc...
If there is an rc shop close to you, ask them if they have 1/10 foam tires... lately I got a good purchse from my local rc shop for 8 euros per set ... so I bought 6 sets
What is a cap pack?
These are the capacitors that we add to protect the ESC frpom roipple current
what shocks are those
This car has stock shocks
Pasang Go pro brow
Thanks 👍
Can that 7700kv moter take 4s
I am not sure, but personally i will never do it ... Actually that 7700kv motor was only rated for 2S only ... but I ran it on 3S (at my own risk) since it was few seconds only
Where did you get that body ?
I bought it from here: bit.ly/2yJc4Rw
RC ModWerks i cant read it 😂
@@JerseyStyle7 sorry, the site was spanish ... but you can check this from Aliexpress: bit.ly/3fs434d
RC ModWerks ty👍👍👍
Please have you a link for this motor ? Thanks
You can get the stock version of this rc car RTR (Ready To Run) from below link 👇 :
www.banggood.com/custlink/mmGhtBBgAI
Please check also the Description for the links of UPGRADES 👍
Gear ? Plis
27T pinion & 42T spur gear
thank you 💪💪💪💪💪👍👍
@@RcModwerks23 spur gear 42t is the wltoys a959 ?
@@kukomelaza8237 that is the stock spur gear of 144001 which is similar to A959-B & A979-B ...the A959 I think has 38T since my A949 also has 38T
@@RcModwerks23 the best channel 💪💪💪💪😃
Nice build but I’ve gone 71 mph on 2 s in my 104002 check it out on H and w rc racing channel
Thanks, and this 1/14 scale rc buggy has gone 81 mph using a small 2s lipo on my later videos .. but the top speed is was 99 mph on 3s lipo 🙂
I have watched your video and that was a good speed for 2s lipo on 104002 if you were using stock gearing 👍
I also have a 1/10 scale 104001 and it was able to hit 90 mph on 3s with STOCK spur gears 🙂 ... hope to improve that soon after some upgrades
@@RcModwerks23 yes I’ve gone 86 mph on 3 with stock gears but that the limiting factor I’m converting to mod1 spool and pinion also a mamba esc I’m running over 10000 kv and had an esc fire lol I got that idea for my kv from your 9000 kv motor in your vid thank you for what you do bud you check out my runs on H and w rc racing channel
Awesome video & car. Check out my twin motor 144001 on my channel.
Thanks, will do.