I had a Brother Scan N Cut and sold it because I didn't know how to use. I found it so hard to figure out their design program. You made it seem much easier. Thank you for all the time you take to help your viewers.
I have had and used a Scanncut for a number of years. It really is just one step to transfer the file to the machine. I am not sure what you were doing there in the beginning. Glad you are showing the machine though. I love mine also.
I have a SNC and when you transfer your design over to your machine you don't scan it, it's already there. All you do is click on the icon with a cloud and the machine (located on the top left of screen) and it will load onto the mat. Very simple. Also, the new SNC is so quiet you can hardly hear it, plus it has the auto blade so you don't have to fiddle with your blade. I really love my SNC. Love the shirt!!!! You are aweosme.
Thanks so much for using the Scan n Cut machine for one of your videos!!!! You did add a couple steps you didn’t need to add when you went to the machine. It automatically transfers to the machine and you retrieve from the cloud icon. It is one step only. You can do a scan of the file with vinyl on to see if you have your design on the vinyl which is wonderful if you are using a scrap piece of vinyl! The new Scan n Cut machines are whisper quiet and have an automatic blade. Again, thanks for doing a video of the Scan and Cut. I have been using my 2 Scan n Cuts 650W and the new SDX125 machines for over 2 years and I did learn a few things from your video!
I have a scan n cut. Love it. I use inkscape software to create everything then upload into canvas. Send to machine through wifi. Just make sure from inkscape you save as plain svg to maintain design size.
I have a scan n cut. Dont scan first what you need to do push pattern instead at the top you see the machine. Press that and it will transfer the file to the machine. If you want to see the vinyl you can do the above and then scan in the background.
The other scraps that you have left over from weeding are really good for die cutting and used as little embellishments such as stars, hearts, and even letters.
Such a pretty pink good job! Hope your hubby is doing ok with his eyes. I had cataract surgery a few years ago and was so happy to be able to see again and get rid of my glasses.
Glad you're doing this with the Scan N Cut. I have one, it's not wifi so I use a usb drive, and it's really not complicated at all. My issue with the Scan N Cut is the pressure and blade depth. I understand the newer ones have the automatic blade similar to the Cricut and the ability to send wirelessly. That said I like my Cricut better but I'm not getting rid of my Scan N Cut either! Love your videos, look forward to every one of them.
Hi Betsy, great to see you trying out the Scan n Cut. You did make things a little more complicated than they needed to be, but hey! We all started somewhere! Great job x
I have a ScanNCut and I love it, great to see you giving it a go, I have learned so much from you so please feel free to email me if you want to know anything about the machine x
No, there not extra steps. actually she made a mistake. She was supposed of press the pattern button first, then the cloud button and that was it. But she hit on the scan button instead. Plus she did admit but she still learning how to use the brother scan and cut machine.
I'd love for you to offer multi cutting machines with the same pattern ideas on Patreon site. I LOVE that you use Cricut but..... everyone should have a bit of your Awesomeness! Lol
I am not sure which model you are using. I have a ScanNCut and can send files to the machine without loading material. Then I load my material and cut. Don't need to scan it before cutting unless you want to move design on screen to make sure you are on a certain place on material.
I'm a little confused... Maybe because I'm watching on my phone and can't see what was on the little SNC screen... But why did you send it again to the machine? I'd that normal to send it twice? Or would you typically load vinyl, then send the file to cut? Thanks, Betsy!! I've had a SNC sitting on the shelf for a year cuz I don't know how to use it!
Cuttin Corners Vinyl You only need to send it once and material or mat do not have to be loaded. You did a fantastic job considering you are just learning this machine. I learned a few things from you on canvas and I have been using my Scan n Cut for over 2 years! Would love to see more videos from you using the Scan n Cut! Thanks for venturing out!
I have a question about the t shirt guide. I bought the9 x 9 because I have the 9 x 9 easy press and mat. The tshirt guide does not go to the end of the mat so how do I know where the center is on the t shirt if the guide does not fit the entire easy press mat. I dont have a heat press so I bought the t shirt guide to use on the easy press. Do I need a bigger tshirt guide?
Darlene Venus if your mat is (ie) 9.5 inches wide you would center your shirt on mat as normal. When you place your T-shirt on mat close to top of shirt you should center guide on mat leaving a quarter inch on each side. Hope this helps.
I had a Brother Scan N Cut and sold it because I didn't know how to use. I found it so hard to figure out their design program. You made it seem much easier. Thank you for all the time you take to help your viewers.
Love that you are embracing all cutting machines. I have the Scan & Cut and love it! And I love the shirt! Thanks, Betsy, for your inspiration!
Love that you are embracing all cutting machines. thank you.
I have had and used a Scanncut for a number of years. It really is just one step to transfer the file to the machine. I am not sure what you were doing there in the beginning. Glad you are showing the machine though. I love mine also.
I have a SNC and when you transfer your design over to your machine you don't scan it, it's already there. All you do is click on the icon with a cloud and the machine (located on the top left of screen) and it will load onto the mat. Very simple. Also, the new SNC is so quiet you can hardly hear it, plus it has the auto blade so you don't have to fiddle with your blade. I really love my SNC. Love the shirt!!!! You are aweosme.
thank you for your video. i agree this machine is so much harder than the other machines. you explained it so well. thank you again
Thanks so much for using the Scan n Cut machine for one of your videos!!!!
You did add a couple steps you didn’t need to add when you went to the machine. It automatically transfers to the machine and you retrieve from the cloud icon. It is one step only. You can do a scan of the file with vinyl on to see if you have your design on the vinyl which is wonderful if you are using a scrap piece of vinyl! The new Scan n Cut machines are whisper quiet and have an automatic blade. Again, thanks for doing a video of the Scan and Cut. I have been using my 2 Scan n Cuts 650W and the new SDX125 machines for over 2 years and I did learn a few things from your video!
I have a scan n cut. Love it. I use inkscape software to create everything then upload into canvas. Send to machine through wifi. Just make sure from inkscape you save as plain svg to maintain design size.
I have a scan n cut. Dont scan first what you need to do push pattern instead at the top you see the machine. Press that and it will transfer the file to the machine. If you want to see the vinyl you can do the above and then scan in the background.
You have taught me SO much!! I have the Scan and Cut and I didn’t know what weld was for. Now I know why my projects with letters came out messed up.
The other scraps that you have left over from weeding are really good for die cutting and used as little embellishments such as stars, hearts, and even letters.
That's what I do with my scraps😊
Yes. Use to throw them away before it dawned on me 🙄
midd lush That's right, it cost to much to throw good scraps away, and I like to get all monies worth. 😊
I Just got a scan & cut for Christmas , after watching this I think I’m ready to try it out. Thanks for the tutorial..
Such a pretty pink good job! Hope your hubby is doing ok with his eyes. I had cataract surgery a few years ago and was so happy to be able to see again and get rid of my glasses.
Glad you're doing this with the Scan N Cut. I have one, it's not wifi so I use a usb drive, and it's really not complicated at all. My issue with the Scan N Cut is the pressure and blade depth. I understand the newer ones have the automatic blade similar to the Cricut and the ability to send wirelessly. That said I like my Cricut better but I'm not getting rid of my Scan N Cut either! Love your videos, look forward to every one of them.
Have an older Scan-n-Cut but love the Cricut i got in November. Have done more with it then I have done with the Scan-n-Cut.
I have one and never have been able to get all the steps down. I have the Circut Maker and love that machine!
I LOVE YOUR HAIR CUT! IT LOOKS GREAT ON YOU! OH, and thank you for your great tutorial!
Hi Betsy, great to see you trying out the Scan n Cut. You did make things a little more complicated than they needed to be, but hey! We all started somewhere! Great job x
I love my Scan N Cut, but I don't have any of the other machines. The New Scan N Cut is very quiet... Love your lesson, thank you. Great shirt
Yeah! A scan n cut tutorial. I love my SnC!
My favorite eyemakup on this vide . Very pretty
Thank you. I have the scan n cut and I'm still learning. Love your new hair style.
Super cute! I actually enjoyed watching you work with the Brother. Better ideas of what it can do than I had before. Thanks!
I love seeing how each machine operates! Thank you!
Thanks so much for the scan n cut tutorial! Hope you do more!
It's interesting to see the different machines and programs in action. Thank you for doing this!
Thank you. I have a Brother Scan & Cut that I've never used. It's a big learning curve for me. LOL!!!
Thank you for the great video. So happy you are doing videos on the scan and cut
Love my scan 'n cut. Use it all the time. Just got a Cricutmaker too.
I have a ScanNCut and I love it, great to see you giving it a go, I have learned so much from you so please feel free to email me if you want to know anything about the machine x
So glad to see your video with the scan n cut since I own one
Please do more with the Brother Scan n Cut videos I can't get my Canvas workspace to work on my computer
Beautiful- have never used a brother scan
Nice shirt. Yes it is a few more steps, love cricut machines. I still believe silhouette is louder though. Tfs
No, there not extra steps. actually she made a mistake. She was supposed of press the pattern button first, then the cloud button and that was it. But she hit on the scan button instead. Plus she did admit but she still learning how to use the brother scan and cut machine.
Ooo Betsy I love your shirt. I need one for V day!!!
I love your videos. Thank you so much for providing so much information.
I have the Brother Scan n Cut SDX125 and it is VERY quiet. One of the things I love about it.
Love the shirt! Where can I buy them?
Hi thanks for the video. do you wash your shirts before you put HTV on them? thanks
I never thought to use my brother scan and cut !
Omg i love that shirt!!
I love it!! Betsy, any makeup tutorials coming? I really enjoy those tutorials as well.
I'd love for you to offer multi cutting machines with the same pattern ideas on Patreon site. I LOVE that you use Cricut but..... everyone should have a bit of your Awesomeness! Lol
Great tutorial as usual!
Hi Betsy
I only need to transfer my design 1 time from the internet to the scan n cut machine
Love your videos. This video was very helpful! Thanks!
I definitely think the Cricut is my favorite machine.
Thank you for doing a V-Neck! 😊
How did you select the word yall and authentic together to align them im new to this. Thank you
You do do things the hard way Betsy, i only use a scan n cut and you confused me lol. Jacqui
Hello, where did you get your great fonts from?
Thanks for all the great tips, I love c your videos n lear a lot
Love this,where did you buy the shirt please💜
Love that shirt. So need to make me one like this!!
Are the time and heat settings for Cricut heat press same as your hotronix..?
How do you get it to stick so well? Mine has horrible tack.
The latest scan n cut is very quiet and has an automatic adjusting blade.
What else can you use instead of a teflon sheet or where can you get teflon sheet
love the shirt
Love the shirt/ saying.
i love the shirt.
Love your videos
I am not sure which model you are using. I have a ScanNCut and can send files to the machine without loading material. Then I load my material and cut. Don't need to scan it before cutting unless you want to move design on screen to make sure you are on a certain place on material.
Love that glitter shirt!! Do you carry them? Such a cute saying!!
I'm a little confused... Maybe because I'm watching on my phone and can't see what was on the little SNC screen... But why did you send it again to the machine? I'd that normal to send it twice? Or would you typically load vinyl, then send the file to cut? Thanks, Betsy!! I've had a SNC sitting on the shelf for a year cuz I don't know how to use it!
You have to send it afttthe material is loaded
Cuttin Corners Vinyl You only need to send it once and material or mat do not have to be loaded. You did a fantastic job considering you are just learning this machine. I learned a few things from you on canvas and I have been using my Scan n Cut for over 2 years! Would love to see more videos from you using the Scan n Cut! Thanks for venturing out!
What is the difference between cut and print and cut
Tfs! Where can I purchase the t-shirt you used?
Amazon
What kind of vinyl to use for t shirts
I love that shirt. Can I copy your shirt.
I have a question about the t shirt guide. I bought the9 x 9 because I have the 9 x 9 easy press and mat. The tshirt guide does not go to the end of the mat so how do I know where the center is on the t shirt if the guide does not fit the entire easy press mat. I dont have a heat press so I bought the t shirt guide to use on the easy press. Do I need a bigger tshirt guide?
Darlene Venus if your mat is (ie) 9.5 inches wide you would center your shirt on mat as normal. When you place your T-shirt on mat close to top of shirt you should center guide on mat leaving a quarter inch on each side. Hope this helps.
Too dang cute
Betsy all you have to do is hit the retrieve data button once and your pattern will appear on the screen.
I still don’t know how to use my Cricut 2 yet,much less attempt buy any other machine. I’m about ready to chunk this one out to the road. Lol
I love that 💖
If you have the new dx225 Machine there is not that many steps and it is very quiet Machine I have each Machine and there is good points to each one
If time, temp and pressure are correct isn't pressing once enough?
I always repress just to make sure. It’s a habit.
@@CuttinCornersVinyl Thanks.
Like what you are doing, but you should have done a test cut first. This to make sure you didn’t cut through the clear sheet or your mat.
❣️
I like the shirt. The silhouette is much easier. Less steps.
Just think the apostophy should be a little closer down to the a of y'all.
It takes that long because the NSA has to approve it before it's beeing sent to the printer.
I put everything to a usb, not all will work with it. I got a list.
my brother machine just sits till I stamp images....
No thanks! The brother cut and scan is to much work! Nice shirt though!
I don't like that machine at all
Love your videos