I REPAIRED THIS MASSIVE DENT WITHOUT PAINTING | Paintless Dent Removal
Вставка
- Опубліковано 19 тра 2024
- Paintless Dent Removal Step by Step on a BMW 330d rear quarter panel
Thank you for choosing to watch my latest in a 3 part series!
This is Part 2 and I show you all the steps I took to repair this large damage on a rear side panel without the need to use body filler or even repaint the car!!
⚠️Part 1 was out a few weeks ago and if you missed it then here is a link to the video, go check it out!
▶️ • HOW TO FIX This BIG De...
📣Part 3 will be out in a few weeks time where I show both sides being repaired in MORE DETAIL and go more into the tools that's needed to fix extreme damage like this.
I hope you can take away some information from this if your a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
------ Chapters------
00:00 Intro
00:42 First look at the damage
01:34 Remove fuel housing
02:17 Cold Glue
03:25 Planning the repair
05:02 Start the repair
06:02 Hot glue pull the arch
07:38 Tension release
08:38 More tension
09:42 Hot glue with collision tools
14:25 Repair fuel surround with pliers
16:21 Hot glue pull fuel surround
17:11 Fuel pipe disconnect
17:49 Got Wood
18:26 Glue pull the dog leg
19:01 Finish arch
19:41 Finesse with flat bar
20:58 Tap down the rear crown
21:25 C pillar
22:36 Straighten fuel door
24:23 Thanks for watching
24:53 Before and afters
24:39 End screen
💚WE NOW HAVE MEMBERSHIPS!
Join this channel to get access to perks:
/ @dentremover01
💥TOOL DISCOUNTS
We love using the Gangrene tabs from Black Plague PDR, The crease tabs are the toughest on the market that ive tried so far, especially the 38mm crease tabs!! Use "Dent-Remover" in the discount section at check out!
get yours by clicking this link and also spend over $100 for free shipping
😊www.blackplaguepdr.com/discou...
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
Martin Sadler
#paintlessdentremoval #youtube #collisionrepair #dent - Авто та транспорт
You are amazing, I’ve learned a lot fr😅m you, now I’m the top pdr tech at work because of your techniques.
Wow that’s amazing!! Well done I hope to see you on UA-cam or at a dent show and if you do please let me know and ill buy you a beer if we meet 🙌🏼
A true master at his craft. I've been a PDR tech since 2000 and I've learned so much from Martin. Thank you Sir.
Wow, thanks for your great comment! 2000 that’s 24 years well done!!!
The master at work! What a satisfying transformation! 👏👏👏
Hey Jake! Thanks as always!
You can't fail to be impressed by this 👏
Amazing comment thank you so much I’m glad you enjoyed it
Amazing work Martin. Thank you for sharing your techniques with us. I have too have learned a lot from you..😊
You are very welcome and that’s amazing you’ve been able to pick up ideas/tips to help you with your repairs
Excellent work , i have mine booked in next weekend. 😊
Great results, great repair.
Thank You Martin for this video.
I am learning a lot and getting more and more satisfaction when doing pdr
Thanks.
Amazing! Thank you so much for your great comment Karolalbin I’m very happy I help you 🙌🏼
hello from Glendale ca good job .
Hello thank you for watching! I hope you enjoyed the repair ?
i realy did thanks .
CLEAN JOB !!!
Thank you
Fantastic job!
Thanks Allen I hope the info on the repair helps people and techs
Amazing guy with insane skills
Thank you so much
1:19 I’d expected to see you come out at the front of the car. 😂
Great work!
Thanks Robert!
Great repair and explanation 👌🏻
Hi. Great job and excellent result!!!
Great job!
Great job ❤
Great Repair well done
Impressed with the job particularly around that nasty crease at the lower front corner of the fuel flap opening, right on the swageline, a real Ba****d to fix. Anyway, you smashed it. Impressive. You make me proud.
Thank you very much 🙌🏼
Very nice 👏👏
Thank you
Wow amazing job,like how you knock the crowns down,so precise also the edge pliers are a absolute great tool. Loving that. Great job 👏 👍
Thanks Andi it takes practice but it’s highly effective
Fantastic repair as usual 👏👏
Thanks Andy!
Top Notch Job 👍👍
Thank you Corey!
Great job mate
Thanks Graham!
Adrian Newey can see air flowing over cars
Martin can see tension in panels. 😁
That's true!
True expert, in my country Lithuania there are only shitty repairers that want 300eur for smaller repair, when new panel cost is 50eur
Thank you kindly. Sorry to hear you can’t find a good PDR repairer. Have you tried Google search for a 5⭐️ company?
this is my daughter and son in laws car so i saw this before and thought there was no way you would get that out as it was a lot worse than how the camera shows it, but i was gob smacked when i went and checked it out after you did it i can find even the slightest mark
Thank you so much for your great feedback! It didn’t look too good when I saw it in person I really had my doubts about the drivers side BUT- it came out amazingly well! Ade said you wanted to see it so I’m very happy it has your approval!
Part 3 will be out soon and it’s just over 1 hour long, a lot more detail and more indepth so if you have a free hour and want to see the “unglazed over” version I hope you enjoy it and please leave your feedback!
Have a great Easter to you and family
Martin
Saya sangat suka dengan vidio bapak penjelasan yang sangat baik,sangat membantu saya
Thank you so much. I hope I have your language in the CC (subtitle)
Please let me know if not and I’ll try to add it for you
Thanks Martin
Hello, I’m watching your videos and I just can’t figure out what kind of adapter is on the lamp
Hi. If you mean the black part which attaches to the stand it’s called a “Medusa adapter” and if you google or search this on a PDR shop it should come up straight away
@@dentremover01 Thank you
hi, if it's not a secret, tell me what tripod you use for the Meduza adapter
How long did it take to finish this؟
Hi, this 1/4 panel took me a full day to fix
@@dentremover01 It took a few hours to complete?
How many hours did this one take you mate?
This took all day! 9-9 I think
Мастер
Thank you kindly