Best Brands:- If you have an enough money, try:- *1. Amsoil* *2. Addinol* *3. Liquimoly* Budget best:- *1. Motul* *2. Valvoline* (Best viscosity i got, Personal Fav)* *3. ENEOS (Japanese oil)* *4. Shell* *5. Total* (Increased the Raw Power with Original exhaust, but Decreased in Mileage 1 or 2km* I never recommend *Castrol* , reason castrol have N number of Detergent Agents are there, which will damage the Crank ball bearings inside of the engine, Studied in Various Research Articles. *Also Motorex oil have low viscosity, this oil recommended for Track & Off road bikes, which will tear the Piston & leads to white smoke from exhaust* Also Motul 300V model also have same. ❌
@@rajeshkanth Hello, brother. I'm using an Apache RTR 150 2V (2015 model). Since I bought it, I've been using TVS brand oil for many years. I believe its viscosity is 20w50. I have never switched to any other brand since I bought the bike. However, I feel that the engine heats up, especially after riding about 5 to 7 km in traffic. I travel around 60 km daily. I planned to switch to Motul 3100 Gold 20w50, but in our country, it's really difficult to find, and it's quite costly too. As per your comments, you suggested avoiding Castrol, so I'm planning to switch to Valvoline 20w50. Will this oil protect the engine, reduce engine heat, and provide good mileage? (I am careful about tire pressure, servicing on time, driving style, adjusting the chain weekly, etc.). Will Valvoline 20w50 offer me more benefits compared to the TVS oil? Please let me know. Thanks in advance.
*Always use recommended grade* If ur bike has 10w30 means, u can use 10w40... But Don't use *Higher grades* (20w40/20w50) for ur engine.. Because its not suitable for ur engine type & Oil will not Flow into ur Bike crank case because of that Density in the Higher grades Oil .. *Higher grades are mostly used in cars,Tractors,Motors,Generators etc..* because of that Operating temperatures of the products... *Engine flush:- Don't use under 50K Km driven bike... Reason it will damage the Ball Bearings & Oil seals in the Crank side of thd engine* 🚫 But flush can use above 50K km driven vehicles.. It will clean out the sludges..
If the water does not mix, the oil can be shaken well and used liberally. Only the specified amount of oil should be used in the engine. Thank you very much for your questions.💚
Waste Esson have Low viscosity & average density oil... If u are using Scooty/under 125cc, I'll suggest & try:- *Valvoline 10w30 champ* Don't use *Castrol* reason i said in this video comment..pls see this video comments you can find the reason❗
Best Brands:-
If you have an enough money, try:-
*1. Amsoil*
*2. Addinol*
*3. Liquimoly*
Budget best:-
*1. Motul*
*2. Valvoline* (Best viscosity i got, Personal Fav)*
*3. ENEOS (Japanese oil)*
*4. Shell*
*5. Total* (Increased the Raw Power with Original exhaust, but Decreased in Mileage 1 or 2km*
I never recommend *Castrol* , reason castrol have N number of Detergent Agents are there, which will damage the Crank ball bearings inside of the engine, Studied in Various Research Articles.
*Also Motorex oil have low viscosity, this oil recommended for Track & Off road bikes, which will tear the Piston & leads to white smoke from exhaust*
Also Motul 300V model also have same. ❌
Thanks for you're comment
@@rajeshkanth Bro i just now changed to castrol full synthetic ippo etha issue aguma
@@kalaikrishnab8974 no issues.. better use motul
@@kalaikrishnab8974 for which bike?
@@rajeshkanth Hello, brother. I'm using an Apache RTR 150 2V (2015 model). Since I bought it, I've been using TVS brand oil for many years. I believe its viscosity is 20w50. I have never switched to any other brand since I bought the bike. However, I feel that the engine heats up, especially after riding about 5 to 7 km in traffic. I travel around 60 km daily. I planned to switch to Motul 3100 Gold 20w50, but in our country, it's really difficult to find, and it's quite costly too. As per your comments, you suggested avoiding Castrol, so I'm planning to switch to Valvoline 20w50. Will this oil protect the engine, reduce engine heat, and provide good mileage? (I am careful about tire pressure, servicing on time, driving style, adjusting the chain weekly, etc.). Will Valvoline 20w50 offer me more benefits compared to the TVS oil? Please let me know.
Thanks in advance.
*Always use recommended grade*
If ur bike has 10w30 means, u can use 10w40...
But Don't use *Higher grades* (20w40/20w50) for ur engine.. Because its not suitable for ur engine type & Oil will not Flow into ur Bike crank case because of that Density in the Higher grades Oil ..
*Higher grades are mostly used in cars,Tractors,Motors,Generators etc..* because of that Operating temperatures of the products...
*Engine flush:- Don't use under 50K Km driven bike... Reason it will damage the Ball Bearings & Oil seals in the Crank side of thd engine* 🚫
But flush can use above 50K km driven vehicles.. It will clean out the sludges..
Bro, kammi cc bikes high to top speeds la drive pannuravangalukku eppdi patta oil use pannalam? 10w30 overheat aavudhu.
@@kirthivasank2649heat aguthuna 30+la poganum example 10w40 or 10w50 poganum avoid mineral. Use semi synthetic
Honda unicorn bs6 bike 20:40 oil use pannalama sir
Honda dio ku enna oil bro best ?
In commuter segment bikes, which engine oil brand is best in high quality? Ex: Shell, Castrol, Motul, Savsol, Veedol, Mak, Servo, HP, Gulf, idemitsu, Valvoline, Apar eni, arkos, poweroil, balmerol, Bosch, Elf, Elvi Bardahl, eneos, Goodyear, mobil, Petronas, polylube, TotalEnergies, zoomol, turbo protech, amaron, OEM Genuine Engine Oils?
Great point!
Anna apache RTR 160 2V ku yenna brand oil use panlam
Shop owner contact panunga full details koduparu
Apo unaku onnune தெரியாது
Can I use Esson 10w30 API SN in my scooty Pep plus bought before 5 years?
If the water does not mix, the oil can be shaken well and used liberally. Only the specified amount of oil should be used in the engine. Thank you very much for your questions.💚
@@__chezhiyan__6681 The answer i am expecting is yes or no y type. You are blabbering without connecting to my question
Chezhiyan shop owner than ungaluku rly panni irukaru more details avara number description la iruku call panni pesunga
Thank you shop owner
Waste Esson have Low viscosity & average density oil...
If u are using Scooty/under 125cc,
I'll suggest & try:- *Valvoline 10w30 champ*
Don't use *Castrol* reason i said in this video comment..pls see this video comments you can find the reason❗
hero Pleasure oil solluga anna
Bro pulser 150 ku entha oil grade use pananum
bro shop owner contact panunga
Hero honda CD 100 KU ena oil use panalam
You can use 10W-40 and 20W-40 viscosity grade but API grade should be at-least SJ or higher
10w 30
Anna honda dio eanna oil choos pannanum
pls shop owner contact contact panunga
Starting speech is unwanted speech..
Saringa appo korachikalam inime thanks for you're comments 🤝👍
Motul engine oil fans assemble here
Ada namma Area
Thanks
points of clips
thanks