I made one out of paper that i then covered in plasti dip back in 2010 when me and a mate made a 4'*8' cnc router from scratch. It actually worked like a treat!
When making replacement bellows for old cameras, a stiffer material is glued everywhere that doesn't bend. The stiffener can be anything, frequently thin cardboard is used. This forces the fabric to bend where you want and nowhere else. In most cases, there is an outer layer of leather or some sturdy fabric (your rubberised fabric would be ideal), then the trapezoid shaped stiffeners get glued on with space between then for the fold, then usually a much lighter fabric glued on the inside. Leave more room at the fold than you really need when creating the gaps in the stiffener material. The inside fabric can be very thin, the thinner it is, the less it interferes with folding, you want this just thick enough to hold down the stiffeners so they can't come loose over time. With all the layers glued, the fabric doesn't fight you during the fold, and you don't need to sew the folds.
Hey! I got a minilathe recently and this is video is super useful. I hope you've been well and I'm glad to see you're still making videos. Keep your stick on the ice.
I made one of these years ago for my last little lathe. I did it on the cheap though. I found some iron on denim repair patches, cut that stuff into trapezium sections, and ironed them on the back of some thin denim I cut from an old pair of cheap black jeans. The iron on material stiffened up the ribs just enough that it folded up neatly. The only real mistake I made was treating it with dubbing wax BEFORE deciding to try and iron the pleats in a bit sharper. That stuff stank to high heaven when it got hot. :D With the extra thickness of the backing material it didn't concertina down to a particularly compact size (Going from about 2' foot fully extended, down to about 4 or 4.5" when closed up...... Depending on how clean it was. :D), but as that lathe had a thicker than standard chuck on it, this wasn't a big issue. It looked pretty good on there too. It was a vintage lathe, and the bellow had a kind of "Well used" look from day one that kind of fitted with the whole style. it stayed on there all the time I had it, and was still in place when I eventually sold the lathe. Making that did make me think that it should be possible to make a mask for the "seams", then spray something through the mask to impregnate the cloth and stiffen up the trapezium sections to make it hold it's shape when folded. Maybe I'll have a play with that idea if I decide to make another one day?
Thanks for this, I am rebuilding a Chinese CNC machine. I need to make 2 of these 40 inches long 6.5 inches tall with a fold of 5/8 ", only mine wont have any 90 degree corners because it will lay in a track all around. I was like the other guy, I was looking at prices and WOW. Thanks
The problem I have had with bellows from that type of material is that if you do any hard turning the chips melt through as though the material was butter.
🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
It's much easier to get the sides bent right way around if you fold them over to backside of sheet before folding the zigzag. The bends will then already be inverted on the side flaps.
It is just a vynal coated cotton or blended fabric. There are other types like a plastic coated fabric as well. I picked that stuff up at a fabric store.
*misreads instructions, ends up with crane* one source of good fabric... shade cloth manufacturers. especially dining structure type umbrellas... wish i had thought of these when i worked at one, could have nice HF welded seams and ends, followed by a quick blast to set all the creases... lol, all i did was throw to rolled edges on a sheet with some siding extrusion to hold it on the machine... and of course, i bought new protectors just a week ago. this video came too late. they always have offcuts in the bin. its freaking expensive to buy off a roll. stuff like "teflon coated algae resistant" surfaces.
Thank you. You showed me how to break those edges, that was what I was missing.
I made one out of paper that i then covered in plasti dip back in 2010 when me and a mate made a 4'*8' cnc router from scratch. It actually worked like a treat!
That is a great idea.
Excellent! I have been looking to do this on my machine. I cannot wait to tell my wife that I have sewing project for her🙂
When making replacement bellows for old cameras, a stiffer material is glued everywhere that doesn't bend. The stiffener can be anything, frequently thin cardboard is used. This forces the fabric to bend where you want and nowhere else. In most cases, there is an outer layer of leather or some sturdy fabric (your rubberised fabric would be ideal), then the trapezoid shaped stiffeners get glued on with space between then for the fold, then usually a much lighter fabric glued on the inside. Leave more room at the fold than you really need when creating the gaps in the stiffener material. The inside fabric can be very thin, the thinner it is, the less it interferes with folding, you want this just thick enough to hold down the stiffeners so they can't come loose over time. With all the layers glued, the fabric doesn't fight you during the fold, and you don't need to sew the folds.
Great video ...an old sewing machine is a worthy member of any workshop.
I bought a stringless mini blind and made mine. It has worked great for two years now.
I found a template for folding this on the internet about 12 years ago. It works.
Wow, this is amazing!
I’ll be sure to cover my Colchester soon!
On the mills I just used rubber matting!
Greg
Hey! I got a minilathe recently and this is video is super useful. I hope you've been well and I'm glad to see you're still making videos. Keep your stick on the ice.
Oh awesome. Im okay :)
I made one of these years ago for my last little lathe. I did it on the cheap though.
I found some iron on denim repair patches, cut that stuff into trapezium sections, and ironed them on the back of some thin denim I cut from an old pair of cheap black jeans. The iron on material stiffened up the ribs just enough that it folded up neatly. The only real mistake I made was treating it with dubbing wax BEFORE deciding to try and iron the pleats in a bit sharper. That stuff stank to high heaven when it got hot. :D
With the extra thickness of the backing material it didn't concertina down to a particularly compact size (Going from about 2' foot fully extended, down to about 4 or 4.5" when closed up...... Depending on how clean it was. :D), but as that lathe had a thicker than standard chuck on it, this wasn't a big issue. It looked pretty good on there too. It was a vintage lathe, and the bellow had a kind of "Well used" look from day one that kind of fitted with the whole style. it stayed on there all the time I had it, and was still in place when I eventually sold the lathe.
Making that did make me think that it should be possible to make a mask for the "seams", then spray something through the mask to impregnate the cloth and stiffen up the trapezium sections to make it hold it's shape when folded. Maybe I'll have a play with that idea if I decide to make another one day?
That sounded like it was a great one. Ive seen ones with steel backers as well. Mine still need work. Thank you!
Old school camera users could benefit from this as well!
Absolutely. I have seen a few pjoton on instagram lately with camera bellows. Very cool.
The Origami Master at work, excellently done.
Thank you very much for the skills you share.
Thank you!
Very interesting video. Thankyou for sharing.
Thank you.
Thank you for this video. It`s exactly what I´ve been looking for
Thank you. Good luck with your project!
Thanks for this, I am rebuilding a Chinese CNC machine. I need to make 2 of these 40 inches long 6.5 inches tall with a fold of 5/8 ", only mine wont have any 90 degree corners because it will lay in a track all around. I was like the other guy, I was looking at prices and WOW. Thanks
The material choice can matter. Also it doesn't have to be folded. It can be sewn together which may be even easier. Thank you for watching!
Great video and topic. Some of my old machines need new Bellows, will follow your tips.
I would love to help any way I can.
Awesome video - thanks for posting!
Thank you!
Great video - thank you for the info 👍
I like the origami approach the most and I think that bottle plastic or might work, and i would also consider 3d printing framework.
So far the one on the grinder is doing well. A frame would certainly help. Great idea. Thank you!
Does anyone have a link to where to get that material. Would be highly appreciated
Hi!
thank you for the video.
i wanted to know if i can use a stapler instead of a sewing machine.
I dont see why you couldn't. The ribs or the sewing areas are just for added support.
The problem I have had with bellows from that type of material is that if you do any hard turning the chips melt through as though the material was butter.
Just what i need
Thank you for sharing
Fantastic. Thank you!
Great work
This is something I need to do on my mill
🔴 What Is Islam? ⚠️
🔴 Islam is not just another religion.
🔵 It is the same message preached by Moses, Jesus and Abraham.
🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God.
🔵 It reminds us that since God created us, no one should be worshipped except God alone.
🔴 It also teaches that God is nothing like a human being or like anything that we can imagine.
🌍 The concept of God is summarized in the Quran as:
📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚
🔴 Becoming a Muslim is not turning your back to Jesus.
🔵 Rather it’s going back to the original teachings of Jesus and obeying him.
It's much easier to get the sides bent right way around if you fold them over to backside of sheet before folding the zigzag. The bends will then already be inverted on the side flaps.
That is a good idea, thank you.
I bet half us that watched this saw the price of bellows for a bridgeport and said F that nonsense!
Yeah. The off the shelf ones get up there in price.
@@AlmostMachining Stupid money!
Very helpful, thanks!
Very useful
Thank you!
thank you
That was Great, Thanks
Thank you for watching. I have a new one coming soon using a different material.
What is this fabric called or what is it used for? I’ve never seen it. Very cool!
It is just a vynal coated cotton or blended fabric. There are other types like a plastic coated fabric as well. I picked that stuff up at a fabric store.
What is the name of this material?
where can i find
It was just vinal covered cloth. Amazon should have some i think.
that material you use? my way cover broken and want to repair
Faux leather, or a vynal, or a plastic coated fabric would work. Just shop and get samples and see how they flex.
Thanks
this is sooo usefulllllll thaanks
nice work
Thank you!
Nice 👍
Thank you!
*misreads instructions, ends up with crane*
one source of good fabric... shade cloth manufacturers. especially dining structure type umbrellas...
wish i had thought of these when i worked at one, could have nice HF welded seams and ends, followed by a quick blast to set all the creases... lol, all i did was throw to rolled edges on a sheet with some siding extrusion to hold it on the machine... and of course, i bought new protectors just a week ago. this video came too late.
they always have offcuts in the bin. its freaking expensive to buy off a roll. stuff like "teflon coated algae resistant" surfaces.
Scared of explaining knowledge 😅