LONG TERM UPDATE A year after posting vid, still loving the Sherco 250SE and 300SE with no issues to report after making this vid. FURTHER POSSIBLE ISSUES This vid has already come out on Facebook. A few guys mentioned the rear brake cylinder rubbed against the swing arm and started to leave marks. Apparently it's an easy fix, just bend the bracket a little. If buying a new Sherco, keep an eye out for this. Didn't happen to ours. CLUTCH PLATES The occasional hit-and-miss quality of Adler clutch plates... you can replace with aftermarket plates from Prox or Rekluse. A cheap option apparently is 1996 Honda XR600 plates but make sure you buy the right number to get the correct width when all the plates are put together. Also, the clutch basket can be drilled to increase oil flow to the plates. A Sherco race team has done this with good results. We have a vid about this free mod. ua-cam.com/video/bR3tH3JNXp4/v-deo.html SOFTER CLUTCH? Softer springs were mentioned in the vid. And also removing two springs since there are six in place. I've done the latter for two years with zero issues. However, there can be some clutch slip at full throttle in higher gears, but I never ride like that lol. If you rarely hit the powerband it's worth looking at. See this vid: ua-cam.com/video/41DyblFBfr8/v-deo.html JETTING: in the vast majority of cases, the carbs are jetted way too rich, especially following recent Sherco manual recommendations from 2018 and on. Most dealers will fix this before selling. My dealer did, but it was still too rich and occasionally foul plugs. If you can get hold of a 2017 Sherco manual, the factory recommendations were quite accurate back then. My personal experience? I bought the N8RG needle from Sherco and used the second highest clip. The bike no longer fouls plugs, splutters, or dribbles spooge... woohoo! This is working great at sea level to 400 metres and temperatures from 20 to 30C. WEAK CHAIN GUIDE f you ride a lot of gnarly terrain you may find your chain derails if the guide is knocked around and you may want to fit a stronger aftermarket one. It's not just Sherco, Beta is well known for the same issue. Only KTM seems to provide a sturdy chain guide from the factory. Does it happen often? It depends on how you ride. We spend a lot of time in gnarly tracks but try to 'think' our way instead of bash through. I've had two chains derail in 18 months. OVER 100 FREE ENDURO TRAINING VIDS English not your first language? Subtitles in 30+ languages! Basic enduro skills playlist bit.ly/3BtOVyI Intermediate enduro skills playlist bit.ly/3HSkh4r Advanced enduro skills playlist bit.ly/3oNNeqF BIKE SETUP & RIDING GEAR Bike setup playlist: bit.ly/3sBar0i Protective gear playlist: bit.ly/34BYDTI Which bike should I buy? bit.ly/3gLTJG1 Knee protection playlist bit.ly/36fR4Cw OUR OTHER PLAYLISTS Reviews of bikes & products bit.ly/3GQCVrO All about helmets bit.ly/3sJxIgy Enduro philosophy! bit.ly/33meQeV 10 ways to hop logs bit.ly/3JqlOPx The weird side of enduro! bit.ly/3Js1ai2 Read our disclaimer first before attempting any techniques: bit.ly/2U0bgCy Become a supporter! www.crosstrainingenduro.com/cross-training-support-donations.html
80hrs on 2022 model. Love it. Replaced spark plug at 60hrs. Just because it said so in manual. I ride with smartcarb sc2 . No jetting and fuel leaks. What a machine !!!
I just got my 300 SE Factory 2022 and I'm loving it, much better in all aspects when compared to my old 300 EXC 2020. Sherco has been growing a lot in recent years and are manufacturing incredible motorcycles. Hugs from Brazil 🤘
I just said this same thing today. Ever since our last hard enduro race, I can't seem to get on the trails. Sometimes, life happens. Love the bike though!
Good review Barry. I agree with everything you said. In addition I've had to replace the starter on mine, I've also replaced the thermo fan and had the valving done. Both were expensive items and I was a little disappointed that they needed replacing but over all I've extremely happy with the bike.
I bought my sherco se300 factory this summer with 2hours and now it has ~16 hours on it. I replaced all 6 clutch springs with ktm ones and this makes a big difference with the pulling force. No problem with this mod at all. Since I am 1,91m tall I just ordered carapaks foot pegs which are 1cm lower and 1cm more backwards. I wanted to try this instead of using bar risers. I confirm the way to rich jetting (and still the recommendation in the manual is too rich). Only problem with the bike up so far: My speedometer is not water proof and failed after first bike cleaning. Got replacement by the dealer. I pull a plastic bag over it now when cleaning the bike. And I have to say the wheel bearings and the deflection bearings were in my opinion greased not enough. Read about that and checked luckily early enough. I do not regret the swap to the french bike, love the torque of the engine and the electric power valve is awesome. Regards from Germany!
@@y0imbooster since carapaks could not deliver -10/-10 I bought them from parts by sweden. I am feeling more compfortable in the body position standing and sitting.
I'm on my 3rd Sherco 2stk('18 125, '19 250 factory, now '21 250 factory). I've never had a single issue with any of them. My friend jetted them all, I bought them from him. We always do a fairly heavy oil mix ratio to what the book or what most people do. 32:1. But they were all jetted for that and they are as crisp as can be and no silencer dribbles.
As usual, nice review! On the jetting topic, I have found that the "recommended" jetting is always too rich. I bought a jetting kit from a well know aftermarket company and the jetting in the chart was still too rich. I called and talked to he owner because I thought I should be going leaner but wanted to get his opinion before doing it. He said, yeah, the jetting he shows is a bit rich but only because of liability concerns. He told me the jetting I thought I should use would be fine. Bottom line is to jet for your preferences regardless of the recommendations. Of course that's assuming you know how to jet the carb!!
Greetings from Canada! Timely video. New Sherco dealer opened an hour away (as opposed to 5+hours). Rode a 300 around his parking lot for a while yesterday. It's down to a Beta 300RR or the Sherco. Hmmmmm.
All spot on from what I’ve experienced. I did loose my fan at 100 hours. A Spal fan and four KTM fan screws make for a reliable, plug in upgrade, just cut the stock fan off the bracket and drill four holes. My clutch howled, but it never broke a plate. I replaced drive and friction with the Rekluse replacement pack $214 US dollars, better engagement and the slight drag is gone, especially for those like me that keep three fingers on the bar. N8RW or NECW needles up here @ 7-10k feet. Otherwise it just goes and goes, love it.
Loved the review and love my 22 300 factory, but agree the clutch is too heavy. Does anyone know or have investigated if the clutch springs from the (Sherco) trials bikes would fit ? As generally they are an easier pull .
When I rode both the Sherco 250 and 300 at a demo day last year I thought the 250 suspension was MUCH plusher than the 300. Not sure if the valving is different or something with the setup on those two bikes specifically. Interestingly enough I like the Beta and Sherco 250s more than the 300s. I ride a GasGas 300 TPI right now and the power delivery on those 250s feels very similar to me. The 300s feel like they have too much power and (as you said) break traction a bit easier.
@@crosstrainingenduroDo you guys find the 250 lacking in any super steep technical terrain? It seemed plenty powerful to me, but the demo loop we could ride them on didn't have any serious elevation to tackle.
We ride that sort of stuff fairly often. No problem for the 250. It's probably got the most grunt in its class (probably due to the electronic power valve) and actually feels the closest to a 300...
I’ve got a 17 ser300 6-day and love it The engine is awesome although you can get a bit of buzz thru the bars. The WP suspension works well in most conditions. As you’ve mentioned the bars are a bit low but haven’t got risers as yet. Trying to ride in a more attack position. The fuel tap won’t get broken!! And I always turn off when trailering and drain bowl after riding seems to make starting incident free. Location of battery is a dog under the air filter but you can easily jump from the solinoid. Mapping switch actually makes a big difference compared to my mates TE300 which is not much of a change. The quick release seat fastener is awesome easy on, easy off. All in all a very pappy camper
Great to hear. I remember riding a 2015 model and the mapping switch made a huge difference. The 2022 model? I can't even pick the difference at lower revs.
Love the vids. My 21 300se has been absolutely amazing with 80hrs so far. I got the suspension softened up in the Mid and it’s pretty good now. Just wondering what u guys ended up with for jetting on your 300se. Cheers from Squamish BC. 🍻
So I have a love hate relationship with my 2022 se 300 factory. The first season on the bike i absolutley loved it, i ride woods and alot of track. This season....has been stressful. For some reason the electrical in the bike has failed.bike was parked at the end of season( i live in alberta canada) when spring came the bike would not start. Long story short, my bike has been in the shop for 4 months and the issue has not been resolved.new ecu, new coil and new harness. It will start but surges to the point you cant even put in gear. Season has been ruined and thousands spent on a already exspensive bike. Not sure i would ever buy one again, but again when its runs it is very nice. I do feel this was a quality issue during covid and i drew the short straw as my riding buddies have no issies and are pushing 250hrs. Sucks to suck
That sucks! Sherco was having a lot of issues with their electrics (mainly ECU, coils, rectifiers etc) in early models, we reported on this in a Sherco known issues vid. But it did appear they had fixed them in recent years. I wonder whether it's worth approaching the Sherco distributor in Canada and arguing the case under consumer law. E.g. the bike wasn't fit for purpose? And if you don't get a satisfactory answer tell them you'll be detailing your story on social media as much as possible?
Out of curiosity what bike are you buying next? I’m a very experienced rider. I’ve been on the 300 SEFR and love that bike now looking for my next one. Any recommendations?
@@crosstrainingenduro I gathered that from your other video just now. I really appreciate you getting back with me. I’ve loved my 300 4 stroke and I’m really just debating now between the 250 2 stroke or the 300 4 stroke. I really wish you could ride the bikes before buying them but that doesn’t seem to be an option.
FYI As of yesterday I have decided to go with a 2023 Sherco 300 sef-r factory. I loved the last one so much and can’t imagine not having one. Thanks for the great content.
@CrossTrainingEnduro To be honest, I did not understand what is the cheapest and best solution for the problem with the clutch. Can you explain and give a simple link to the product itself, so that I can purchase?
@@crosstrainingenduro Ok thanks. And what is the best option? I looked at rekluse but I think it's too expensive. Is there a solution that you think is somewhere between removing 2 springs and the rekluse clutch that might be better?
Good review, intresting to learn about the new 300/250 2 smokers, I'll be in the market for one down the track if I decide to get into tighter more technical riding, but for now I'm happy with the legendary drz 400e for adv and mighty klx 450r for enduro a combo that works really well for me and Japanese quality 🙏
2023 300 SE JD RED needle clip 3 38 pj/165 mj Adjust air screw from 0-5500’ runs crips and clean with air screw adjustment. 50:1 legend ZXSR and 100 octane gt260 Sunoco. No decel surge or poofs. Cleanest running two stroke I’ve ran in 30 years. 13/51 gearing Midwest clutch leaver 23’ model had a 09 piston in clutch smoother then KTM or BETA! Killer bike so far, love the power more then my 22’ BETA race editions, they are gone and the Sherco is here to stay for awhile.
Hi, after 100 hours the frame cracked above cylinder head mount. 1 month after warranty period. If someone do a lot of jumps, mx or cc trainings, I suggest to inspect the frame. My case isn't the only one. 300SE factory MY2022.
Bummer. Is this in the USA? I'd still aim for a warranty claim as most countries have laws protecting consumers beyond warranty periods if a product is not seen as 'fit for purchase'.
Hi I've got the 2022 se 300. Just changed the clutch plates at 85hrs. The clucth squealed under load. I was using the 3 ktm springs to soften the pull. Found the last friction plate was broken. Gone back to stock springs and rekluse plates. My ktm springs are shorter the stock just like your photo. Is that a issue?
@@crosstrainingenduro I'm definitely considering a Sherco 250 , I can't seem to find a "Wet weight" online anywhere , have you managed to weigh the sherco full of fuel ? My Xtrainer is only 107.5 kg full of fuel , hope the Sherco isn't to much heavier to lift when I drop it
hello, Beta RR 300 or Sherco se factory 300, which is more powerful, more aggressive, more brutal, more reliable, faster in the forest on difficult trails and difficult climbs thanks to the people who will answer me!🤝🏻
Unless you are an incredibly experienced rider (probably with a lot of A grade racing in your past) you'd actually find you'll be slower on an aggressively powerful bike. You'll become much faster by actually working on your riding technique instead of trying to figure out which bike has three more hp.....
Impossible to say, so many variables. Any European brand will be better than 99% of us actual riders. The only serious question is how to become a better rider IMO.
Loving my 23 se300 only have 15hrs on it so far Worst I've had is mistaken to be a Yamaha... Niggle for me as mostly faster enduro work is when a full tank of fuel can have a large effect on steering less 3/4 its apples. Although have installed gold valves and springs suitable to my weight. I feel i could get away with a little more fork spring and that would help I did a jd jetting kit on mine also has helped smaller throttle opening response. Also in a fall doesn't take much to move the bars in the clamps...
When tank is full front can push on initial turn in. I think with the slightly heavier springs will help hold front end up with initial weight transfer and turn in. I'm referring to the extra weight up high and as not ridden much with a tank larger then 7 litres As coming off mx bikes previously...
Salut , moi j’aime beaucoup la géométrie de la partie cycle, la douceur du moteur , la position de conduite, j’aime moins le levier d embrayage assez dur , le dessin de la selle qui ne me permet pas de serré la moto avec les genoux au bonne endroit, sinon dans l ensemble je trouve la sherco un bonne moto , sherco 300 se factory 2021 , merci
Just up graded from a ktm with lots off endruo mods to 23 factory se 250 have 25 hrs on it now 250 power is great 90% iam in soft map Front forks I haven't touch at all rear shock had to back nearly all the way soft but is now just beading in and have stiffened back up didn't like Handle bar bend have gone to ktm low bend renthol Made standing over front end more neutral position now Axp hard endruo bash gaurd waste off money And tubliss with Michelins you best tyer set up I've ever had
LONG TERM UPDATE A year after posting vid, still loving the Sherco 250SE and 300SE with no issues to report after making this vid.
FURTHER POSSIBLE ISSUES This vid has already come out on Facebook. A few guys mentioned the rear brake cylinder rubbed against the swing arm and started to leave marks. Apparently it's an easy fix, just bend the bracket a little. If buying a new Sherco, keep an eye out for this. Didn't happen to ours.
CLUTCH PLATES The occasional hit-and-miss quality of Adler clutch plates... you can replace with aftermarket plates from Prox or Rekluse. A cheap option apparently is 1996 Honda XR600 plates but make sure you buy the right number to get the correct width when all the plates are put together. Also, the clutch basket can be drilled to increase oil flow to the plates. A Sherco race team has done this with good results. We have a vid about this free mod. ua-cam.com/video/bR3tH3JNXp4/v-deo.html
SOFTER CLUTCH? Softer springs were mentioned in the vid. And also removing two springs since there are six in place. I've done the latter for two years with zero issues. However, there can be some clutch slip at full throttle in higher gears, but I never ride like that lol. If you rarely hit the powerband it's worth looking at. See this vid: ua-cam.com/video/41DyblFBfr8/v-deo.html
JETTING: in the vast majority of cases, the carbs are jetted way too rich, especially following recent Sherco manual recommendations from 2018 and on. Most dealers will fix this before selling. My dealer did, but it was still too rich and occasionally foul plugs. If you can get hold of a 2017 Sherco manual, the factory recommendations were quite accurate back then. My personal experience? I bought the N8RG needle from Sherco and used the second highest clip. The bike no longer fouls plugs, splutters, or dribbles spooge... woohoo! This is working great at sea level to 400 metres and temperatures from 20 to 30C.
WEAK CHAIN GUIDE f you ride a lot of gnarly terrain you may find your chain derails if the guide is knocked around and you may want to fit a stronger aftermarket one. It's not just Sherco, Beta is well known for the same issue. Only KTM seems to provide a sturdy chain guide from the factory. Does it happen often? It depends on how you ride. We spend a lot of time in gnarly tracks but try to 'think' our way instead of bash through. I've had two chains derail in 18 months.
OVER 100 FREE ENDURO TRAINING VIDS
English not your first language? Subtitles in 30+ languages!
Basic enduro skills playlist bit.ly/3BtOVyI
Intermediate enduro skills playlist bit.ly/3HSkh4r
Advanced enduro skills playlist bit.ly/3oNNeqF
BIKE SETUP & RIDING GEAR
Bike setup playlist: bit.ly/3sBar0i
Protective gear playlist: bit.ly/34BYDTI
Which bike should I buy? bit.ly/3gLTJG1
Knee protection playlist bit.ly/36fR4Cw
OUR OTHER PLAYLISTS
Reviews of bikes & products bit.ly/3GQCVrO
All about helmets bit.ly/3sJxIgy
Enduro philosophy! bit.ly/33meQeV
10 ways to hop logs bit.ly/3JqlOPx
The weird side of enduro! bit.ly/3Js1ai2
Read our disclaimer first before attempting any techniques: bit.ly/2U0bgCy
Become a supporter! www.crosstrainingenduro.com/cross-training-support-donations.html
Thanks
80hrs on 2022 model. Love it. Replaced spark plug at 60hrs. Just because it said so in manual. I ride with smartcarb sc2 . No jetting and fuel leaks. What a machine !!!
What was wrong with the stock carb that you needed to replace it?
@@chadrides914 Nothing. Just did not want to mess with jetting. Jetting is Stone Age I guess . No fuel leaks when bike is tipped over . Fuel economy .
Guess some people just have more money than sense 🤷♂️
@@chadrides914 well where I am from sherco 300 2t is 3 000 eur cheaper then erzberg ktm . So yeah money makes sense buddy ;)
Holy crap, that downhill section definitely destroyed the theory of how a picture doesn't reflect how steep a hill is! Well done buddy!
I just got my 300 SE Factory 2022 and I'm loving it, much better in all aspects when compared to my old 300 EXC 2020. Sherco has been growing a lot in recent years and are manufacturing incredible motorcycles. Hugs from Brazil 🤘
Just awaiting delivery of my new 300SE factory in Portugal !
I’m sure you’ll love it! Enjoy your blue machine bro 👊🏻
My known issue on my Sherco 300 factory is I DONT RIDE IT ENOUGH ! 😁
I just said this same thing today. Ever since our last hard enduro race, I can't seem to get on the trails. Sometimes, life happens. Love the bike though!
I'm having the same problem with my beta... not a brand related issue then 😂
Do you want to sell it
@@matthewevans2175 Do you live on Kauai?
@@matthewevans2175 hell no and I'm in Sydney Australia
Good review Barry. I agree with everything you said. In addition I've had to replace the starter on mine, I've also replaced the thermo fan and had the valving done. Both were expensive items and I was a little disappointed that they needed replacing but over all I've extremely happy with the bike.
I bought my sherco se300 factory this summer with 2hours and now it has ~16 hours on it. I replaced all 6 clutch springs with ktm ones and this makes a big difference with the pulling force. No problem with this mod at all.
Since I am 1,91m tall I just ordered carapaks foot pegs which are 1cm lower and 1cm more backwards. I wanted to try this instead of using bar risers.
I confirm the way to rich jetting (and still the recommendation in the manual is too rich).
Only problem with the bike up so far:
My speedometer is not water proof and failed after first bike cleaning. Got replacement by the dealer. I pull a plastic bag over it now when cleaning the bike.
And I have to say the wheel bearings and the deflection bearings were in my opinion greased not enough. Read about that and checked luckily early enough.
I do not regret the swap to the french bike, love the torque of the engine and the electric power valve is awesome.
Regards from Germany!
Hello! I wanted to ask you how does it feel to have carapaks lowering pegs? is it worth it?
@@y0imbooster since carapaks could not deliver -10/-10 I bought them from parts by sweden. I am feeling more compfortable in the body position standing and sitting.
@@johannesderkannes7935 Thanks. I will probably upgrade too 😅
Glad i found this...MONSTER incentives in USA right now, with some 22 300 factory left
My 21 250se factory is so awesome, will be getting the same model in 24
Another good honest review, thanks mate!
Cheers Trevor
I'm on my 3rd Sherco 2stk('18 125, '19 250 factory, now '21 250 factory). I've never had a single issue with any of them. My friend jetted them all, I bought them from him. We always do a fairly heavy oil mix ratio to what the book or what most people do. 32:1. But they were all jetted for that and they are as crisp as can be and no silencer dribbles.
How did you like the 125? Any other 125’s to compare it to?
As usual, nice review! On the jetting topic, I have found that the "recommended" jetting is always too rich. I bought a jetting kit from a well know aftermarket company and the jetting in the chart was still too rich. I called and talked to he owner because I thought I should be going leaner but wanted to get his opinion before doing it. He said, yeah, the jetting he shows is a bit rich but only because of liability concerns. He told me the jetting I thought I should use would be fine. Bottom line is to jet for your preferences regardless of the recommendations. Of course that's assuming you know how to jet the carb!!
Thank you for sharing
Good point, Dave. Our local Shero guru runs an aftermarket needle available through Sherco that is leaner than the leanest one in the factory kit.
Greetings from Canada! Timely video. New Sherco dealer opened an hour away (as opposed to 5+hours). Rode a 300 around his parking lot for a while yesterday. It's down to a Beta 300RR or the Sherco. Hmmmmm.
Tough choice, Dave!
All spot on from what I’ve experienced. I did loose my fan at 100 hours. A Spal fan and four KTM fan screws make for a reliable, plug in upgrade, just cut the stock fan off the bracket and drill four holes. My clutch howled, but it never broke a plate. I replaced drive and friction with the Rekluse replacement pack $214 US dollars, better engagement and the slight drag is gone, especially for those like me that keep three fingers on the bar. N8RW or NECW needles up here @ 7-10k feet. Otherwise it just goes and goes, love it.
Good to hear. We have a video next week about clutch mods that can help with extre lube for Sherco clutch plates
Nice ride and review!
Loved the review and love my 22 300 factory, but agree the clutch is too heavy. Does anyone know or have investigated if the clutch springs from the (Sherco) trials bikes would fit ? As generally they are an easier pull .
The fuel tap location is the only thing I hate, mine is a little stiff and can't get my hand at good angles to twist it
Such a bad design! We just put cheap lawnmower fuel taps in. Solved.
When I rode both the Sherco 250 and 300 at a demo day last year I thought the 250 suspension was MUCH plusher than the 300. Not sure if the valving is different or something with the setup on those two bikes specifically. Interestingly enough I like the Beta and Sherco 250s more than the 300s. I ride a GasGas 300 TPI right now and the power delivery on those 250s feels very similar to me. The 300s feel like they have too much power and (as you said) break traction a bit easier.
I suspect there could be a difference, the suspension on my 300SE was too firm for our sort of riding, his 250SE did seem softer.
@@crosstrainingenduroDo you guys find the 250 lacking in any super steep technical terrain? It seemed plenty powerful to me, but the demo loop we could ride them on didn't have any serious elevation to tackle.
We ride that sort of stuff fairly often. No problem for the 250. It's probably got the most grunt in its class (probably due to the electronic power valve) and actually feels the closest to a 300...
I’ve got a 17 ser300 6-day and love it
The engine is awesome although you can get a bit of buzz thru the bars.
The WP suspension works well in most conditions.
As you’ve mentioned the bars are a bit low but haven’t got risers as yet. Trying to ride in a more attack position.
The fuel tap won’t get broken!! And I always turn off when trailering and drain bowl after riding seems to make starting incident free.
Location of battery is a dog under the air filter but you can easily jump from the solinoid.
Mapping switch actually makes a big difference compared to my mates TE300 which is not much of a change.
The quick release seat fastener is awesome easy on, easy off.
All in all a very pappy camper
Great to hear. I remember riding a 2015 model and the mapping switch made a huge difference. The 2022 model? I can't even pick the difference at lower revs.
Love the vids. My 21 300se has been absolutely amazing with 80hrs so far. I got the suspension softened up in the Mid and it’s pretty good now. Just wondering what u guys ended up with for jetting on your 300se. Cheers from Squamish BC. 🍻
As per the vid, Jeff. We tend to use that 2017 jetting chart.
So I have a love hate relationship with my 2022 se 300 factory. The first season on the bike i absolutley loved it, i ride woods and alot of track. This season....has been stressful. For some reason the electrical in the bike has failed.bike was parked at the end of season( i live in alberta canada) when spring came the bike would not start. Long story short, my bike has been in the shop for 4 months and the issue has not been resolved.new ecu, new coil and new harness. It will start but surges to the point you cant even put in gear. Season has been ruined and thousands spent on a already exspensive bike. Not sure i would ever buy one again, but again when its runs it is very nice. I do feel this was a quality issue during covid and i drew the short straw as my riding buddies have no issies and are pushing 250hrs. Sucks to suck
That sucks! Sherco was having a lot of issues with their electrics (mainly ECU, coils, rectifiers etc) in early models, we reported on this in a Sherco known issues vid. But it did appear they had fixed them in recent years. I wonder whether it's worth approaching the Sherco distributor in Canada and arguing the case under consumer law. E.g. the bike wasn't fit for purpose? And if you don't get a satisfactory answer tell them you'll be detailing your story on social media as much as possible?
Hi Barry, have you had to adjust your float height? Not sure what to set it to as it leaks at any angle other than straight lol
No but it's just like all our Betas, not much of angle and it's leaking fuel everywhere!
Your next step with the 300se is to fit the smartcarb sc2,,,, mate it will improve it even more...
Out of curiosity what bike are you buying next? I’m a very experienced rider. I’ve been on the 300 SEFR and love that bike now looking for my next one. Any recommendations?
I'll be on this Sherco for quite a while I think.
@@crosstrainingenduro I gathered that from your other video just now. I really appreciate you getting back with me. I’ve loved my 300 4 stroke and I’m really just debating now between the 250 2 stroke or the 300 4 stroke. I really wish you could ride the bikes before buying them but that doesn’t seem to be an option.
FYI As of yesterday I have decided to go with a 2023 Sherco 300 sef-r factory. I loved the last one so much and can’t imagine not having one. Thanks for the great content.
My goodness Coleman uses the bike potential about 90% more than me
Can u swap out clutch master cylinder like on the ktm to get a softer clutch pull
It's Brembo so from memory I think you'd have the usual 9 and 10mm sizes?
@CrossTrainingEnduro To be honest, I did not understand what is the cheapest and best solution for the problem with the clutch. Can you explain and give a simple link to the product itself, so that I can purchase?
Cheapest solution is remove two clutch springs, there's no product involved. See the vid links during the vid or in the pinned first comment.
@@crosstrainingenduro Ok thanks. And what is the best option? I looked at rekluse but I think it's too expensive. Is there a solution that you think is somewhere between removing 2 springs and the rekluse clutch that might be better?
Good review, intresting to learn about the new 300/250 2 smokers, I'll be in the market for one down the track if I decide to get into tighter more technical riding, but for now I'm happy with the legendary drz 400e for adv and mighty klx 450r for enduro a combo that works really well for me and Japanese quality 🙏
It's a scammer trying to impersonate my channel, Adam. Deleting dozens of their scam comments now.
@@crosstrainingenduro yeah I thought it was suss 🤨
2023 300 SE
JD RED needle clip 3
38 pj/165 mj
Adjust air screw from 0-5500’ runs crips and clean with air screw adjustment.
50:1 legend ZXSR and 100 octane gt260 Sunoco.
No decel surge or poofs.
Cleanest running two stroke I’ve ran in 30 years.
13/51 gearing
Midwest clutch leaver
23’ model had a 09 piston in clutch smoother then KTM or BETA!
Killer bike so far, love the power more then my 22’ BETA race editions, they are gone and the Sherco is here to stay for awhile.
Wich carb settings you youse For 300 se 2023?
As mentioned in this vid, we follow the Sherco jetting chart from 2017. The settings were too rich after that.
NECW or N8RW
Legends👍👍👍🤘🤘🤘
Hi, after 100 hours the frame cracked above cylinder head mount. 1 month after warranty period. If someone do a lot of jumps, mx or cc trainings, I suggest to inspect the frame. My case isn't the only one. 300SE factory MY2022.
Bummer. Is this in the USA? I'd still aim for a warranty claim as most countries have laws protecting consumers beyond warranty periods if a product is not seen as 'fit for purchase'.
Hi I've got the 2022 se 300. Just changed the clutch plates at 85hrs. The clucth squealed under load. I was using the 3 ktm springs to soften the pull. Found the last friction plate was broken. Gone back to stock springs and rekluse plates.
My ktm springs are shorter the stock just like your photo. Is that a issue?
I'm no mechanic, David. So I don't really know. But I google far and wide to see if anyone ever had troubles with this... couldn't find any issues.
@@crosstrainingenduro Yeah cool, cheers mate.
i know the shercos are slightly heavier than some other enduro bikes do you find they feel heavy
Probably only if we have to lift the bike out of a hole. Otherwise we can't really pick the difference.
@@crosstrainingenduro I'm definitely considering a Sherco 250 , I can't seem to find a "Wet weight" online anywhere , have you managed to weigh the sherco full of fuel ? My Xtrainer is only 107.5 kg full of fuel , hope the Sherco isn't to much heavier to lift when I drop it
hello, Beta RR 300 or Sherco se factory 300, which is more powerful, more aggressive, more brutal, more reliable, faster in the forest on difficult trails and difficult climbs thanks to the people who will answer me!🤝🏻
Unless you are an incredibly experienced rider (probably with a lot of A grade racing in your past) you'd actually find you'll be slower on an aggressively powerful bike. You'll become much faster by actually working on your riding technique instead of trying to figure out which bike has three more hp.....
Is sherco better than KTM?
Impossible to say, so many variables. Any European brand will be better than 99% of us actual riders. The only serious question is how to become a better rider IMO.
Main bearing on clutch side failed….anyone else have bearing issues?
Wish we could easily get those in Canuckistan.
I ended up trading in the new DR for DRZ SM. Going to be an easy swap to dirt wheels....etc.
Loving my 23 se300 only have 15hrs on it so far
Worst I've had is mistaken to be a Yamaha...
Niggle for me as mostly faster enduro work is when a full tank of fuel can have a large effect on steering less 3/4 its apples.
Although have installed gold valves and springs suitable to my weight.
I feel i could get away with a little more fork spring and that would help
I did a jd jetting kit on mine also has helped smaller throttle opening response.
Also in a fall doesn't take much to move the bars in the clamps...
What do you mean less than 3/4 it’s apples when concerning the fuel tank?
When tank is full front can push on initial turn in. I think with the slightly heavier springs will help hold front end up with initial weight transfer and turn in.
I'm referring to the extra weight up high and as not ridden much with a tank larger then 7 litres
As coming off mx bikes previously...
Salut , moi j’aime beaucoup la géométrie de la partie cycle, la douceur du moteur , la position de conduite, j’aime moins le levier d embrayage assez dur , le dessin de la selle qui ne me permet pas de serré la moto avec les genoux au bonne endroit, sinon dans l ensemble je trouve la sherco un bonne moto , sherco 300 se factory 2021 , merci
The clutch is still very hard on the 2024 models, malheureusement. 😒
Just up graded from a ktm with lots off endruo mods to 23 factory se 250 have 25 hrs on it now
250 power is great 90% iam in soft map
Front forks I haven't touch at all rear shock had to back nearly all the way soft but is now just beading in and have stiffened back up didn't like Handle bar bend have gone to ktm low bend renthol
Made standing over front end more neutral position now
Axp hard endruo bash gaurd waste off money
And tubliss with Michelins you best tyer set up I've ever had
We reckon the Michelins are brilliant but way too expensive here to consider them as replacements.
Anybody need a kidney? I want one of these 😉😁