How to Install Gripset Waterproofing - Episode 22.
Вставка
- Опубліковано 2 лют 2021
- How to install waterproofing to a bathroom. In this episode of The Dirt Road Home we are installing Gripset waterproofing to all our wet areas in the property. Products used for this installation can be found at -gripset.com/ .
More videos and action coming each week. For more visit - renovationjunkies.com.au/ and follow along socially below -
Follow - RENOVATION JUNKIES - For Ideas and training.
Web - www.renovationjunkies.com.au/
FaceBook - renojunkies/...
Instagram - renovationj...
Twitter - / reno_junkies
Follow OurBuild -
ourbuild?h...
/ 501183953335817
/ ourbuild
Thanks Guys, any questions please leave them in the comments below.
Cheers, James. - Навчання та стиль
Great and helpful video. Thank-you.
Amazing work guys! Top notch products used 😉😉
SB needs to dry off first 😢
Great Video. It would be handy if you could update the description with the details of all products used on this job.
I am newstarter to this industry. Going to do Cert III in Waterproofing. Should I also consider Cert III in Tiling or is there sufficient work available for people with waterproofing skills
Thank you
Your welcome 👍
Gripset are the only company that teaches the right way to waterproof wet areas and how to recess for the run off into puddle flanges. I learnt from my experience of doing my own bathroom the Gripset way. Good work Gripset👍
Very professional company 👌
So are these bathrooms being waterproofed both under and also on top of the screed??
Hi. I was just wondering, upto what height is recommended for walls in WC and Powder room?
What type of primer can use on sand n cement Bedding please
Great programme,the only problem is that you have everything on the floor and cannot see it
Wow!! Is that true that we need for a diffe3rent membrane type for just plastic puddle flanges, please? I`ve never heard this before! All what I know is... we need to use a special primer for plastic surfaces to enhance bonding to w/proof membrane. And, as I see, no every single manufacturer has such special membrane for plastic :)
That was good mate. I haven't had much to do with waterproofing so interesting. Plenty of painting involved might suit me. The young bloke sure put a flood coat of sealer on. Is it a PVC type sealer like bondcrete?
Yes it is. And yes way to much applied. They must be getting an hourly rate and not paying for the product. 🤣 a little over the top but they won't ever have a problem. The butynol tape is not cheap and good system if you can find people to pay for it.
Nicely done, what was in the tube gun when installing the tile door metal strip? (@13.23)
It would be white sikaflex pro (polyurathane caulk) Im pretty sure. aus.sika.com/en/construction/sealants-adhesives/expansion-perimeterjoints/4649.html
No, it's Gripset SB. It's an MS polymer sealant. (Completely different to polyurethane sealant).
When doing my waterproofing qualification - I was taught that no plasterboard setting compound should be used anywhere the waterproofing membrane is to be installed. The reason for this is that the setting compound will re-emulsify and turn to slop when it comes into contact with the primer or membrane - this will stop the primer & waterproof membrane from adhering properly.
In this video, you can clearly see the difference in the set joins on the wall before and after the primer is installed. The topcoat has been broken down by the primer and turned to slop.
Much better to leave all the wet areas with bare plasterboard/villaboard and let your waterproofer seal all the sheet joins, niches, internal/external corners with a flexible sealant.
Yep same here, and I would NEVER use Aquacheck in a shower recess, villaboard all day every day in shower recess, I use the gripset tapes as shown here, they are the best stuff since sliced bread.
@@-PORK-CHOP- Why no aqua check when at the end of the day it'll all be covered in a waterproof membrane?
@@Monsieur405 Because it's an inferior product to use in a shower recess, the fixing methods are different to villaboard, if a small lead does appear the aquacheck will soak up the leak leading to more extensive damage, villaboard is designed to cope with getting wet if a leak appears, I have seen damage to aquacheck by either lazy plumber, or tiler doing damage to membrane that caused expensive repairs, I will stick to villaboard for any of my jobs as it works for the life of the bathroom, only dodgy builders use Aquachek in shower recess and yellow tongue on the floor in bathrooms.
@@-PORK-CHOP- That's actually an old myth, when the product first came out 20+ years ago it had a few issues. The wetstop board by Boarl (which is used here) is actually more water resistant than the villaboard. Check out the previous video in this play list with our plasterboard sheeting where this is demonstrated. BTW I thought the same thing as you until I was shown otherwise.
@@Monsieur405 Agree, both products have there pros and cons but the wetstop board is actually more water resistant than villaboard as demonstrated in the previous video to this one.
Hello
Do you have to achieve a 12mm cove with that product?
I seem to get mixed opinions.
Great work guys
AS3740?
The young fulla doesn’t mind loading up the primer. Bloody hell !!
🤣
I bet you laid the second layer over those dusty foot prints. Edit: yip, ya did.
What is the standard industry way for applying the waterproofing - over or under the screed. You have gone under here but can that lead to permanently wet concrete/screed and a damp smell?
Either way is acceptable. More and more builders are opting for over AND under the screed.
If only doing one though, over the screed is generally considered to be better than under, because the screed/bed doesn't stay damp. But most builders/tilers will do under only because it is faster.
If a tile bed needs to be laid for floor fall is it done before or after this water proofing step?
Waterproof under the tile bed
G'day,
It's 2023 now and I've noticed through watching Australian inspections getting done on UA-cam that they are saying internal corners require a 12mm curve as per Australian standards.
its looking good from far, but far from good
Only 12mm cove where not bandage applied or no bond breaker
I have decided to use this system. Is there a reason for not applying the membrane over the tape around the window?
Gripset say, that particular tape (Butyl tape) is already considered to be an adequate waterproof layer. So no need to go over it again with the liquid membrane.
At 6.25 minutes in butle tape is used on floor wall junction, and thereafter jointband is used. So why was the butle tape used at 6.25 minutes in?
what about bedding!
Can you use the tape over the waterproofing membrane? Not a tradie here Just a DIYer
Yep once its dry 👍
@@OurBuild thanks 😂
If builders have already installed vanities, door jams, arcs etc what do we do then?
Doors and achs would need to be cut at the base at finished tile height, vanity should be removed
@@OurBuild yeah as if
Old video I know but you cant go over plaster.
I've never seen someone use aqua check in the actual shower, strange
0:58 You need knee pads for this job.
agreed 😁
Nice product , maybe some of that tape can keep that young blokes shorts up over his underpants
🤣🤣🤣
No 12 mm transition, non-compliant gotta rip out the whole thing out.
(Joke)
Where’s the water stop angle at doorway and shower recess?
The shower tray slab is recessed 50mm down and a door angle is installed.