Going to be installing tomorrow brought the same kit and wire kit from Amazon and gauge holder from eBay lol..iam full E85 tune so just want this for the ethanol content reading..your video going to make it easy to install
Thats the return líne or the feed line? ,i see someone said on the evo x you have to use the return because you have 2 filter one in the rail and another one in the pump
I’m still debating on going flex but with your video explanation it’s so doable even for me lol thanks man also beside bolt on what else should you upgrade before getting it tune?
Im following your channel and I think you should already be getting a tune with the downpipe, test pipe, exhaust, intake AND an intercooler. I know you have the access port but that’s no good. Get a real tune. You’re just about ready. Fuel pump, bigger injectors, Get the flex fuel kit and you’re set.
For flex fuel tunes you need minimum e85 safe fuel pump, bigger injectors, Grimm speed boost controller and the flex kit. I could loose the Cobb and get protuned on the stock computer which specifically works with the flex kit I did here. Great tuner is #1, if anywhere close to him I’d highly suggest Chris Carbee of Slowpoke tuning.
Where would your out this if you have a upgraded system? I have a walbro 455 lph, and big injectors with a full radium pump hanger, fuel line, and rail kit, so the only stock part is the oem feed hose is used as the return hose now, can I mount it on the return or would that mess up the reading? Or should I install a y fitting and run it off the main line? I have the driven fab kit, but still haven't installed it because I'm not sure on this haha
Are you saying that I should NOT install the 450? Any chance I can install only the 450 pump and drive 60 miles to tuning location? Only ask cause after the kit install, seems harder to take out due to the fuel line routing around the cover of the pump and want to make it easy for tune day.
Petah hit it right on the nose. I purchased everything to support the bigger turbo for my Evo X on a conservative tune and when I’m ready for more power my fuel pump and everything else can handle it
Could you possibly post a video on how to change out the gear oil on the Evo X? Sorry this is my first Evo lol and inexperienced servicing my cars just would like to learn how to maintain my baby
Jacqueline Gonzalez That video was just filmed and I’m editing this weekend. Should be out this week! t-case, rear diff and yaw control plus we did the transmission fluid already some videos back if you need that 👍🏼
@@xtra_slo1596 Freakin Awesome! Can not wait to watch!! Thanks 😁 I really need to watch the rear diff and yaw control video as I'm sure my Evo needs those services too. Thanks you're a huge help not only to me but the whole Evo Community lol keep up the good work and hope to see more of your videos. ✌️🚗
Hey man. I bought an innovate 4-1 flex fuel kit for my X but it’s a universal kit so it doesn’t come with Ptfe lines. Do you know what exact ptfe line I would need?
I think i found it? Not sure though www.maperformance.com/products/radium-fuel-hanger-return-kit-2008-2015-mitsubishi-evo-x-20-0249?variant=20596952956998&gclid=Cj0KCQiAqo3-BRDoARIsAE5vnaKDQUE5YMqPD1Ek8AREar_NOSKuvlkliSspsaKjOOqX76nXyrrEwmkaAprOEALw_wcB Or? www.maperformance.com/products/map-fuel-feed-line-kit-mitsubishi-evo-x-map-evox-ffl?variant=45832276099&gclid=Cj0KCQiAqo3-BRDoARIsAE5vnaKH966GHS7jn_Yxc6YHNWSg81kk_5G35BFKy6uQuUaKCJXGNGPGyYYaAhlqEALw_wcB
Hey bro I got the ecb1 from innovative mine does t have the double headed connector for the E85 and for the sensor I only have the sensor do you know if they sell just the double headed sensor cable going to contact innovative soon maybe you can help thanks ?
![Evo X Flex Fuel Kit Install [Evolution Dynamics]](http://i.ytimg.com/vi/tiuLjFq8TjU/mqdefault.jpg)
Dude I think you’re the only one I know that actually break it down for us noobs how to do our own flex fuel kit. Very detailed video! Lol
Here to help 👍🏼 Glad everyone’s enjoying
Best flex fuel install instructions for the EVO X platform on youtube. Well done.
Thanks! 🙌🏼
You and Devin niemela have the best evo x content on UA-cam!!! Keep it coming man
Man this is great. I've been meaning to install my kit, but haven't really looked into what was needed. Looks nice and simple, thanks for making this
Confidence is key! 🤙🏼 How to get tuned from here coming out soon
Love that thanks man.i had 2 mr2 turbos. Both modified with the 3sgte. Cant wait to see the honda swap.
Big Updates coming for the Mr2 Kswap!
I never comment on videos. But great videos man. Helpin us evo owners. Appreciate ya! Keep em coming.
Hot Beef Thanks man and appreciate the comment! Glad this is helpful 👍🏼
Going to be installing tomorrow brought the same kit and wire kit from Amazon and gauge holder from eBay lol..iam full E85 tune so just want this for the ethanol content reading..your video going to make it easy to install
I bought the same kit from them! Super fast shipping
How was the install?
@@FinalDispair you can do it in under an hour
well done Muto, very informative and to the point! looking forward to seeing this corn fed beast pushing some boost!
Thanks Vince! Car just got tuned, video coming out soon!
Video was a banger! Good work!
💥💥💥 🤟🏼
Nice vid brother 👍
Dope video my boy 💯
Thanks for sharing bro! This video helps a lot.
Where can i get that plastic holder for the gauge? I need to mount mine. This video is dope!
Thanks man, you can purchase those on eBay. 52Mm gauge pod
Thats the return líne or the feed line? ,i see someone said on the evo x you have to use the return because you have 2 filter one in the rail and another one in the pump
Xtra_Slo what wheels you running on your Evo x? They look awesome man🔥💪
Ambit FF4’s
I’m still debating on going flex but with your video explanation it’s so doable even for me lol thanks man also beside bolt on what else should you upgrade before getting it tune?
Im following your channel and I think you should already be getting a tune with the downpipe, test pipe, exhaust, intake AND an intercooler. I know you have the access port but that’s no good. Get a real tune. You’re just about ready. Fuel pump, bigger injectors, Get the flex fuel kit and you’re set.
For flex fuel tunes you need minimum e85 safe fuel pump, bigger injectors, Grimm speed boost controller and the flex kit. I could loose the Cobb and get protuned on the stock computer which specifically works with the flex kit I did here. Great tuner is #1, if anywhere close to him I’d highly suggest Chris Carbee of Slowpoke tuning.
Juan Camacho got a pro tune schedule for end of September they so busy around here have to wait almost 2 months, can’t wait to get it done for sure
Xtra_Slo thanks bro will look into getting those parts slowly before going e85
@@locsautovlog8940 good deal 👍🏼
Where would your out this if you have a upgraded system? I have a walbro 455 lph, and big injectors with a full radium pump hanger, fuel line, and rail kit, so the only stock part is the oem feed hose is used as the return hose now, can I mount it on the return or would that mess up the reading? Or should I install a y fitting and run it off the main line? I have the driven fab kit, but still haven't installed it because I'm not sure on this haha
quick question this compared to the MAP performance flex fuel kit , which would you prefer?
I wonder if you are using an upgraded hanfer like the bulletproof performance. How can you connect those sensors?
Dumb question but when you run 85 and hit the gas station , what do you do at the pump if all the fuels there are like 87 89 91 etc lol
Are you saying that I should NOT install the 450? Any chance I can install only the 450 pump and drive 60 miles to tuning location? Only ask cause after the kit install, seems harder to take out due to the fuel line routing around the cover of the pump and want to make it easy for tune day.
Now do I need different injectors and fuel pump ? Or straight up just install this kit and get an e85 tune ?
What if you're already tuned and just want to know the Ethanol content will it work without a retune
Got ptsd from 17:27 , my chiropractor 🤣
What size AN fittings are used that comes with the flex sensor?
Can I run the flex fuel kit with only stock sensor unplugged (the one you pointed out) for a few days without tune? Will it cause any issues?
What size gauge did you use to extend the wiring for power and grounding ?
What pump does it have ? I have a walbro 450 but not sure it’ll work for the flex fuel kit
Maperformance also released a plug and play flex fuel kit for the evo x a couple weeks ago. Wonder how it compares to this?
Not sure, haven’t got my hands on one yet
Is it ok to run e85 on a stock fuel pump? I'm currently full bolt on and am looking to get another jump in power in my X
You’re going to need fuel pump and injectors
@@petahptr Ok, thanks I'll start looking into some
Danny Merker think future when you buy! Don’t go small and later need big that’s what I did. And I had to buy them twice over.
Petah hit it right on the nose. I purchased everything to support the bigger turbo for my Evo X on a conservative tune and when I’m ready for more power my fuel pump and everything else can handle it
I agree with all of this! Each purchase for the current but room for the future 👍🏼 need new injectors and a pump with this kit to run e85
You dont need to replace fuel pump for e85?
Could you possibly post a video on how to change out the gear oil on the Evo X? Sorry this is my first Evo lol and inexperienced servicing my cars just would like to learn how to maintain my baby
Jacqueline Gonzalez That video was just filmed and I’m editing this weekend. Should be out this week! t-case, rear diff and yaw control plus we did the transmission fluid already some videos back if you need that 👍🏼
@@xtra_slo1596 Freakin Awesome! Can not wait to watch!! Thanks 😁 I really need to watch the rear diff and yaw control video as I'm sure my Evo needs those services too. Thanks you're a huge help not only to me but the whole Evo Community lol keep up the good work and hope to see more of your videos. ✌️🚗
@@jacquelinegonzalez6763 Thanks for all the support and inspiration to keep cranking them out 👍🏼
Hey man. I bought an innovate 4-1 flex fuel kit for my X but it’s a universal kit so it doesn’t come with Ptfe lines. Do you know what exact ptfe line I would need?
I think i found it? Not sure though www.maperformance.com/products/radium-fuel-hanger-return-kit-2008-2015-mitsubishi-evo-x-20-0249?variant=20596952956998&gclid=Cj0KCQiAqo3-BRDoARIsAE5vnaKDQUE5YMqPD1Ek8AREar_NOSKuvlkliSspsaKjOOqX76nXyrrEwmkaAprOEALw_wcB
Or? www.maperformance.com/products/map-fuel-feed-line-kit-mitsubishi-evo-x-map-evox-ffl?variant=45832276099&gclid=Cj0KCQiAqo3-BRDoARIsAE5vnaKH966GHS7jn_Yxc6YHNWSg81kk_5G35BFKy6uQuUaKCJXGNGPGyYYaAhlqEALw_wcB
Do I still need this with a radium fuel pump
LoL won't be using the programing cable at all after I make a custom rj45 port for it
Could I put this on my 2016 Lancer??
Consult your tuner
Do you know the sizes for the male fittings. I bought the flex fuel kit from driven fab but I didn’t get the two small ones.
Not off the top of my head, I’d contact the company linked in the description
Hey bro I got the ecb1 from innovative mine does t have the double headed connector for the E85 and for the sensor I only have the sensor do you know if they sell just the double headed sensor cable going to contact innovative soon maybe you can help thanks ?
Also need the fuel line and connectors if you know the size and what’s a good line to buy ?
You ever get this sorted? I have the same issue, my hardness only has 1 connection. Not the two.
Anything else I would need to run E? Besides this kit
Couple videos up from this “how to get tuned” all of that is listed
“How to “ Do a Flex fuel install with your socks on. :)
Ik u made a video on your lip, but i dont wanna stop this video while its playing; what lip is on the white evo? 😂
Haha thanks for supporting all day 🙌🏼 Jdp if carbon, mine is not carbon so RA style
Can you run e85 right after installing this ?
Nah you have to wait 83 days after installing
Nice vids. Keep it up. Sub'd
Thanks man! 🙌🏼
Did you have a link to the ebay cubby/gauge pod?
No because the links always change. Any 52mm eBay pod, lots to choose from
@@xtra_slo1596 OK thanks brotha. I got the same fuel kit and i didn't know what size gauge it came with. Appreciate it. Great videos and tutorials.
@@joven760able Thanks man, glad I could help 👍🏼
My guage reads 9-10 and only one or two green bars is that okay?
If it’s on 93 pump gas then yes, on pump e85 no
@@xtra_slo1596 dawg thank you so much! I was worried sick.
@@coltonn6576 you got it brother 👍🏼
How big is the gauge. is it 52 mm?
Yes 52mm
What's the name of that and where did you get it.
www.nfsperformance.com/product-page/nfs-performance-evo-x-flex-fuel-kit
Yup from this link ⬆️ Also In description up top
@@xtra_slo1596 respect
Awesome!
👀👀👀
driven fab is dead
True, and I'm never getting my catch can so I'm pissed