How did you route your hardware sythn to your midi controller to fl? Did you use midi 5pin to your controller & then from your controller you used usb to the computer? Is your controller the master or the sythn? & how r u getting both audio & midi notes into fl? Is there a way without converting one or the other via Edison?
I ran into the issue of recording a grand piano with my synth. But when I wanted to record a bass line, I couldn’t change the instrument on the synth without also changing the instrument of the recording. Guess I’ll have to start recording into Edison before hand, thanks!
How do you stop the playback from external synths from being sluggish and jittery? When I sequence external instruments they play back choppy and some of the notes play late.
@@SpeccyMan tried that from smallest to larger, 0 change..connected synth thru MIDI directly, and tried over USB.. no hubs or any thing..no difference..but when I use Logic and sequence notes in all of those connection configurations…seamless perfect playback together in combination with Plugins and audio tracks..so..idk why FL is like that..even tried it with a different computer ..same issue.
The pan knob in fl is assinged to the wave knob of microfreak wich is why the sound went from a sinewave to a triangle wave . Just disable the send pan in the midi out (there is a triangle on the bottom right of the midi out vst) if you want to stop it reseting the sound every time you press spacebar
Why is the channel set to mic/line 5 though? I have my interface and synth hooked up via usb but none of the channel inputs allow any sound when I’m hooked to my interface . I can only get it to work without out my interface . It only shows my uad inputs when I’m hooked up to my interface but my hardware is connected usb cable not to my interface 🙃
This video is much needed for FL users ✊🏾 I’m trying to figure this exact setup right now my Microfreak output is plugged into my interface headphone Jack is that incorrect routing? Do I need to use the MIDI in/out jacks instead?
BRO LITERALLY NO ONE can explain this😂I’ve been trying to use my Yamaha Montage for MONTHS and literally no one on the internet can explain how to get it to work. The MIDI OUT plugin does not work and I set all the ports up and it STILL DOES NOT WORK!!!!
I have sounds from a hardware synths and I can also use the piano Roll with the sounds.. but recording dont work. I dont have any sound.. yet, the settings are correct I think (midi in/out, audio settings)
I'm new to FL studio. I've bought the producer edition because I want to record from a hardware synth (Novation Mininova), as well as using VST's. I am also using a Arturia Minifuse Audio interface, and a Midiman midi inteface. I cannot get FL to show either my keyboard or the midi interface in the MIDI options. I keep getting the error message. The specified device is already in use. Wait until it is free and try again. Please help
Hmm so I was so frustrated last night I didn’t know I had to record it into Edison I thought it would just playing on the channel bus visual like orbiter synths , ok I wanted you to send that to a mixer and add effects but ok, and I wanted you to assign some stuff to the knobs but I should be good from here
Incomplete tutorial as he left out the bit about assigning MIDI OUT controls to CC on the Microfreak so you can control its filter. That opens up the possibility of using automation in FL Studio to control your hardware. I do it all the time with my Bass Station II.
Gonna try this with my RD9. Whenever I try and record it straight into the playlist it never starts recording on the first beat and I end up having to chop it and what not
Bro thank you SO MUCH for this. Can you please please please do a video on how to input notes into the piano roll using this same synth? Love your content bro keep it up. You earned a sub.
@ksager123 Nada. I think a midi adapter is needed to run inline from the midi in and midi out to an interface or directly to your pc. It won't work with the USB B connector.
@@Gelato__33Of course it is, if your synth doesn't support USB MIDI. Luckily, USB MIDI interfaces are cheap (and don't need to be high quality, as opposed to your audio interface). You just connect MIDI in and MIDI out, and it'll work like a charm.
How did you route your hardware sythn to your midi controller to fl? Did you use midi 5pin to your controller & then from your controller you used usb to the computer? Is your controller the master or the sythn? & how r u getting both audio & midi notes into fl? Is there a way without converting one or the other via Edison?
I ran into the issue of recording a grand piano with my synth. But when I wanted to record a bass line, I couldn’t change the instrument on the synth without also changing the instrument of the recording. Guess I’ll have to start recording into Edison before hand, thanks!
this helped me soooooo much.. thank you
I can hear my synth and the midi out channel preset at the same time. How do I stop the midi out channel sound?
How do you stop the playback from external synths from being sluggish and jittery? When I sequence external instruments they play back choppy and some of the notes play late.
Use a smaller ASIO buffer size.
@@SpeccyMan tried that from smallest to larger, 0 change..connected synth thru MIDI directly, and tried over USB.. no hubs or any thing..no difference..but when I use Logic and sequence notes in all of those connection configurations…seamless perfect playback together in combination with Plugins and audio tracks..so..idk why FL is like that..even tried it with a different computer ..same issue.
The pan knob in fl is assinged to the wave knob of microfreak wich is why the sound went from a sinewave to a triangle wave . Just disable the send pan in the midi out (there is a triangle on the bottom right of the midi out vst) if you want to stop it reseting the sound
every time you press spacebar
Good info Right Here 🙏🏽
@@tellybeatzofficial yessir glad that helped
thanks was wondering what was happening
❤❤❤ Thank youu for this help
works, like a charm for me an this Edison is soo cool. Thank U for sharing. sub+!
Why is the channel set to mic/line 5 though? I have my interface and synth hooked up via usb but none of the channel inputs allow any sound when I’m hooked to my interface . I can only get it to work without out my interface . It only shows my uad inputs when I’m hooked up to my interface but my hardware is connected usb cable not to my interface 🙃
This video is much needed for FL users ✊🏾
I’m trying to figure this exact setup right now my Microfreak output is plugged into my interface headphone Jack is that incorrect routing? Do I need to use the MIDI in/out jacks instead?
I got a guitar jack thingy into my micro freak & interface
BRO LITERALLY NO ONE can explain this😂I’ve been trying to use my Yamaha Montage for MONTHS and literally no one on the internet can explain how to get it to work. The MIDI OUT plugin does not work and I set all the ports up and it STILL DOES NOT WORK!!!!
ive done everything and the presets just dont work. have tried everything lol. it works as a midi. just wont play th presets
I love the microfreak too. My first synth!
this shit doesnt work for me
Same
I don't see anything like that in the mixer
Just what I was looking for, I salut you my friend.
I have sounds from a hardware synths and I can also use the piano Roll with the sounds.. but recording dont work. I dont have any sound.. yet, the settings are correct I think (midi in/out, audio settings)
Microfreaks awesome
Bruh I have a micro freak and this shit doesn’t work howd u connect it?
I'm new to FL studio. I've bought the producer edition because I want to record from a hardware synth (Novation Mininova), as well as using VST's. I am also using a Arturia Minifuse Audio interface, and a Midiman midi inteface. I cannot get FL to show either my keyboard or the midi interface in the MIDI options. I keep getting the error message. The specified device is already in use. Wait until it is free and try again. Please help
He talks way too fast
True. So fast that he is slurring words into one another. Not a good habit for a content creator.
Dayum you helped me a Lot Bro thank you !!!🙏
Just subscribed ✅🔥🔥🔥🤘
Hmm so I was so frustrated last night I didn’t know I had to record it into Edison I thought it would just playing on the channel bus visual like orbiter synths , ok I wanted you to send that to a mixer and add effects but ok, and I wanted you to assign some stuff to the knobs but I should be good from here
edison info was the golden ticket thanks
appreciate this bro fr fr 🙏🏼❤️
Hi how to record the rhythm and sound from keyboard workstation
THANKS A LOT MAN!
Great tutorial😊
Underrated tutorial 💎💎💎
Incomplete tutorial as he left out the bit about assigning MIDI OUT controls to CC on the Microfreak so you can control its filter. That opens up the possibility of using automation in FL Studio to control your hardware. I do it all the time with my Bass Station II.
@SpeccyMan right, the hell is he talking about 😂 this ain't it boss
Thanks.
Gonna try this with my RD9. Whenever I try and record it straight into the playlist it never starts recording on the first beat and I end up having to chop it and what not
Use a count in!
👍🏾🔥👍🏾
Bro thank you SO MUCH for this. Can you please please please do a video on how to input notes into the piano roll using this same synth? Love your content bro keep it up. You earned a sub.
Have you found a solution?
@ksager123 Nada. I think a midi adapter is needed to run inline from the midi in and midi out to an interface or directly to your pc. It won't work with the USB B connector.
@@Gelato__33 that's what I was thinking, but I wasn't sure and didn't wanna buy one if I didn't need it
@@Gelato__33Of course it is, if your synth doesn't support USB MIDI.
Luckily, USB MIDI interfaces are cheap (and don't need to be high quality, as opposed to your audio interface). You just connect MIDI in and MIDI out, and it'll work like a charm.