Can u give closer look at ur pullar machine plz? How u made it . I also collect copper. It's very difficult for me n u did it in few seconds. Plz make a video about that machine.
Thank you buddy. It's not perfect.... but it works enough good I have to say. And the most important is that I build it my self.... and it was a fun project 😁. Thank you for watching buddy😁👍
Great video.... But dude please at least wear safety glasses or better yet a full face shield. By the way I cut mine on a band saw. Most are cut nice and clean.
What kind of plyers or clams do you use. I scrap as a hobby and work full time. At 58 Father Time is catching up on me so I’m gonna make a puller like you have there . Nice idea buddy
Enjoyed your video. Really loved that extraction machine! Is that something you made yourself? Or can I buy it somewhere? I use a hammer and punch to get the copper out but that machine looks a lot easier on the joints!
Thank you my friend. The tool is a truck lifter (crank jack I think it's called in English) and I just made the base underneath it and welded the jack above. This particular tool is pretty expensive I will say.... but I had it in my shop... so it doesn't cost me anything. If you are interested for something similar I will recommend you to buy a lifter for 4x4 offroad.... They are much more cheaper. The truth my friend is that it will not work great for every motor.... but with most of them will work fine😁😁
No my friend. It's not necessary to clean the strings and the plastic. I try to clean as much as I can. I don't know about other scrapyards.... but I think that most of them don't have problem. Thanks for watching buddy😁
@@dirtbikerebuilds4653 πρέπει να ψάχνεις λιγο... Είναι πολυ χαμηλή τιμή. Ειδικά αν έχεις ποσότητα χαλκού πρεπει να ψαχτεις σε άλλη μάντρα κ να τους κάνεις εσύ παζαρια...
Would you hv a design on paper for that tool you use to extract the copper out of the electric motors? If I want to send you private messages do hv another source?
My friend.... The tool is a car jack lifter ( heavy duty) for trucks. I don't have designs for that... Just used what I have. If you are interested about something similar I would recommend you to make a little research on UA-cam.... You will find similar tools with mine that I believe can work better 😁
Check my other video please..... ua-cam.com/video/kM17pgH_LOc/v-deo.html
Awesome video. Now that's a bucket of Copper Gold.
Brother I was just thinking on how to use my cheap truck jack to pull copper. Your set up is awesome man ✌️
Is there a build video for that puller jig? Its very cool
Can u give closer look at ur pullar machine plz? How u made it . I also collect copper. It's very difficult for me n u did it in few seconds. Plz make a video about that machine.
great work love the copper extractor
Thank you m8.... I really appreciate your support😁
i like that rig you got there.. it works so well :) keep it up man :)
Thank you buddy. It's not perfect.... but it works enough good I have to say. And the most important is that I build it my self.... and it was a fun project 😁. Thank you for watching buddy😁👍
That's pretty neat man like how your raw with it
WOW!!! Nicely done !!!
Thank you Dan😁.
Finally. Ive looking at the copper from that water filter break down. Awesome video.
Great video.... But dude please at least wear safety glasses or better yet a full face shield. By the way I cut mine on a band saw. Most are cut nice and clean.
You wear safety stuff. Fine. Stop telling others what to do. You're not his Mom..............
😂😂😂
Great idea on the puller, I am sure it cuts down the amount of time allright
that first one pulled out so perfect. too bad they all didnt go like that. sweet
Some motors are a pain in the a... 😂. Thanks for watching my friend😁
Nice video. I subscribed to this channel a few moments ago. I feel I may learn something from this channel
Thank you for your support my friend. I will be very happy if my video could inspire others people. 😁
Love the grabbing device!
Thank you my friend😁
soo much copper. love it.
😁there was more 2kg( 4.4 lb) that I forgot to film 😂.
HE NEEDS TO USE SAFETY EQUIPMENT LIKE GLOVES AND SAFETY GLASSES !!!!!
Heck yeah cause the razor blades to snap and sling
He doesn't "need" to do anything. You're not his Mom.......
🤣🤣
Good video but would be better if you would talk an tell us about it
Lots of electric motors, nice bit of copper !
😁. Thank you buddy. I've got more motors for scrapping. But as you know.... for 10' of video you have to work hard 😂. Thanks for watching😁
Top
One complaint:
WHERE ARE YOUR SAFETY GLASSES OR FACE SHIELD?
Nice bit of copper out them sharp mounts up fast
Thank you m8😁.... Hard work buddy... you know how it goes.... Thank you for watching and commenting my friend😁
Καλημέρα!!! Ορεω εργαλείο 👍
What kind of plyers or clams do you use. I scrap as a hobby and work full time. At 58 Father Time is catching up on me so I’m gonna make a puller like you have there . Nice idea buddy
What is the amount/ percentage of copper content in one rotor.
Great vid. thanks
Thank you brother😁. Im not a good "filmmaker" but I do what I can... Thanks for watching and commenting...
Enjoyed your video. Really loved that extraction machine! Is that something you made yourself? Or can I buy it somewhere? I use a hammer and punch to get the copper out but that machine looks a lot easier on the joints!
Thank you my friend. The tool is a truck lifter (crank jack I think it's called in English) and I just made the base underneath it and welded the jack above. This particular tool is pretty expensive I will say.... but I had it in my shop... so it doesn't cost me anything. If you are interested for something similar I will recommend you to buy a lifter for 4x4 offroad.... They are much more cheaper. The truth my friend is that it will not work great for every motor.... but with most of them will work fine😁😁
I wonder if it could pull large motor windings. This is still a great set up man you did good ✌️
Hey Bud, it's totally up to you but you really should wear eye protection. Great video, very helpful.
Stop it. Your not his Mom.....
woow 10 kilo awsome ;)
great video ;)
Actually 12kg😁....there was 2 more kg that I forgot to show in the video 😂.... Thank you for watching brother😁👍
@@simplescrapping even better ;) and you know it ;) ill watch ;)
Do you jave have to remove the strings and plastic later on, or it goes as is?
No my friend. It's not necessary to clean the strings and the plastic. I try to clean as much as I can. I don't know about other scrapyards.... but I think that most of them don't have problem. Thanks for watching buddy😁
Thank you for the response my friend👍
😁😁👍
Γεια σου simple man,αυτή η κατασκευή που τραβάς τον χαλκό από τα μοτέρ πόσο σου κόστισε ;;
I need buy pulling mechin let me know where can I buy it please
Nice
If anything can go wrong when you're filming...it will! Great job SM. Always worth watching. Keep up the good work.
🤣🤣. True my friend.. Almost everytime I'm filming... the phone rings 😂😂. Thank you for watching and commenting buddy😁
excellent
Thank you 😁
Thank you 😁
What is the name of that machine your using that’s like a hand crank winch?
Yes it a crank winch for trucks and heavy loads. I just modified it a little bit 😁. Thank you for watching buddy
Que bien es rapido
Good
Ευχαριστώ 😁
Tỉ lệ đồng là bao nhiêu
Nice. Do you work in railway construction company?
Thank you my friend😁. I'm an HVAC technician... I work with air-conditioning systems 😄. Thank you for watching
بدي هيك مكينة
Gaining Subs and veiws my dude
Thanks to you brother.... Thanks to you..... 😄😄😄
@@simplescrapping it's not me it's your videos man, people love them!
What's the longest stater out of?
ua-cam.com/video/_Lk8VBGJRvw/v-deo.html
@@simplescrapping I have three of these and I take everything apart for copper and I didn't know that there was one in em thanks buddy 👍
@@travisnichols2485 this particular had 2kg (4,5lbs) of copper. I forgot to film it🤣
@@simplescrapping you got a new sub for sure really enjoy your channel thank you
@@travisnichols2485 thank you brother😁.... I really appreciate your support buddy😁👍
Ωραια πατεντα.
Τι τιμη εχει ο χαλκος στην περιοχη σου;
Ευχαριστώ φίλε μου😁. Ο χαλκός έχει 5.00€ κ 5.60€....Απο που είσαι φίλος? Εγώ Αττική...
Οταν λες 5.00 και 5.60.
Απ Κρήτη
Εδω εχει 4.00 €
@@dirtbikerebuilds4653 5€ ο Β' (σωλήνες περιελιξεις) 5.60€ ο Α' ( καλώδια δλδ)
@@dirtbikerebuilds4653 πρέπει να ψάχνεις λιγο... Είναι πολυ χαμηλή τιμή. Ειδικά αν έχεις ποσότητα χαλκού πρεπει να ψαχτεις σε άλλη μάντρα κ να τους κάνεις εσύ παζαρια...
Sir machin ka naam kya h
Would you hv a design on paper for that tool you use to extract the copper out of the electric motors?
If I want to send you private messages do hv another source?
My friend.... The tool is a car jack lifter ( heavy duty) for trucks. I don't have designs for that... Just used what I have. If you are interested about something similar I would recommend you to make a little research on UA-cam.... You will find similar tools with mine that I believe can work better 😁
Check this guy... He's done a great job.....
ua-cam.com/video/Du74WrzijGM/v-deo.html
Plaise aboni
Hey bro....wear some eye protection, please!
Most of the times I wear my friend.... but some times... you know how it goes. Thank you for watching and commenting bro😁