Reel To Reel Tape Deck Repair. Akai GX-255 Vintage Open Reel Troubleshooting Guide. What Not To Do!
Вставка
- Опубліковано 7 січ 2021
- You will learn what a typical vintage reel to reel tape deck repair and restoration is all about. I repaired and restored this Akai GX-255 open reel deck back to operating condition. The number one thing not to do when storing your reel to reel tape deck for long periods of time is to leave the tape threaded in the unit. This tape deck repair and restoration had three main issues.
Other Classic Stereo Equipment Video's -
Marantz 2500 Receiver #2 • Marantz 2500 - Did I O...
Fisher 800-C Receiver - • Fisher 800-C Vacuum Tu...
Marantz 2500 Receiver #1 - • Marantz 2500 From The ...
Ultimate Guide To Vintage Audio Repair. - • Ultimate Guide To Vint...
Digital Tape Deck Audio Analyzer - • Nakamichi T-100 Analog...
Hantek 6022BL PC Oscilloscope Review - • Inexpensive Oscillosco...
Vacuum Tube Heaven - • Vacuum Tube Equipment ...
Kenwood KA-5002 Integrated Amp - • $45 - Buy This Amplifi...
Sony TA-E88B Preamplifier - • Sony TA-E88B Preamplif...
Technics SE-9600 Power Amplifier - • Technics SE 9600P Powe...
Pioneer SPEC -1 And SPEC -2 - • Pioneer SPEC 1 SPEC 2....
Marantz 10B Tuner - • Marantz 10B Vacuum Tub...
Nakamichi Dragon 1000P 1000MB 1000 DAT - • Nakamichi Dragon 1000P...
Sansui BA-5000 Power Amplifier - • Sansui BA-5000. The Mo...
Pioneer SX-1980 Complete Edition - • Pioneer SX-1980 - The ...
Rotel RX-1203 Receiver Part 1 - • Rotel RX-1203 Stereo R...
Rotel RX-1203 Receiver Part 2 - • Rotel RX-1203 Stereo R...
Rotel RX-1203 Receiver Part 3 - • The Best! Rotel RX-120...
Trio W-40 Vacuum Tube Receiver - • Trio W-40 Vacuum Tube ...
Kenwood KA-3500 - • Kenwood KA-3500 Integr...
Dynaco Stereo 70 - • Dynaco St-70 Vacuum Tu...
Bose 551 Receiver And 901 Speakers - • Bose Spatial Receiver....
Mitsubishi Stereo System - • Mitsubishi Vintage Ste...
Akai GX-255 Open Reel Tape Deck - • Reel To Reel Tape Deck...
Shootout! SX-1980 vs Nova300 - • Pioneer SX-1980 - Peac...
Harman Kardon Sixteen - • Harman Kardon Citation...
Monster Receivers From The 70's - • Monster Vintage Receiv...
Marantz 2265 - • Marantz 2265 Vintage S...
Kenwood KR-8050 - • Kenwood KR-8050. Resto...
Teac X-1000R - • Teac X-1000R Reel To R...
Pioneer SX-1250 - • SX-1250 - The Best Pio...
Pioneer SPEC-1 - • SPEC-1 - Pioneer Pream...
Pioneer SPEC-2 - • SPEC-2 - The Most Powe...
McIntosh MC2205 - • McIntosh MC 2205 Power...
Nakamichi Dragon - • Nakamichi Dragon Casse...
Sansui BA-5000 - • BA-5000 Sansui Power A...
Marantz 2500 - • Model 2500 - Marantz R...
Sony TA-F6B - • Sony TA- F6B Integrate...
Sansui CA-2000 - • CA-2000 - Sansui Pream...
Luxman M-300 - • Luxman M-300 Power Amp...
Scott 340B - • Scott 340B Vacuum Tube...
Marantz 2270 - • The Best Receiver Ever...
McIntosh 752 - • McIntosh 752 Vintage S...
Sansui AU-9900 Part 1 - • Sansui AU-9900 Vintage...
Sansui AU-9900 Part 2 - • Sansui AU-9900 Vintage...
Sansui AU-9900 Part 3 - • Sansui AU-9900 Vintage...
Sansui AU-9900 Part 4 - • Sansui AU-9900 Vintage...
Marantz 23 - • Marantz 23 Stereo AM/F...
SAE 2400 - • Video
Nikko 440 - • Nikko 440 Vintage Ster...
Nakamichi LX-5 - • Nakamichi LX-5 Vintage...
Kenwood Eleven III - • Kenwood Eleven III - V...
Sansui G-9000DB - • Video
Yamaha CA-2010 - • CA-2010 - Yamaha Integ...
Nakamichi Dragon - • Video
McIntosh MC2505 - • McIntosh MC2505 Power ...
Sansui Eight - • The Best Receiver Ever...
Sony EL-7 - • Video
Pioneer SX-1980 - • SX-1980 - The Most Pow...
Akai GX-220D - • Akai GX-220D Reel To R...
Pioneer A-27 - • Pioneer A-27 Integrate...
Nakamichi Digital Products - • Rare Nakamichi Digital...
Sansui G-9000DB - • G-9000DB - Sansui Rece...
Pioneer Silver Rack System - • Pioneer Silver Rack Sy...
Troubleshooting Failures In Vintage Audio Equipment -
Vintage Audio Repair In 30 Minutes! - • Repairing Vintage Audi...
Vintage Stereo Repair - • Vintage Stereo Repair ...
Phono Repair And Troublesome Transistors - • Phono Troubleshooting ...
Hakko 808 De-soldering Tool A Must Have - • Vintage Stereo Equipme...
Hazards Of Reel To Reel Tape Deck Repair - • Reel To Reel Stereo Ta...
Troubleshooting No Audio In Vintage Equipment - • Vintage Marantz 2245 S...
General Failure Troubleshooting In Vintage Equipment - • Troubleshooting Failur...
Reforming Speakers - • Bose 901 IV Speaker Fo...
Checking DC Offset On Vintage Amplifiers - • Checking DC Offset On ...
Why You Must Replace Old Electrolytic Capacitors - • Save Your Electronics ...
Help For the Vintage Audio Fan -
Buying Vintage Audio? - • Buying Vintage Audio? ...
Finding A Technician To Fix Your Equipment - • Finding A Technician F...
Should You Buy Vintage Or New Stereo Gear - • Should You Buy Vintage... Beware Of Vintage Stereo Ad's - • Vintage Stereo Equipme... - Розваги
Last week I bought a GX-255, fantastic looking and in very good working state, but with tons of hiss on both tape and source, so I started searching all over to find some solution...and I found your video. Yesterday I got the C1845s to replace all the C458s and did the repair today. Wow! The hiss has gone completely, everything works perfectly. Thanks to your video.
This is a beautiful piece of stereo equipment! Nice job restoring it!
Thank you very much!
Thats exactly what pips want to hear!!!
Great narration pal!
these videos ... are incredible. years of experienced paired with thorough explanation... amazing combo
Wow, thank you!
Excellent content sir much appreciated.
I have three vintage realtorials that I either got for dirt cheap or were given to me.
Quality is still quality and all they need is a little TLC.
Awesome sounding machines.
Wow, really great knowledge! That Akai was made during my high-school years!!!
Another great video. Love your enthusiasm about vintage gear. Thank you for sharing. I have the bigger brother of that deck , Akai Gx 525, they are great machines. 👍👍👍👍
Thanks for watching! Yes, Akai made some really good decks back in the day.
Absolutely love it! I’m digging into this vintage tape machine content deep since I got out my Dad’s Akai X-360D and cleaned it up 🙂
Sounds great! Good luck with your project and thanks for watching.
@@vintageaudioaddict absolutely and thank you! 🙂
Greetings from Denmark ! - I just loved your video (and that AKAI model) also the narration - i'm a bit of a sucker for listening to different dialects ;) Happy Akaiiiiing
Thank you for the useful information
Firstly: Great video. Clear explanations, straightforward, no bs. You diagnosed this deck really well. And those 458's, I'm always surprised how they went bad after these years, as they were the go-to NPN small-signal back then. Also their matching PNP's (726?) need replacing for the same reason. Carry on!
Glad it was helpful! Yes, the 726 is another troublemaker. Thanks for sharing that.
@@vintageaudioaddict do you know a good place to order those parts?
@@Centerstagerentals check with Sparkos Labs, if they don't have it they may be able to point you in right direction, they're nice people
Priceless information. Thank=You Very Much.
Very welcome! Thank you for watching.
Nice repair and restore, those decks sure have a lot of appeal. Always wanted one, but never pulled the trigger.
Thank you! Yes, tape units take a bit more care and the tape in not cheap.
That was an Outstanding video----Thanks!!!
Glad you enjoyed it!
great video
Good video.
Thank you very very much for this beeeeautiful video!👍👌😊
Glad you enjoyed it! Thanks so much for watching.
As a broadcast tech, I used to repair Otari MX-5050s, Revox A-77s, B-77s, A-700, PR-99 and Studer B-67s. My favorite was the Studer B-67, beautifully made and massively built. No expense spared in its construction. I have a number of Revox A-77s and a B-77 for my own machines.
Thank you for sharing.
Very nice.
Good info
Just picked up a Teac A-2300 SX 7" reel to reel a local diskjocky owned it and I even got a tote of reels with it..only about a handfull of then was worth keeping but I'll keep the reels and add some tape later to them.nice video
Nice find! Thank you for watching.
Hope you got the right and left channels to their optimum sound ing levels so they can work good together , as intended by the manufacturer. Those new transistors SEEm to be made of a more solid material .
By the way, beautiful those 2 doves that started it all, like that ALso beautiful R2R machine , which just needed some reel TLC...
Great upload,, I’ve always left my tapes on between listening , I won’t do that anymore.
Thanks!
Hi Vintage Audio Addict, I am new to your work shop, very interesting, PHIL FROM THE DARK SIDE OF THE MOULIN FRANCE.
thank you!!!
Nice channel.
Thanks and welcome
I like your video, I like vintage audio*
And consequently I subscribe to your channel 😄
(*marrantz 4270, ditton 66, revox B77, sony TC630, kenwood kx1060, denon drm3, jvc jla40 and some other stuff who need care in the bassment when I'll be retired...)
I’d have put some insulation sleeving or heat shrink tubing on the legs of the replacement rectifier at 6:15. Shining like brand new!
Muy buen trabajo
Informative video thank you I own 2 akai reel to reel decks one of them has similar symptoms as your r2r noisy knobs should I go through and replace those problematic resistors you mentioned in your video
Very useful, thanks a lot! Actually, the same applies to Akai Gx-625, which is a bigger, but very similar machine.
Your welcome and thank you for sharing.
beautiful machine, great tips and description of workings. Ive been rockin' and old Webcor 2 track for about a year and works great after some basic cleaning....I couldn't find a belt for it so I made a temp one out of cloth friction tape and still holding strong. I run digital tracks through it to get that tape mojo...Its great at taming the transients and tightening the lows...It adds a bit more highs than I would like leading me to eq because of it; This was with Scotch 111 and looking to try Scotch 176 and others to see how it affects the sound.
hi worked on alot of uk model reel to reel i love them as parts are easy to find have worked on 2 akai 1800ss decks
i had a big job for me i had to change alot of bc182 the vu meter were just not right i was working on a brannell mini 8 all RS parts stock if i need parts
like the way you do the video i allways said no need of any faces in video's i did a demo run of video along time a go works out the same
Thanks for this video, i bought a GX-255 today and will get it sunday, it's from the first owner and look as new, and play like new, with the original dust cover, do you recommend to replace the 458 transistors although everything works fine ?
Does this unit have the glass heads? If so should you be concerned about shedding tape oxide? Great video btw. I’m currently fixing up an AKAI 4000ds mkii
my akia 635d wont record both left an right ,,i did change some 458s on the playback right as it was nasty sounding i bet i have sick ones now in the record preamp got 20 1845s coming... great vid too
Great video! What about record? Did it work?
Nice job , I really appreciate you teaching, and you are a really good broadcaster! Do you do private consulting?
Thanks a lot for the kind words but I'm just a hobbyist not a professional. I only work on the equipment in my collection.
Amazing video! I only have one issue with my Akai. When I go to record via the input 1/4 inch or rca, I get incredibly low input signal and it’s all high end. Very Tinny and thin. I can’t figure out the issue
Great brakes on that deck! Looks great now.
Teac 2340r worth $100? Comes with 4 pre-recorded tapes and three 7" blanks. Person said "was working when I stored it. It has the tape left on it just like the one here ☹️ he said he'd consider $75.
Oh he did say it powered up whatever that means, could mean one bulb lit lol.
Another great video thanks!
Thanks for your kind words. I'd spend $75 or $100 on it. Just expect to spend a little bit of time getting her up and running properly.
@@vintageaudioaddict Just what I wanted to hear! Thank you very much for responding.
@vintageaudioaddict I acquired the same deck…plays in both directions fine but only records on one channel. Both inputs are hitting the meters and pass signal when monitoring Source but monitoring Tape reveals the issue. Since the playback fidelity is great, should I try to eliminate anything else before replacing all the original transistors? Really love your channel and repair approach👍🏼
Can you tell me where you buy your tape head cleaner ? Haven’t been able to find the Lasermedia for sale anywhere
Chris...your videos are always inspirational. I am working on my Pioneer 1020L and there are a number of transistors that probably are on the naughty list. Do you have a good cross reference for these vintage transistors? I have this beast ripped apart and now is the time to make the replacements if needbe
Here is what is in my R2R:
2SC1344
2SC1000-BL
2SK30-Y
2SA672-B/C
2SC1213-B/C
2SC789-O/Y
2SC1444-O/Y
Any others on the naughty list? Thanks.
I have a Tascam 42b and am having channel intermittent dropouts and low audio like you described with the transistor problem. After looking through the component lists I don’t see any 2sc-458’s used but I’m curious if there are transistors that are known to have problems from the same time period?
Hi I don’t have any playback etc could you please tell me what type of replacement bridge rectifier you used..part number? Thanks
Mui lindo grabador
Saludos :)
Hello, I basically have the same one, everything original, mint condition. Ive looked all over the internet but I couldn't find a price for it anywhere. What would this one sell for nowadays? Thank you.
what did you use to replace the bridge rectifier?
Great video. Thank you for sharing. I started research into refurbishing my AKAI GX-255, and your video was the first thing I saw. How do you test that the tape speed is correct?
Thanks, glad it helped you out. You use a special test tape to test the speed correctly. That's probably not something that you have. You then can use the tape with a wow/flutter meter. The speed will probably be fine as long as the tape path is operating correctly.
@@vintageaudioaddict Good to know. I wondered if if was something similar to setting the timing on a car using a strobe. Thanks again.
Is there an update to those resistors or do we just go OEM
I have an akai x-165d with an intermittent right channel, going from soft hissing to loud. Can someone advise on which component is likely to cause this?
I owned the GX-255 Loved that machine. Had several issues with it and became unrepairable RIP
Sorry to hear that you lost her.
@@vintageaudioaddict Thank you, I have several machines to fill the void.
I live in Southern California, and I am looking for help with my AKAI GX-255. Do you know of a place or a person who could help diagnose and fix my deck? The play button works in the forward direction, and all the other buttons do not work... All of the other functions with the exception of the deck buttons for FFW, STOP, and REC, seem to be OK.
Thanks for the great video as always. I have an Advent Model 100 Noise Reduction Unit from 1970. It has several 2N-4058 and 2N-5458 transistors on the record and playback boards. Are these transistors the same as the aforementioned 458? If yes, what should hey be replaced with? TY.
Your welcome. I'm not 100% sure about the 2N-4058 or the 2N-5458 in your Advent. The 2CS458's I replaced with KSC1845's.
@@vintageaudioaddict TY I need to have the power cord replaced and I'll ask the tech at Audiowright Store about it.
A real shame the previous owner neglected this deck like that.
Yes, it is but this GX-255 can now live on. She may be operating in another 40 years. Thanks for watching!
@@vintageaudioaddict But did you fix it the way its Maker wants it..or are you taking some liberties of your own...? My personal experiences looking back 40 years , taught me that probably won't work...Shema! You hear..?k
@@alexstewart8097 I have a similar Akai that had playback transistor failure on one channel. I modified it to handle tapes over-recorded on other machines. I'm not sorry I modified it.
Sweeeeeeeeet !
She is a sweet little open reel. Thanks for watching!
thanks for your videos and sharing your knowledge . Could you let us know with which transistors are you replacing the 2SC458 ? thanks daniel from France .
At 7:54 he shows that he replaces them with 2SC1845.
@@cjay2 thanks merci ! I did not noticed it .
Your welcome, Daniel! Thanks cjay2 for answering his question.
Have a GX-625 forward, rev, or stop. No light up or movement . What transistor/capacitor should be changed ? I will pull the board and so one esle will put in parts.
Really impossible to say. If the unit appears dead with nothing operating the power supply would be the place to start after checking that the main fuse is not blown.
Would this bridge rectifier problem exist also in a Teac A-3300SX Reel to reel machine?
Bridge rectifiers are usually pretty reliable but yes they do go bad in Teac's from time to time the same as any other piece of vintage equipment. Your 3300SX being the age that it is it's not unusual to have some issues.
Appreciate the tip of 458 transistors.
Your very welcome.
Thanks for the great video as always. I have an Advent Model 100 Noise Reduction Unit from 1970. It has several 2N-4058 and 2N-5458 transistors on the record and playback boards. Are these transistors the same as the aforementioned 458? If yes, what should hey be replaced with? TY.
I have a sony reel to reel needs some TLC and repairs...
but i could watch people repair these machines for decades...
It's fun to watch ..
But i myself try and repair my recorder??... i can not do that!!
I understand things like capacitors and transistors and the mechanics of the machine but if i tried to take it apart, I'd never get it back together again..
And as i said, i know what for example what a capacitor is...
But wouldn't know how to do the soldering work or how to test the cap and all the other components..
And even if i knew how to test it with say a volt ohm meter... i wouldn't know what the rating should be or what the reading will be if it's bad.. or what even the right properly rated replacement parts for caps and transistors should be for my recorder..
I'd only break the machine more than it already is..
The reel to reel tape machine i have now also has a few mechanical issues too..
I just wouldn't attempt repairing it myself..
That's just a bad idea..
If i could find someone close to where i am, to repair and "tune up" my reel to reel recorder I'd gladly (and rather) pay someone to do it...
I’ve acquired a Akai M10 from my uncle. I’d like to get it running again and surprise him for Christmas. I’m afraid to work on it because I’m not familiar with working on it. He purchased it overseas when he was in the military. I live in California (Palm Springs )and I’d like to get it to someone who could help
Where are you located? I just got this exact deck, and I would love to have a pro take a look at it and fix it.
Hi, I'm not a pro just a hobbyist. I only work on the equipment in my collection. Thanks for watching.
Have you worked with Technics 1506? The question has ceased to work in play mode, the right motor. The motor itself is working. Could it be the transistors?
No, I haven't. Technics made really great open reel decks. It's so difficult to say what your issue could be. sorry that I can't help you out.
Hello.i got issue with my akai gx 266 ll dont reverse play stop only if i live my finger in to botom if i let go keep play dont stop . Problem with botton.can you tell me what wrong with? Thank
I really can't say for sure. These decks are 40 + years old. Almost all of them need a complete service to operate properly.
I have an Akai GX-270D. When the tape begins to play it almost immediately slips off the capstan causing the reel to speed up to FF speed. Everything is clean and in apparent good condition. Any suggestions on how to correct this?
Could be a tape tension issue if everything else checks out.
@@vintageaudioaddict I agree. Is there a way to increase the tension?
got my 635d recording again changed out the 458s...just bought a 255 really nice shape reverse does not work...next job to fix lol
oh ran it today the 255 is now working both directions ,,a lasy cap???
How do you repair a no rewind on a Craig 2024 reel to reel recorder
I had the wrong model number , I have a Craig 2402 4 head reel to reel recorder that will not re wind. Everything else seems fine. How would one fix that problem ? Thanks
Anyone had to replace the motor on something like this? I’m trying to get one going but I’m pretty sure the motor is bad.
I had a teac. Sounded great but sadly had to let it go as I couldn't get new song recorded.
Sorry to hear that. I have a few different Teac's. They are really good decks.
@@vintageaudioaddict yes Sir. The best part you can play your favourite music non stop. Sunday mornings I will clean the heads and after that it's music!
Where can you get blank tapes?
eBay for one but there are other sources. Google "blank open reel tapes" or "blank reel to reel tapes"
Do you sell any of these?
Do you have any au 101 Sansui amp parts units ? Does anyone reading this ?
No, I don't. Here in the USA, eBay would be a place to look.
I don’t know why but the last 2 cans of deoxit I have got you couldn’t hardly get the straw in it.😬
Thanks for sharing.
Since you don't do repair work for others could you recommend someone or place of business to send my teac machine who does good work?
I don't know of anyone personally. I suggest that you go to audiokarma.org , you can probably find someone there that can recommend someone.
Sam Palermo of Skywave Broadcast Engineering used to repair Teac decks.
My reel to reel player is trying to kill me its suddenly shocking me. Advice?
Find an experienced technician to take a look at the unit.
♥️💘💝👍💝💘♥️
Thanks for your visit.
These machines always sounded very nice and should have been preserved accordingly.The previous owner must have jumped to the CD players .
I think this GX-255 just broke down and the previous owners put her in the closet.
@@vintageaudioaddict
Yes, this must have hapoened.
Regards.
Umesh C U
UV lights, light up
Thanks great! Those 458's are a problem in vintage gear of all types.
Do you repair
If you would like to repair and keep a real real good one worth having the kind with always consider the worst of the real real sorry the best but they were also much better than that Otari that’s probably the best overall and packs professional stuffed with meat run all day OK who is never a professional aunt Vera barely amateur
Interesting video, but why do you remove almost every inhalation? As a viewer/listener I get very stressed by listening to your voice over without almost any pauses. You sound so stressed, even if the content is good.
Dunno why you got your knickers in a twist over the tape oxide residue, that could happen in one minute of tape operation if the tape is old and suffers from sticky/shed syndrome. Geez calm down man!
Класс!