Complete Engine Repairing and Restoration How to diesel engine repairing
Вставка
- Опубліковано 28 вер 2024
- How to engine repairing and rebuild. Rebuilding an engine. How to diesel engine restoration video. How to repair engine.
#howto
#repair
#engine
#restore
These are the first guys I've seen in this series of repair videos that have had power tools. Impact drills/wrenches.
😍❤️
But no torque wrench, which is quite alarming
Luckily no torquewrench was being hurt during the installation of the cylinderhead that day
They'll catch it next time.
also no thread locker was ever misused 😄
👍👍👍🇺🇸🇺🇸🇺🇸
You need knowledge of tightening sequence for cylinder head,crank and Conrod caps. You need to use a torque wrench to avoid unforced errors
Also not damaged, workbenches.
Jovens menos de 18 anos trabalhando juntos com seu pai aqui no Brasil não pode vocês estão de parabéns 👏👏 que Deus o abençoe 🙌🙏 22:40 abraço Jaú SP Brasil tá chovendo muito aí 🙌🙏
yet another OSHA safety training video at it's best !
My God! How much dust goes into a rebuilt engine? what about toque settings?
Good to see they have at least one power tool. Nice work gentlemen.
Thanks 👍
It's a toy one that makes noises. Sorry to disappoint
Perhaps in the next episode they might get a real one. To be concluded
Have they ever heard of a torque wrench? Or about the strict order of screwing the bolts to the head? It's generally spiraling. or about centering the coupling
Xin chào..các bạn làm việc rất tốt và chuyên nghiệp..xin chúc mừng và chúc sức khỏe🙏🌾👍
Какая там охуенная погода - ни пыли, ни ветра. Одно удовольствие собирать на свежем воздухе)
Dear Brother ,
Thank you very much for your nice and fàntastic video .
With lots of lots of lots of love 💕💕💕 and regards ,
Jayantàda ,
13/1/2023
Many many thanks 😍❤️❤️
Охренеть! У них есть нормальный инструмент а не три ключа на всю деревню, но на то как притягивают ГБЦ всё равно было больно смотреть
Они вообще красавчики, Двину на колене собирают, нашим надо так учится, и в быстрые сроки по любому, всей толпой конечно быстро, и оперативно
То что гбц они так притягивают, значит знают что и как надо, по любому, они на этом собаку съели, это мы у них должны учится
@@Dmitry14region на некоторых моторах в руководстве по ремонту прямо указано - затягивать после подтяжки гайки до упора на столько-то градусов...
A ty byś lepiej potrafił
@@Dmitry14region они делает правильно, иначе коленвал не смогли бы крутит в ручную, каждый болт гайка в ручную без натяжки и подгонки тогда все будет норм в руках профессионалов.
Такой голос у них как будто миньоны движок собирают.
Ты в этом точно убедишься если поставишь на х2
A nice clean work Bench this is another first for me,,😊
Its good to see those young boys ( working part time after school ) are learning a trade. Im just glad i dont have a well close to this place.
😍❤️
Not a torque wrench in sight & dusty work area, glad these guys dont working for boeing reconditioning jet engines
If these guys had the facilities and the tools and worked along side Boeings staff they would put Boeing to shame
Have you looked up Pakistani jet engine repair on YT yet? Just occurred to me to do just that.
Why you did not use "dynamometric tool"for good measure screwed pins?. It is looking crazy.
Her kalınlıktaki cıvatanın bir sıkma kuvveti vardır buda tork anahtarı ile yapılır. Nedense siz Pakistanlı ustalarda bu anahtarı kullananı görmedim. Aslında motor temiz ve kapalı yerde yapılır toz ve uçuşan kum ve pislikten korumak için. Sizin çalışma şartları daha iyi olsa iyi olur. Ellerine sağlık kolay gelsin.
Wonder how many minutes this thing lasted under a load? I didn’t see a torque wrench in this video. These people amaze me. All the hard stuff they do WITHOUT using air tools or specs info LIKE bolt and nut torque specs. No ratchet tools? Very few even have a shop with a real concrete floor. All work is done in the dirt.
Did the cylinders get honed out with stone?
New liners I thought?
New liners but in another of this guys videos they honed them with a proper cylinder hone after installation to give em a good crosshatch pattern for the rings to seat proper. Just did not show it in this video but you can see the crosshatch pattern during piston installation.
Waoo zabardast 👍👍👍❤️❤️❤️
awesome job but I would at least look at the sequence of tightening the head bolts down.
They work their way from the center out and not in a circle.
Saludos desde Argentina 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻🇦🇷🇦🇷🇦🇷🇦🇷
Deus abençoe todos vocês
Theses guys do a lot in Engine repair work, looking at this engine i get a feeling how often do they change the Oil in these engines; ? I meen there have been a few seized engines, ? In these Videos, 😅
Simplesmente o melhor
MM77 Approved 👍🏼👍🏼
Зачем так забивать новые гильзы
Esta bien chingon el jale que hacen mis respetos
Allah given this power to do these things were easily
Well done gentlemen and lads.. You just know it's a big job when there is a nightshift..
Love you Pakistani driver and machine
Bai jab ap truck driver ka. Review be kya. Kara
Çalışkan insanlar 👍🏡👍🤓
Протяжка головки оригинальная , через пару месяцев прокладку придётся менять.
Personas extraordinarias
Nice work.RESPEKT..these workers get maybe 1 $ aday.
Great Job
How do they remember what bolts go where?
👍Good
Kalau di indonesia turun mesin bisa satu minggu
Never met a small hammer they liked to use.
Super
❤️❤️❤️
Да такого ремонта я в жизни не видел,и они хотят показать,что этот двигатель будет ходить?
Los pares de apriete no los respetan mucho....
Ya it's crazy everything is just impacted back together and not torqued. Especially inside the engine and wheres gaskets
Oh yes thees guys are really moving now. 😊
20:44 a table!
Волка,ноги кормят. Вот это об этом. И никто не курит, посидели бы перекурили.
You don't need torque wrench when you have hammer gun. It has automatic built in torque
Wonder if sand is a factor in your repairs? 4 to 5 guys walking around stirring up sand a other debris. I would worry if that was mine.
its an engine rebuild, not open heart surgery
@@noellynch1094 ya....exactly. Sand can score all the surfaces that parts rotate on. Its very critical to keep clean and free from junk inside
السلام عليكم ورحمة الله تعالي و بركاته
Walaikum Salam
Its very disappointing . After all that good work .
Instead of good coolant , they add normal water in the radiator . 👎🏻
23:24 палец со свистом от руки?
I like the sealents! Women's face cream. and great torque techniques, guess!!
It's Amazing The Ingenuity....
gut
I find it Fascinating that nobody uses a Torque wrench in Pakistan, I guess they don't believe in it, there is a important reason for it,
I would never let them touch my engine.
Buenos mecánicos y muy mañosos
Muchas gracias ❤❤❤
Very very talented boys too dam smart boys ilike them Australian
Here we go again. Bloody Cylinder head on floor in Shiite &
sand , These guys could do wonders for someone with a seized B.M.W engine stripping it down in the same conditions ,?
Maybe i spoke a bit early about cleaning, 😮.
пАКИСТАНЦЫ И иРАНЦЫ НЕ ОБИЖАЙТЕСЬ , Я ВСЕГДА ГОВОРЮ ПРАВДУ ПРО ВАС ---Я ВСЕГДА УВАЖАЛ ЛЮДЕЙ ТРУДА И НИ КОГДА НЕ ИЗМЕНЮ СВОЕ МНЕНИЕ О ЛЮДЯХ ТРУДА .
Скажите хозяину машины,что масло в моторе надо вовремя менять!!!
Right 👍
а ко вам сказал, что он не вовремя меняет!???
ما شاء لله
❤️❤️❤️
Bhai ap kahn se ho
Rahim yar khan
oh shit they're using air tools, this should go faster.
😍
見光死，全部作廢。
10
Скажи им что бы никогда масло в фильтр не наливали!!! Это глупая ошибка!
почему нельзя.?
👍👍👍👍
😍❤️
You now way those ingen get damage the water thy put inside de motor use colant anti freze water for ingene not good gets parts rosti an damage the ingeni inside
No son Buenos son bien chingones
i dont think somebody doing beter beter work
Объясните мне пожалуйста дурачку,зачем эти обвесы лишние кг,они же мешают
местный тюнинг, приносит удачу и безаварийную езду
@@ivan_filimonoff Ага и каждый божий день ремонт 🥴
@@ИскательИстины-п3м там ремонт - как у нас машину помыть - регулярная копеешная процедура
❤️❤️❤️🇰🇭🇰🇭🇰🇭🙏🙏🙏🙏
❤️❤️❤️❤️
Bad truck variety🥱
They sound like minions
i didnt see no head guides when they put the refurbished head back on, lets use the impact to torque the head fk it 🤣🤣🤣
Work like slaves !?
мЕНЯ ЗНАЮТ МНОГИЕ НА ВОСТОКЕ И ЗНАЮТ ==Я НИ КОГДА НЕ ВРУ ==ЭТО МОЕ НЕИЗМЕННОЕ КРЕДО .
Интересно, сколько водила бабла отвалил за ремонт?
That are very difficult working conditions and you still are able to perform a great job. Thanks, I really enjoy your videos.
Thank you so much ❤️❤️❤️❤️
Я не мастер конечно я так и не понял в чём была проблема мотора .Вода в место антифриза даже в тёплом климате думаю не очень хорошо на долгую. И смотрю у них всё пневмо инструмент но там же есть моменты где усилия должны быть определённые при закрутке болтов я хз )) А так они реально молодцы моторы переберают как семечки )
😍👍
Это и есть настоящий кап. ремонт.
У них все норм, высшие профессионалы, без лишних движении. Чистый кап ремонт.
I think I'll air freight my old Subaru over to these guys. It needs a complete going over.
Anything from a heavy goods truck to a motorcycle, they can do.
Eu amo mecânica. Fico fascinada com o funcionamento do motor, tenho carteira de caminhao mas nao to trabalhando na profissao. Sou fã de vocês, com seu trabalho espetacular. Sou admirada por vocês pelo seu trabalho que e de muita importancia. .um grande abraço De Rosana do Brasil....Que Deus abençoe voces e abençoe o Paquistao
You really have indepth knowledge of the truck engine and its connections. Well done.
Thanks ❤️❤️
Sadly soon all combustion cars including classics will be banned from public streets in entire EU and Scandinavia :-(
In Germany the Green Peoples Party gave order to shorten fuel supply from 2025
on by reducing all conventional fuel stations to only one state operated central gas station per city or county. Now they want to slow down all the gas station pumps from 20 litre per minute to 2 litre per minute...From 2027 on in the EU certain car spare parts will be banned too....as exhaust systems, turbo chargers and even some engine and gearbox oils...California and New York will do the same from 2027 on.... So no investments should be done in oil burning cars any longer....They even created a new kind of crime here, called emissions and smoke crime.!
Thanks for your comments 👍😍❤️
Wow! they really trying to totally upgrade the world! "emissions and smoke crime"
@@UmerAbbas8 yeah called Bundesabgasbespaßungsverbotsverordnung und Transporttourismusemissionsbegrenzungsverordnung in German.
@@Schlipperschlopper ohh I see. By the way I'm a big fan of German Engineering 💓. I heard inflation has hit Germany pretty hard. I hope you are doing good and these new laws and changes in the world turn out to be better for people and does not become like "thought crime" and so as Gorge Orwell said in his book 1984.
Nothing like a socialist dictatorship to destroy a country that is otherwise peaceful and end up starting another world war. The fuse is lit with the reintroduction of Stalinist Soviet Union by little man Putin. Soon these foolish Greenies will destroy economies and desperation will run its course again. Sad.
Thanks god they are using proper tools .
They are washing cranke shaft pistons etc after fitting , there's an edditing gap between fitting and washing
Thanks for these awesome videos. Great to see our blue collar Pakistan bros in action. How much does an overhaul like this cost ?
Around $6000 I guess 😍
Thanks for watching and comments 😍❤️
Crazy they impact everything inside the engine and all the critical components instead of using a torque wrench
It’s more guaranteed work when that engine fails.
@@Veritas419 unforgiving and relentless sharia law tolerance for failure is less than absolute zero. They cannot afford to get it wrong when a rebuild kit costs as much as a man's entire life wages.
Em agosto do ano passado 2021 mandei arrumar o motor do 2638 chipado 420 gastei 58.000.00 reais julho do mesmo ano ficou 29.000.00 reais ,a mão ✋ de obra motor ficou 5.000.00 reais oficina dóis irmãos Jaú SP Brasil parabéns 👏 jovens que estão ajudando é assim que aprende a trabalhar abraço Jaú SP Brasil
Wenn ich das sehe, vermisse ich den alten "Dorn-Voda" , von dem ich einiges gelernt habe und der mir eine teure Schleifmaschine abgeluchst hat, der alte Fuchs. Davon kann man halten was man will, doch er hatte begnadete Hände.
Auch mein Campingbus stammte von seinen Händen, ohne das ich es wusste. Die Welt ist klein, von einem Freund gekauft in der Steiermark nach Wien, der schenkte ihn mir, ich brachte ihn wieder ins Steirische wo ich mei Haus habe und brachte ihn zum aufbereiten zum Herrn Dorn. Den traf fast der Schlag als er ihn sah, denn er hatte ihn in 3 Jahren Bauzeit umgerüstet, eingerichtet, lackiert und viele Fahrten unternommen, bis er ihn verkaufte.
Und ich brachte ihn zurück. Aus Freude verpasste er dem Motor ein Service von feinsten, der sprang dann beim ersten kleinen Hüpfer an, wie ein moderner Dieselmotor. dabei war es ein alter 220 aus den 70er Jahren...
Dieser Film zeigt ziemlich genau seine Arbeitsweise, einfache Maschinen, großes Fachwissen. Danke, Dorn-Voda, alter Fuchs und Handwerker. RIP
Pakistani Truck Mechanic....
❤️❤️❤️
These guys are amazing , They are extremely united , coordinated and efficient . The young men are learning to be masters at there trade like there fathers, uncles and brothers ... There is a lot to learn from these guys . They don't need Nothing fancy , no computers no lasers NO BS ....just hard work and determination .
day 1 ...Receive Truck , remove engine , teardown , clean and machine work .
day 2 . Re assemble engine
day 3...The customer is back at work with a fresh overhaul and feeling like a brand new truck .
Thanks for your comments ❤️❤️
Right, its work this way...
You obviously don't know much about engines, and neither do they. They make lots of mistakes. This is probably the worst engine rebuild I've seen. This is so bad.
Looks like a good coordinated effort but when I see that many guys working on an engine like that I know they have to be careful not to miss anything. Im sure sometimes one guy gets ahead of somebody else and they have to backtrack. Too many cooks in the kitchen syndrome. But the boss gave it a thumbs up. Good job.
I love looking for this video's is very simple and the people's very intelligent good luck brother's
They did an excellent job! It’s always amazing how much you can accomplish working together. Great video!
linishing the crank was scarry
Trabalho incrível 👏👏
What amazes me is that customers trust these shops to actually fix their trucks and get them running again. If my local truck and farming equipment shop looked like these ones in Pakistan, I'd have to send my tucks and traxktorw over two hours away to get fixed
The proof of the pudding is in the eating.
Torque wrench?
ordre de serrage des paliers de villebrequin et serrage au couple pas de cle a choc