Wow, this is very interesting. The only real reason for holding back on purchasing the Sawgrass printer was the high ink cartridge cost, but this has my attention.
I have replaced all the four cartridges with these, but now my yellow shows "ink depleted" and won't do anything. Even the menus don't come up before this is fixed. Please help
The yellow refillable cartridge will need to be replaced. If you bought these cartridges from InkOwl, please contact us for support directly at info@inkowl.com
Although we obviously can't provide any warranty or support on inks that aren't ours, you are of course free to fill our cartridges with whatever ink you like. Of course, make sure whatever ink you use is explicitly marketed as compatible with SG400/800 as this is not the same kind of ink used in common Epson sublimation printers!
That's right, the chips do not ever need to be changed and the cartridges can be refilled and reused indefinitely. The cartridges are available here: www.inkowl.com/?p=search&q=sg400
Hi, I have an sg400... I refilled my cartridges with your ink. Cyan and black are working fine. But yellow and magenta give me this alert “ink depleted, used ink cartridge” can you help out with this? Thanks!
It sounds like the yellow and magenta refillable cartridges have a defective chip. You will need to contact your vendor to obtain replacements. If you bought them from us, you can reach us by email at info@inkowl.com
Hi , I just got the SG400 with SubliJET HD Inks... Can i use these up and then swap to yours ? Or should i just start with your brand? Not to mess up the printer head ?
Our Performance-R ink is formulated with the highest quality dispersion, so clogging is really not a risk, unless the printer sits unused for longer than couple of weeks. The ink is designed to work with the Ricoh head used by Sawgrass in their SG400 printer.
Yes, we do ship to the UK. These inks compare very positively with the Sawgrass original product, as evidenced by extensive print and transfer testing in our own SG400. The color match is very good for most applications, and the ink is formulated within the tolerances of the Ricoh gel-based printhead used.
Our InkOwl Performance-R ink is designed as alternative for the SubliJet-HD from Sawgrass. We use only the highest-quality dispersions to ensure good performance without clogging (providing the printer is not left sitting for many weeks/months unused). It is designed for the Ricoh printhead used in Sawgrass's SG400 and SG800 printers. The ink's color match is close enough to the original that for most applications, you can continue to use the same workflow you already have set up. I highly encourage you to give our product a try, especially if you print a lot because the cost savings are phenomenal!
Like with any sublimation ink, it is a good idea to use the printer (or print a nozzle check test page) every 1-2 weeks to keep the heads in good working order. However, our inks are formulated with the highest-quality dispersions and so, unless the printer sits unused for many months, clogging is not a risk with our inks.
For sublimation, we would recommend using the PowerDriver software for the most convenient and easiest way to handle color management. Of course, if a custom profile is needed, we have the capability to generate one, so feel free to contact us directly, if required.
Yes, our ink is designed to mix with original SubliJet ink. You don't need ICC profiles either as our ink is closely matched to the color of the SubliJet ink, so you can continue using the same software setup.
Wow, this is very interesting. The only real reason for holding back on purchasing the Sawgrass printer was the high ink cartridge cost, but this has my attention.
Same here
What will happen if I add normal ink to this printer?
Still gel inks yes?
I have replaced all the four cartridges with these, but now my yellow shows "ink depleted" and won't do anything. Even the menus don't come up before this is fixed. Please help
The yellow refillable cartridge will need to be replaced. If you bought these cartridges from InkOwl, please contact us for support directly at info@inkowl.com
sg1000 works
Can other brands of sublimation inks be used in these cartridges?
Although we obviously can't provide any warranty or support on inks that aren't ours, you are of course free to fill our cartridges with whatever ink you like. Of course, make sure whatever ink you use is explicitly marketed as compatible with SG400/800 as this is not the same kind of ink used in common Epson sublimation printers!
Thank you @@InkOwldotcom! I just have something on hand already, otherwise I will use your ink.
Excuse me..
If I buy this cartridges I don't have to change the chips .. anymore??? And where can I get it??
Thanks
That's right, the chips do not ever need to be changed and the cartridges can be refilled and reused indefinitely. The cartridges are available here: www.inkowl.com/?p=search&q=sg400
Hi, I have an sg400... I refilled my cartridges with your ink. Cyan and black are working fine. But yellow and magenta give me this alert “ink depleted, used ink cartridge” can you help out with this? Thanks!
It sounds like the yellow and magenta refillable cartridges have a defective chip. You will need to contact your vendor to obtain replacements. If you bought them from us, you can reach us by email at info@inkowl.com
Hi, which printer driver would have use? The sawgrass one? Do you post to Australia? Thank you.
You would use the Sawgrass Powerdriver. We can ship to Australia, yes!
I saw a good question, are these gel Inks?
Yea i read a comment from them. its gel based...Whitch is good
Hi , I just got the SG400 with SubliJET HD Inks... Can i use these up and then swap to yours ? Or should i just start with your brand? Not to mess up the printer head ?
Our ink can mix with the original SubliJet-HD, so you can use your existing ink and then swap to ours, if you wish.
so it wont kill my printer head? or clog my printer head..
Our Performance-R ink is formulated with the highest quality dispersion, so clogging is really not a risk, unless the printer sits unused for longer than couple of weeks. The ink is designed to work with the Ricoh head used by Sawgrass in their SG400 printer.
Do you ship to the UK? and how does these compare to Sawgrass ink? have you done fade tests etc?
Yes, we do ship to the UK. These inks compare very positively with the Sawgrass original product, as evidenced by extensive print and transfer testing in our own SG400. The color match is very good for most applications, and the ink is formulated within the tolerances of the Ricoh gel-based printhead used.
Are these as good as the Sublijet HD inks? thanks
Our InkOwl Performance-R ink is designed as alternative for the SubliJet-HD from Sawgrass. We use only the highest-quality dispersions to ensure good performance without clogging (providing the printer is not left sitting for many weeks/months unused). It is designed for the Ricoh printhead used in Sawgrass's SG400 and SG800 printers. The ink's color match is close enough to the original that for most applications, you can continue to use the same workflow you already have set up. I highly encourage you to give our product a try, especially if you print a lot because the cost savings are phenomenal!
Hi will it clogs the printer heads if I don't use all the time
Like with any sublimation ink, it is a good idea to use the printer (or print a nozzle check test page) every 1-2 weeks to keep the heads in good working order. However, our inks are formulated with the highest-quality dispersions and so, unless the printer sits unused for many months, clogging is not a risk with our inks.
i have a Ricoh SG 3100dn. Which iCC profiles would I use?
For sublimation, we would recommend using the PowerDriver software for the most convenient and easiest way to handle color management. Of course, if a custom profile is needed, we have the capability to generate one, so feel free to contact us directly, if required.
@@InkOwldotcom Great - I've just placed an order, New Zealand - WR Leahy
even though i refilled my ink it will not let me print, it says it's out of ink. can someone help!?
You will need to contact the vendor of your refillable cartridges about this
Works for sg500?
No, this product is for SG400 and SG800 printers only.
Anyone has a sg500 what cheap ink can I use ?
Hi, will this work by just swapping the original ink with this ink, what about icc profiles? Thanks
Yes, our ink is designed to mix with original SubliJet ink. You don't need ICC profiles either as our ink is closely matched to the color of the SubliJet ink, so you can continue using the same software setup.
where can i get the inks for my sawgrass
InkOwl
Hi. Where can I order from ?
See: www.inkowl.com/?p=search&q=sg400