eric berry thank you - definitely planned it out for a long time before starting. Super happy with it. Dometic recently released their own slide out kitchen. If I need to change my slide out kitchen in the future I’ll go with theirs for sure.
Jeremy, great video. Thank-you. Not sure how many times I have watched it now to see how you did your set up, but it is a lot. Can I get more information on your water heater?
Good question. It is a domestic tank water heater. You’ll see two little ledges inside the passenger side of the trailer. I put some square tubing bridging the ledges to put the water heater on. If I were to do it over again I would go tankless for sure. Here is a link to the type of water heater I used. www.dometic.com/en-us/outdoor/rv-and-van/heating-solutions/water-heaters/dometic-water-heater-19566
Hey! He’s moved on from bumpers last I heard. More into motorcycle parts now. It’s pretty straightforward - any local fab guy could get it done. He used the heavy duty swing out spindle and welded up the rest from steel bar and plate.
Hey, I did have to modify the slides. And it was a Dometic sink/stove but I had to chop the edges to make it fit. I could not find anything that was off the shelf.
Hey! Good question. It should fit. I have the 75 and it looks like the 75 and 95 are close in dimensions. I drilled holes in the slide out drawer and fastened through the holes into the threaded inserts on the bottom of the fridge. It has stayed really secure.
Found it at a garage sale! I think it’s an old dometic. If I were to do it again, I’d buy the new dometic slide out sink and stove. Worth checking out for sure.
@@JeremyLashinske Does the sink part not stop the stove drawer from closing? I tried sticking a Coleman Triton stove on is and it wouldn't close all the way. I figured it ran out of room to close but your's seems to close all the way fine.
@@BarryReicherter hey! I ripped the stock slide out and built my own out of sheet metal so the fit would work. If your Coleman fits inside the stock area designed for a stove then it should fit. I’m surprised to hear it doesn’t.
Just bought a Scout. So far it seems to have tons of potential, and your video confirms it! How did you mate the awning brackets to the ARB awning? My holes do not align between the bracket and the awning rail.
If memory serves the hole pattern is *really* close - I just kind of pushed them through. Let me know if that works and if not I’ll take a look at mine more closely.
@@JeremyLashinske Thanks for the reply. I would love it if that's all it took, but man it sure looks like that's not possible? Is there some way we can share pics? I'd love to see how yours mates up. I'm thinking of fabricating a flat plate adapter with some spacers, but if you got yours on without doing that, I'd love to see how. Would save me a bit of headache. Thanks!
Jeremy, thanks to your excellent walk-around and overview of the mods, we've placed our order for a Smittybilt Scout. I like the passenger side utility box, where did you find it? can you send me the dimensions? Thanks so much, great video!
Great question. Got it on Amazon - check the link: Buyers Products 1703350 Black Steel Underbody Truck Box with T-Handle Latch, 14 x 12 x 24 Inch a.co/d/1l19Nsm
Nice build. Do you travel with the tent and awning down? If so how hard is it to lift and dose it take two people.what dose your tongue weight turn out to be?
I’m definitely interested in your experience renting out the trailer on outdoorsy. I’m looking to buy a trailer and do a set up similar to this and I’m hoping to supplement the cost by renting it out but I’m worried there’s not enough of a market for the overland trailers instead of the big rv’s
It was hit or miss. We’ve slowed down on renting it out because people were pretty rough on it. There’s definitely demand though - just know you’ll be using the security deposit.
Very nice, where did you get the side box and do you happen to know what brand it is? I have been looking for that size for a while for our Smittybilt trailer. Thanks
tim N michele Davis hi! I found it on amazon. Took forever to find the right size! Buyers Products Black Steel Underbody Truck Box w/ T-Handle Latch (14x12x24 Inch) www.amazon.com/dp/B01ASXTEY6/ref=cm_sw_r_cp_api_i_SO49EbHEJ34F4
Hey very nice. Just picked up a smitty myself. I am very interested in your stove and sink unit. Is it a whole new slide unit or just sits on the current slide that smitty has? Where can I find similar?
Hey! I bought the sink set up at a garage sale. I think it’s Dometic. I had to cut the perimeter to get it to fit. I pulled the stock slide and made my own frame and bought locking slides so it stays out. Thanks!!
Basically picked one of these up because of your video! Just got it this weekend and am starting to order up some parts. For your truck to battery charging, are you running a DC to DC charger?
Just grabbed that same undercounter rev-a-shelf but it’s weird, the latch mechanism hits it, I’m not able to close the door. Did You have that issue and modify something to make it work?
Hey, that’s awesome. I ended up just tapping into the positive terminal on the trailer wiring so it trickle charges while driving. Right way to do it is to get a dc dc charger and it’s what I’d recommend
Good tourer of the trailer. Fairly well thought out, although using the sink has got too be awkward being so confined by the fender. The power supply from the vehicle to the trailer via the 7 pin plug is inadequate to provide charge to the 2 house batteries in the trailer. You should research “voltage drop” you really need the appropriate size cable connected via an Anderson plug just as a stand alone power supply to properly keep the house batteries charged and maintained.
Hey Scott, it’s amazing - I haven’t experienced any of your concerns. I’m excited to see how ergonomic your trailer is. Please post a link to the review video. Thanks!
I’m currently living full-time in a 23’ off-grid caravan in South Australia, Australia. Moving around for work. Space and planning isn’t should an issue in a full size van. When it comes to off-road, I just head off in my Land Rover D2. I’m actually just fitting out the rear for a fridge and a efficient use of the remaining space for storage. It’s simple but not easy ! Just have to do the best with the available space. Safe travels.
For the warrior roof rack, the triangular block of aluminum that you fabricated for the light bar.. can you maybe give me info on how you did it? Or can I buy a pair from you?
You had the comments turned off on your 2023 Toyota Sequoia video so sending a message here. For the 3rd row car seat setup. Can you provide how many lower anchors and tether a chefs are in the 3rd row
If you could add some more information about the tire carrier a video and or name of the person or if there’s any drawings that would be extremely helpful thank you
Great video! im looking into buying a trailer with this type of setup and bringing over to where i live in dominican republic, could i have your mail so we can talk more directly about this?
Hey I see you're in Phoenix, I'm in Tempe at ASU. Could I come swing by sometime to check the trailer out? I'm thinking about getting the Scout for my 2015 jkur. Would love to see this in person. Lets chat and hopefully we can set something up!
I don’t have a vent - I’ll say the heat has been an issue. I typically just open the top if it’s too hot. Reality is I’m not usually out camping if it’s that hot out.
I did not - just single batteries. Kids accidentally left a light on on the tow vehicle and I had to yank a battery out of the trailer to jump myself lol. Dual batteries in the trailer.
Nice setup! Looking to do the same thing here in Mesa AZ. Few questions... Where did you purchase the Scout, and did you assemble it initially or was it already assembled? WRT Dometic slide out kitchen, have you looked into where you would buy one? I'm only seeing AU sites and nothing local.
Frank Lillo I got the Scout from Northridge 4x4 on Black Friday sale. I assembled it. Not too bad if an assembly. I have not looked into where I’d buy the Dometic, but their website has a dealer search so I’d start there. There are a bunch of dealers in town. Good luck!
Is what I was going to enquire about but someone here in the comments posted ;- )) Am in Pima, this Scout is at the top of my list. Great updated video addressing the beefed up weld points and center beam, super build thank you!!
Did you add a junction box to the 7-pin connection from the tow vehicle on the trailer tongue? Would've been nice if Smitty put a junction in already but looks pretty straightforward to install. Just need to figure out to put it before or after the breakaway wiring.
I'm looking for a reasonably priced overlander trailer and saw your review. I also have an FJ Cruiser and plan on using it for power. Do you have any issues pulling the trailer with the FJ?
No issues! It pulls with my FJ and my wife’s 4runner. Because of the way I did my water, the tongue weight is around 350 pounds which sagged the 4runner a bit. But we pulled the trailer fully loaded from Phoenix to Yellowstone which has many large climbs with no issue.
Hi! The tent hasn’t wobbled once we installed it. The tent acts as a brace and keeps it from wobbling too much. The awning is the only thing that rattles a lot still. The rear stabilizing jacks have two brackets that go inside square tube receivers at the rear of the trailer. I can put together a quick video on it if it would be helpful.
@@markgx_explore7233 that makes sense. I put a water tank where the spare tire goes and built a cage over it. I mounted some tubing to the rack so I could store the jacks there. There’s a company called Habitat Off-road that offers a solution for stock trailers. Check them out. habitatoffroad.com/collections/smittybilt-scout/products/smittybilt-scout-stabilizer-jack-mount
Hey brother ? Question: How does it ride on highways doing 75-80mph? We are about to buy one to transplant everything from our jeep since doesn't ride too good when its loaded to the brim. thank you!
@@JeremyLashinske got you! We move to Texas from Hawaii, and everyone here fly past us everytime we drive at 75mph! So I wanna make sure we got a decent trailer so we can keep up with traffic on the hwy while traveling through states
I need someone to make me a bumper like what you have with a few slight changes. Can you please direct me to who did yours and see if they can do one for me. I can make it worth their time.
Jeremy, very nice build, I really like some of the ideas. I just picked up one of these used.
@@jr_jeep4470 thanks! I need to do an update video, I’ve changed some things. Good luck on your build!
Great setup! We are in Vegas, so may see if we can swing by next time we are there.
Sounds good!
That is the coolest trailer I have seen. Super sweet set up man.
eric berry thank you - definitely planned it out for a long time before starting. Super happy with it. Dometic recently released their own slide out kitchen. If I need to change my slide out kitchen in the future I’ll go with theirs for sure.
Well done on the build. I will take a few of your ideas and incorporate into my build. Thanks.
@@terryclark2015 be sure to make a video of your own so we can see!
Looks awesome considering purchasing one by the end of the year. You have it figured out ! Thans for the video
Nice set up. I am looking at trailers right now, and this one looks good because of all the mods you can add to it. Thanks for the review!
Looks like you thought of everything. Very nice..
Very nice. Would like to see more.
Looks great really nice job on the well thought of ideas.
Thanks so much for the walk-around! Great tips for customization. 👍
Very cool. Keep us updated with any new mods.
Thanks.
Dan Archuleta will do. Not sure what else to add!
Great job with the overview of your build and very nice build the smittybuilt is a great platform to build off of and make your own.
Very nice set up!! Great job
What a fun trailer. Great ideas
Great build.
A aluminum or plastic tool box above the wayer tank to place that webber into would be a good upgrade .
Super nice set up!! How much do you think yiu have in it?
We live in the North Valley. Might have to catch up. We have been looking at this for some time know.
I am in the Phoneix area and just came across this. Would love to connect and swap ideas! Thanks for the video.
Jeremy, great video. Thank-you. Not sure how many times I have watched it now to see how you did your set up, but it is a lot. Can I get more information on your water heater?
Good question. It is a domestic tank water heater. You’ll see two little ledges inside the passenger side of the trailer. I put some square tubing bridging the ledges to put the water heater on. If I were to do it over again I would go tankless for sure. Here is a link to the type of water heater I used.
www.dometic.com/en-us/outdoor/rv-and-van/heating-solutions/water-heaters/dometic-water-heater-19566
@@JeremyLashinske Thank-you sir!
I would love to see your update!
Please advise who built your tire carrier tailgate that is a really good way to free up space for the spare tire.
Hey! He’s moved on from bumpers last I heard. More into motorcycle parts now. It’s pretty straightforward - any local fab guy could get it done. He used the heavy duty swing out spindle and welded up the rest from steel bar and plate.
nice build
Looks great!
Question: what brand/model stove & sink combo is that. Did you have to modify the Smittybilt slide out to fit it?
Hey, I did have to modify the slides. And it was a Dometic sink/stove but I had to chop the edges to make it fit. I could not find anything that was off the shelf.
Great build! Ready to get the Scout Trailer soon. What size fridge is your Dometic. I have the cfx95 dz, will it fit in the back? Thanks
Hey! Good question. It should fit. I have the 75 and it looks like the 75 and 95 are close in dimensions. I drilled holes in the slide out drawer and fastened through the holes into the threaded inserts on the bottom of the fridge. It has stayed really secure.
Love the stove / sink set up! Where did you find that sink?
Found it at a garage sale! I think it’s an old dometic. If I were to do it again, I’d buy the new dometic slide out sink and stove. Worth checking out for sure.
@@JeremyLashinske Does the sink part not stop the stove drawer from closing? I tried sticking a Coleman Triton stove on is and it wouldn't close all the way. I figured it ran out of room to close but your's seems to close all the way fine.
@@BarryReicherter hey! I ripped the stock slide out and built my own out of sheet metal so the fit would work. If your Coleman fits inside the stock area designed for a stove then it should fit. I’m surprised to hear it doesn’t.
Just picked up my Scout Trailer, love the bumper/tire carrier solution. Do you have a sketch up of it you would be willing to share?
I don’t! It was custom made by a guy in Phoenix who no longer does this kind of work.
Just bought a Scout. So far it seems to have tons of potential, and your video confirms it! How did you mate the awning brackets to the ARB awning? My holes do not align between the bracket and the awning rail.
If memory serves the hole pattern is *really* close - I just kind of pushed them through. Let me know if that works and if not I’ll take a look at mine more closely.
@@JeremyLashinske Thanks for the reply. I would love it if that's all it took, but man it sure looks like that's not possible? Is there some way we can share pics? I'd love to see how yours mates up. I'm thinking of fabricating a flat plate adapter with some spacers, but if you got yours on without doing that, I'd love to see how. Would save me a bit of headache. Thanks!
There’s a Smittybilt FB owners group that may help as well if Jeremy can’t get you info.
Jeremy, thanks to your excellent walk-around and overview of the mods, we've placed our order for a Smittybilt Scout. I like the passenger side utility box, where did you find it? can you send me the dimensions? Thanks so much, great video!
Great question. Got it on Amazon - check the link: Buyers Products 1703350 Black Steel Underbody Truck Box with T-Handle Latch, 14 x 12 x 24 Inch a.co/d/1l19Nsm
Hey man, I’m from AZ too and just bought a scout. Sent you a fb message.
Nice build. Do you travel with the tent and awning down? If so how hard is it to lift and dose it take two people.what dose your tongue weight turn out to be?
I don’t lower it for travel - no issues. Tongue weight is right around 350lbs fully loaded. Thanks!
Do you have links to the water tank, hot water setup, inverter and switch panel?
Nicole And Josh Baldwin hi I don’t - the water tank is a 30 gallon RV tank which is common online. Water heater is Dometic and switch panel is Amazon.
I’m definitely interested in your experience renting out the trailer on outdoorsy. I’m looking to buy a trailer and do a set up similar to this and I’m hoping to supplement the cost by renting it out but I’m worried there’s not enough of a market for the overland trailers instead of the big rv’s
It was hit or miss. We’ve slowed down on renting it out because people were pretty rough on it. There’s definitely demand though - just know you’ll be using the security deposit.
Do you perchance know the tongue weight with a full tank of water?
I have a ton of questions for you. Kitting out my scout. What’s the easiest way to get in contact?
Very nice, where did you get the side box and do you happen to know what brand it is? I have been looking for that size for a while for our Smittybilt trailer. Thanks
tim N michele Davis hi! I found it on amazon. Took forever to find the right size! Buyers Products Black Steel Underbody Truck Box w/ T-Handle Latch (14x12x24 Inch) www.amazon.com/dp/B01ASXTEY6/ref=cm_sw_r_cp_api_i_SO49EbHEJ34F4
@@JeremyLashinske would the 36 inch width box fit there as well?
@@edwinmenzenwerth8214 yes most likely. Worst case you return it but I bet it would fit.
@@JeremyLashinske Thank you sir.
Hey very nice. Just picked up a smitty myself. I am very interested in your stove and sink unit. Is it a whole new slide unit or just sits on the current slide that smitty has? Where can I find similar?
Hey! I bought the sink set up at a garage sale. I think it’s Dometic. I had to cut the perimeter to get it to fit. I pulled the stock slide and made my own frame and bought locking slides so it stays out. Thanks!!
Idk if you have them or are will but could I possibly get the schematic of how you did the electrical and water with a parts list?
Good morning, can you help me with the bumper you use on your trailer, thank you very much
Basically picked one of these up because of your video! Just got it this weekend and am starting to order up some parts. For your truck to battery charging, are you running a DC to DC charger?
Just grabbed that same undercounter rev-a-shelf but it’s weird, the latch mechanism hits it, I’m not able to close the door. Did You have that issue and modify something to make it work?
Hey, that’s awesome. I ended up just tapping into the positive terminal on the trailer wiring so it trickle charges while driving. Right way to do it is to get a dc dc charger and it’s what I’d recommend
And on the shelf issue - you’ll notice the latch on the door is probably hitting the edge of the rev a shelf. I had to grind away a few inches.
Good tourer of the trailer. Fairly well thought out, although using the sink has got too be awkward being so confined by the fender.
The power supply from the vehicle to the trailer via the 7 pin plug is inadequate to provide charge to the 2 house batteries in the trailer. You should research “voltage drop” you really need the appropriate size cable connected via an Anderson plug just as a stand alone power supply to properly keep the house batteries charged and maintained.
Hey Scott, it’s amazing - I haven’t experienced any of your concerns. I’m excited to see how ergonomic your trailer is. Please post a link to the review video. Thanks!
I’m currently living full-time in a 23’ off-grid caravan in South Australia, Australia. Moving around for work. Space and planning isn’t should an issue in a full size van.
When it comes to off-road, I just head off in my Land Rover D2. I’m actually just fitting out the rear for a fridge and a efficient use of the remaining space for storage. It’s simple but not easy ! Just have to do the best with the available space.
Safe travels.
For the warrior roof rack, the triangular block of aluminum that you fabricated for the light bar.. can you maybe give me info on how you did it? Or can I buy a pair from you?
You had the comments turned off on your 2023 Toyota Sequoia video so sending a message here. For the 3rd row car seat setup. Can you provide how many lower anchors and tether a chefs are in the 3rd row
Hey Ray, got that fixed. Thanks! There is only one in the middle seat. That is a downside. I’m using the seat belt to secure in the third row.
If you could add some more information about the tire carrier a video and or name of the person or if there’s any drawings that would be extremely helpful thank you
Great video! im looking into buying a trailer with this type of setup and bringing over to where i live in dominican republic, could i have your mail so we can talk more directly about this?
Is that a 6 ft or 8ft awning?
Hey I see you're in Phoenix, I'm in Tempe at ASU. Could I come swing by sometime to check the trailer out? I'm thinking about getting the Scout for my 2015 jkur. Would love to see this in person. Lets chat and hopefully we can set something up!
Ya let me know!
I am planning to do the same setup for solar and battery bank, question: what about heat on sunny day for that box and the vent for your inverter.
I don’t have a vent - I’ll say the heat has been an issue. I typically just open the top if it’s too hot. Reality is I’m not usually out camping if it’s that hot out.
the articulating hitch, did it come with it or did you buy it separately? if you did, where?
It’s called a Max Coupler. Bought it online. Around $250. Definitely pricey but it has worked really well for us. Thanks for the question!
did you do a dual batt in your tow vehicle
I did not - just single batteries. Kids accidentally left a light on on the tow vehicle and I had to yank a battery out of the trailer to jump myself lol. Dual batteries in the trailer.
Nice setup! Looking to do the same thing here in Mesa AZ. Few questions... Where did you purchase the Scout, and did you assemble it initially or was it already assembled? WRT Dometic slide out kitchen, have you looked into where you would buy one? I'm only seeing AU sites and nothing local.
Frank Lillo I got the Scout from Northridge 4x4 on Black Friday sale. I assembled it. Not too bad if an assembly. I have not looked into where I’d buy the Dometic, but their website has a dealer search so I’d start there. There are a bunch of dealers in town. Good luck!
REI and camping World
Can you fit a fishing kayak under the tent?
Good question - I haven’t tried but my guess is yes. Especially if you take the seat of the kayak down.
That's bitchin' man!
Where did you get the tire carrier?
PS also in phoenix
Had it custom made by a fabricator. He no longer lives in Phoenix unfortunately.
epic!
How do I get one there’s no phone numbers
My question is about condensation issues with the rooftops?
Is there any?
On the ground we use full rain fly and I don't see that with rooftop tents.
Hey solid question. In cold weather there is condensation. There is a rain fly on RTT but they’re integrated into the tent for put up/take down.
In the end - what weight did you end up with? I have a 2 door Jeep and my towing capacity is about 2 thousand pounds.
Fully loaded it is right around 3500 👍🏻
Is what I was going to enquire about but someone here in the comments posted ;- )) Am in Pima, this Scout is at the top of my list. Great updated video addressing the beefed up weld points and center beam, super build thank you!!
Do you have plans for the battery power setup?
Like schematics on how I did the wiring?
@@JeremyLashinske Yes. I'm trying get a solid plan on how to set this up.
Did you add a junction box to the 7-pin connection from the tow vehicle on the trailer tongue? Would've been nice if Smitty put a junction in already but looks pretty straightforward to install. Just need to figure out to put it before or after the breakaway wiring.
@Jeremy Lashinske - Great job with the mods and upgrades you've done with the trailer. What steps do you take for winterizing?
Hey - because we are in Phoenix the bigger issue is keeping the batteries safe from the heat. No freeze concerns here!
@@JeremyLashinske ah...yes, that makes sense.
I'm looking for a reasonably priced overlander trailer and saw your review. I also have an FJ Cruiser and plan on using it for power.
Do you have any issues pulling the trailer with the FJ?
No issues! It pulls with my FJ and my wife’s 4runner. Because of the way I did my water, the tongue weight is around 350 pounds which sagged the 4runner a bit. But we pulled the trailer fully loaded from Phoenix to Yellowstone which has many large climbs with no issue.
@@JeremyLashinske Jeremy, thanks for the reply. This looks pretty awesome and affordable.
was wondering, on the tent rack, does it still wobble once you installed the tent? also, how did you mount the rear stabilizing jacks? 😊
Hi! The tent hasn’t wobbled once we installed it. The tent acts as a brace and keeps it from wobbling too much. The awning is the only thing that rattles a lot still. The rear stabilizing jacks have two brackets that go inside square tube receivers at the rear of the trailer. I can put together a quick video on it if it would be helpful.
@@JeremyLashinske i think i meant storing the stabilizing jacks! i saw on the video you had it by the tongue.
@@markgx_explore7233 that makes sense. I put a water tank where the spare tire goes and built a cage over it. I mounted some tubing to the rack so I could store the jacks there. There’s a company called Habitat Off-road that offers a solution for stock trailers. Check them out. habitatoffroad.com/collections/smittybilt-scout/products/smittybilt-scout-stabilizer-jack-mount
@@JeremyLashinske Just got my scout and loving the start of build, just remembering the days when i built my rig!
What is the dometic fridge model?
Mario Andrade it’s the Dometic CFX 75. It’s worked great
Hey brother ? Question: How does it ride on highways doing 75-80mph? We are about to buy one to transplant everything from our jeep since doesn't ride too good when its loaded to the brim. thank you!
It does good. Not saying you should but we definitely have before.
@@JeremyLashinske got you! We move to Texas from Hawaii, and everyone here fly past us everytime we drive at 75mph! So I wanna make sure we got a decent trailer so we can keep up with traffic on the hwy while traveling through states
A lot of the compartments are caked in dirt. What’s with the lack of sealing?
I’d agree the smittybilt seals are weak. But it’s camping sooo, dirt is part of the program.
How do you control moisture in the nose box? Mine always seems to take on humidity, probably from the bolt holes on the floor of the box.
Nom Solo I used a sealant on the bolt holes so it is a tight seal
Jeremy Lashinske thanks, I’ll try some silicone sealant on them. Very nice setup by the way.
How’d you flush mount the solar panel? I just purchased this same kit and looking for hardware. Thanks
I used some sheet metal screws from the bottom of the lid into the aluminum frame on the solar panel.
Jeremy Lashinske thanks! I’m installing electric and hot water on my scout after seeing your vid
I need someone to make me a bumper like what you have with a few slight changes. Can you please direct me to who did yours and see if they can do one for me. I can make it worth their time.
Nice work.. check out some on Overland Bound Trailer site ..
lots of dust and dirt inside your electrical box...if you don't get a better seal on that you guaranteed will have issues later.
$9000 trailer and you had to "reinforce it". Fuck that!