Hi Helen! Only machines with embroidery attachments can embroidery, but your machine IS able to drop feed dogs, so you can use a darning foot to do free motion sewing.
Thanks so much for this particular tutorial, as I have been wanting to learn how to use my embroidery or darning foot, to do free motion embroidery, on my CS-6000i sewing machine.
This is a GREAT tutorial, thank you so much. The reason I went searching for this is because last week, I attached my embroidery foot perfectly. This week, it falls off every time I lower the lever. The left side is secured with the screw, but the right side doesnt seem to be holding its position. I am doing everything you showed and no luck, the machine is about to go out the window hahah. Any ideas?
Hi Sarah Krstich ! I'm so sorry your foot is giving you trouble - please don't throw anything out the window LOL Would you mind sending me a picture of how you have the foot installed just so I can take a peak at the set up? My email is sarah @ sewing parts online DOT com
Hello Sandra! I can understand the confusion. In this video, Sarah used a method called floating. When you float, you hoop the stabilizer; however, to attach the fabric that you will be embroidering, you use a basting spray. There are other ways to attach it like a sticky stabilizer. Here is a link from our Beginner's Guide to Embroidery. Floating is mentioned at timestamp 4 :24. I hope that this helps. ua-cam.com/video/eTkTRmDy6mk/v-deo.html
I installed this open toe foot on my cs600i but I was not able to do the free motion , kindly advise me and what kind of quilting guide do I need to get to do the free motion quilting Thanks again for your kind assistance bs
As long as you are using a compatible open toe foot, you do not need any additional pieces. You do, however, need to: 1. Lower the feed dogs 2. Turn stitch length to 0 (you will be controlling the stitch length by how fast or slow you move the fabric.) 3. Change your needle to a Topstitch needle or you may have issues with thread breakage. Just in case the presser foot that you have is not meant for your machine, here is a link for one that is compatible with the Brother CS6000i: www.sewingpartsonline.com/low-shank-open-toe-darning-foot.aspx I hope this helps.
Hi, i have a Toyota ergonomic design EC034A sewing machine, can any machine be used to embroider with? and what foot do i buy. x thank you , your sit have been very useful. x
We carry a variety of feet. If you would like to find one specific to for your machine and for your project, please email or call us. Our email is info@sewingpartsonline.com and our phone number is 888-824-1192.
I just purchased a Brother hybrid machine. Thank you so much for your tutorial. It was wonderful, easy and fun to watch.
Nice tutorial ,I can't embroider with my brother sewing machine. Tnx so much
Hi Helen! Only machines with embroidery attachments can embroidery, but your machine IS able to drop feed dogs, so you can use a darning foot to do free motion sewing.
Super video easy to follow. Thank you
Our pleasure! Thank you for watching!
Thanks so much for this particular tutorial, as I have been wanting to learn how to use my embroidery or darning foot, to do free motion embroidery, on my CS-6000i sewing machine.
You really are good at this, is there anything you don't know how to do. tks for sharing
This was wonderful. Can you show how you set your free form embroidery please. The machine setting is what I meant :-)
Did you hoop your stabilizer or did you just stick it to the hooped fabric after hooping it?
thank you for great tutorial...but just want to know what is thread tension for normal embroidery and free motion quilting
This is a GREAT tutorial, thank you so much. The reason I went searching for this is because last week, I attached my embroidery foot perfectly. This week, it falls off every time I lower the lever. The left side is secured with the screw, but the right side doesnt seem to be holding its position. I am doing everything you showed and no luck, the machine is about to go out the window hahah. Any ideas?
Hi Sarah Krstich ! I'm so sorry your foot is giving you trouble - please don't throw anything out the window LOL
Would you mind sending me a picture of how you have the foot installed just so I can take a peak at the set up? My email is sarah @ sewing parts online DOT com
Is this foot mandatory for embroidery?
I thought you were supposed to hoop and put stabilizer for freehand machine embroidery. Is that not necessary on newer Brother sewing machines?
Hello Sandra! I can understand the confusion. In this video, Sarah used a method called floating. When you float, you hoop the stabilizer; however, to attach the fabric that you will be embroidering, you use a basting spray. There are other ways to attach it like a sticky stabilizer. Here is a link from our Beginner's Guide to Embroidery. Floating is mentioned at timestamp 4 :24. I hope that this helps. ua-cam.com/video/eTkTRmDy6mk/v-deo.html
it's not necessary to feed the thread through the loop in the foot as you would do with a sewing presser foot?
Yes you do.
Love this this tutorial but wondering how you got the machine to do three rows of words. I have this machine as well. thank you
Can the embroidery foots be used on lighter materials such as silk and chiffon??
I installed this open toe foot on my cs600i but I was not able to do the free motion , kindly advise me and what kind of quilting guide do I need to get to do the free motion quilting
Thanks again for your kind assistance bs
As long as you are using a compatible open toe foot, you do not need any additional pieces. You do, however, need to:
1. Lower the feed dogs
2. Turn stitch length to 0 (you will be controlling the stitch length by how fast or slow you move the fabric.)
3. Change your needle to a Topstitch needle or you may have issues with thread breakage.
Just in case the presser foot that you have is not meant for your machine, here is a link for one that is compatible with the Brother CS6000i: www.sewingpartsonline.com/low-shank-open-toe-darning-foot.aspx
I hope this helps.
Hi, i have a Toyota ergonomic design EC034A sewing machine, can any machine be used to embroider with? and what foot do i buy. x thank you , your sit have been very useful. x
Hi Is this the Brother LB6800 PRW? And does this stitch labels??
My embroidery frame doesn’t even fit under the where it’s supposed to go how can I fix that 😭😭😭, i have the brother pe550d
Is this attachment compatible with a Brother LS17
Can someone help me please, every time I stat to embryoid the thread got stuck on the bottom. how do i fix that?
my machine is a brother gs2800 no embrodery
hii, does this embroidery foot suit to brother xl2600i model?
what foot do you use for sewing
We carry a variety of feet. If you would like to find one specific to for your machine and for your project, please email or call us. Our email is info@sewingpartsonline.com and our phone number is 888-824-1192.
whats the model of your sewing machine cuz i dont see u changing sewing machine .
Hi! It's a Brother LB6800 PRW.
my machine is singer promise 1409 will this foot suit 4 my machine
Hi! Your machine would do better with this foot: goo.gl/we0sAj
Hi Mylie! Sounds like there is a bit of an error. Can you email me your address? sarah AT sewing parts online DOT com