Cool build, you should really vacuum your a/c system with an a/c machine to remove all the moisture from the system for best cooling performance from your a/c system before you recharge it since the heat and humidity in Florida or horrendous. 👍
Cars are fun, but your attitude is universally good. "I could get it dinoed but I like the way it drives". You're right, that's the point. Great craftsmanship as always.
Super funny.. I've been into cars my whole life and have owned my brz since 2015.. but yet i'm just now getting into drones and have been watching all your drone videos.. recently decided it was time to FINALLY boost my brz(Dailly) and i stumble on this video.
Nice to see you are also into cars. Everyone has the same issues with bad deliveries and damaging important parts during build up. It's part of the hobby 🙂
Nice mods sir, love my 14 wrx sti hatch, got all the stage 2 mods done ( just bolt ons) and she's ran like a champ for 6 years now! If you're ever over in st Pete, let's ride out n fly.
Always been i to cars. From SRT4 modding it with big turbo and everything else as a kid.. to now. Corvette and camaros all modded too.. we just like to go fast
Trollin a bit here but, a exhaust heat wrap on that downpipe and a turbo blanket would be my nxt install!? That charge pipe and coupler is gonna see some heat coming off that turbskiee!?✌
Not sure why they don't sell this with some kind of boost. I almost went supercharger before I traded mine in for a truck i needed. I had modified the exhaust and had a corn fuel tune. fixed the torque dip but still needed the boost. If they come out with a GR version I'll get one again.
Good point but it’s kinda fun to do yourself. I just did mine last summer and it’s really cool since it’s not terribly hard but super rewarding in the end.
I thought Drib designed some turbo for race quads . May be a capacitor boost module could do the trick. Like those piezo things we see in stove lighters.
I always wanted a turbocharged car, I went with a crouch rocket with spray. It's funny 225mph on a motorcycle gave me almost the same feeling I get doing a risky trick or flying long range with a kwad.
DREW READ ON DUDE. Your future shopping list will look something like this. 1. Cometic head gaskets. 2. Acl bearings. 3.. cross drilled heat treated or nitride coated crank. 4. 11mm. Oil pump. 5. Wiesco pistons 6 arp block studs 7arp big end / ht bolt kit 8 phenolic plenum spacers get rid of intake heat soak. 9 oil cooler 10 h beam forged con rods shot peened eagle rods or similar. 11 if your engine builder understands you need to decide on piston to wall clearance stock clearance can still cause failures in forgings need to go couple of thou more to allow for expansion but down side is piston slap on cold start and blue smoke this stops when engine hot. 12. Decide how far your gonna go before building or when you decide to push into 25 psi + and prolonged boost and heat soak it’s gonna go. 13 injector upgrade i bet your already past duty cycle of stock injectors this is potentially one of your biggest risks here if it leans out under hard boost due to injector lock up then pre detonation will occur for sure. 14 fuel pump upgrade 255 lph pump Happy modding there will be more work. Good look and stay safe please don’t go j.c route keep your speed in your goggles dude flesh is weak protect it. I’ve been over at 120mph and still here some won’t be so lucky. Even the best crash now increase safety. Stay safe your getting pulled into it now. 🙏oh yeah get on the 10/60 oil ASAP crank will now throw its oil and potentially spin a bearing thicker oil has less crank throw out and higher film sheer tolerance to protect bottom end you are beating the piss out of the stock none turbo prepped block. WORD.and finally you will strip 2nd 3rd gear box won’t take much more then 350 ftlb avoid ramming it into 3rd while in red line synchro crunch will be you first warning then couple of weeks later 3rd will just let go.block sleeves 🤯🤯🤯🤯
What are you doing for fuel/tuning? Bigger pump regulator and what not? Love a good balanced car. I like your style. Keep it balanced and fun. Big numbers are cool and all but balance and response is what it's all about. Awesome build man
stolked to seeyou doing ther install yourself/ i did a stage 2 turbo system into my 1997 VW GTi vr6. . was a epic journey. and well worth it in the end. . took three days cause i did the headgasket and studs at the time. so that was a bit of a bitch. but god work brother. whoompsho
Good for you, bro. Turned out nice! I always wanted a turbo car. It would have to be a lot bigger for me. I couldn’t fit one leg in that car lol. Enjoy, my friend 😊👍🏻
It’s funny that in Spain if you change what’s considered more than 33% you might be forced to make a safety crash test. Just to turbo up a car would be a year of papers and tons on money spent on fees and taxes.. industrial and engineer thorough analysis, inspections, etc. lucky you! Let’s see what happen with new UAS regulation in 2021, I believe tiny whoops golden age it’s to come. Salut!
Man when it came to selecting parts on FT86 like wtf did u consider out that list. I see u could go up to 7k+! Lol I would like to achieve maybe 300hp. Any input u might recommend from your build? Would like to upgrade: 1) fuel injectors 2) fuel pump Just not sure on the turbo choices etc. vid maybe? Lol ty.
I'm actually very impressed that you're not just another tech nerd and you know your way around a vehicle, nice work!
He's not the only one. I know quite a few who are both electronically and mechanically inclined... besides myself of course.
Pretty must of us are just into going fast.. my other page has my race stuff.. Q Speed Racer
Installs a $5k turbo kit: "Definitely an increase over stock" Well damn I'd hope so!
I was hoping it was less expensive 😭
@@randysavage4297 u can find a good kit for around 3500ish
@@ariyankhan4337 im just going to go sti bro
When you don't have a vehicle lift it takes twice as long. It's always nice to have a buddy with a shop that has a lift!
Love how this was condensed into ONE video, unlike other UA-camrs who split it into 6 videos, 10 minutes long each to milk that sweet, sweet money.
Ya know, I would like to see more of the work process myself.
Looooove the video man, you’ve gotten me even more excited to install mine, definitely going to be following this build from now on 😈😈😈
OMG you don't know how good it is to see someone who used to design cars actually working on one and realising how difficult they make them to work on
Awesome I have full blown Motorsport turbo kit in my GT86 trd 2019 ✌🏼
You and Steele need to do a track day!
Cool build, you should really vacuum your a/c system with an a/c machine to remove all the moisture from the system for best cooling performance from your a/c system before you recharge it since the heat and humidity in Florida or horrendous. 👍
Get it dyno tuned!!!
Guys had then on racetracks I use to goto.. great handling little car but yeah power was really lacking
The description is all we need to know everything. "mmmpshhhhhhh" - Drew Camden May 2020
Yess! I love it when you do car stuff! And turbo time!!!! Stoked for ya bud!
Cars are fun, but your attitude is universally good. "I could get it dinoed but I like the way it drives". You're right, that's the point. Great craftsmanship as always.
No need to get it dyno if he not trying to make max hp.
All I could think of was the movie jingle all the way......... "Its turbo time!"
Super funny.. I've been into cars my whole life and have owned my brz since 2015.. but yet i'm just now getting into drones and have been watching all your drone videos.. recently decided it was time to FINALLY boost my brz(Dailly) and i stumble on this video.
Nice to see you are also into cars. Everyone has the same issues with bad deliveries and damaging important parts during build up.
It's part of the hobby 🙂
You into cars as well. I'm impressed. And you know what you are talking about.
Love the sound of a turbo 🤘🏼 this project is looking sweet dude 👌🏻
Nice mods sir, love my 14 wrx sti hatch, got all the stage 2 mods done ( just bolt ons) and she's ran like a champ for 6 years now! If you're ever over in st Pete, let's ride out n fly.
Love the your old fender is mounted on the wall behind you
Yes I know you was gonna boost it now you have to go E-85
Why? Doesn’t make that much power.
What’s with this sassy Lost child? It’s like a 20hp gain. Pretty big gain
amazing work, nice car, and the content i needed. i’m really impressed with your work it’s crazy!!
Congrats ! I was so happy to turbo my FRS as well. Worth it
This makes me miss messing around with cars when I was younger.
u got the right kit!!!! Looks like the JDL. They do great work, the turbo manifolds jdls makes are dope
nice... i have a turbo as standard in my chevy but always wanted to get it tuned.
Always been i to cars. From SRT4 modding it with big turbo and everything else as a kid.. to now. Corvette and camaros all modded too.. we just like to go fast
Your content is top notch 👌🏼. You put all the clips from multiple days into one video, now that’s quality.
Im not a car person but im really enjoying your vlogs!
Trollin a bit here but, a exhaust heat wrap on that downpipe and a turbo blanket would be my nxt install!? That charge pipe and coupler is gonna see some heat coming off that turbskiee!?✌
The best part of a 86. Comes with the turbo subframe!!
And to be honest, probably at 230-250 hp.
Yeah around the 230 mark in my opinion
Not sure why they don't sell this with some kind of boost. I almost went supercharger before I traded mine in for a truck i needed. I had modified the exhaust and had a corn fuel tune. fixed the torque dip but still needed the boost. If they come out with a GR version I'll get one again.
Good point but it’s kinda fun to do yourself. I just did mine last summer and it’s really cool since it’s not terribly hard but super rewarding in the end.
I ran my water lines from bottom.
Looks way cleaner
You don't need any turbo kit to go faster. Anything that has the Rotor riot sticker goes fast.
It's cool that you are not just into quads. I'm into quads and have a 2015 WRX with a lot of modifications. And... nice RPF1s.
A1989 Toyota Supra intercooler fits perfectly in the radiator stack !
Turbo's rock. Makes all other engine mods feel worthless comparatively.
Just upgraded turbos on my 335i
I thought Drib designed some turbo for race quads . May be a capacitor boost module could do the trick. Like those piezo things we see in stove lighters.
Hey man, perfect time to pull out the tinywhoops i would love to see that in a video.
Ledrib drone and modded cars=Legend status 👍🙌🙏
I always wanted a turbocharged car, I went with a crouch rocket with spray. It's funny 225mph on a motorcycle gave me almost the same feeling I get doing a risky trick or flying long range with a kwad.
Love this car, good price, good performance, good ability to tune!!! what did u pay for the t-kit?
Miss having a turbocharged car. RIP ‘97 Eagle Talon Tsi. Lol.
this makes me even happier that your also a car dude!! I just got into FPV, but have been a long time car guy and die hard e30 guy with custom turbos.
Now you are making me miss my 86 bad!!
Drew you absolutely amaze me! The sound is purrrrfect! Cade Lipscomb has that same sense of perfection!
DREW READ ON DUDE. Your future shopping list will look something like this. 1. Cometic head gaskets. 2. Acl bearings. 3.. cross drilled heat treated or nitride coated crank. 4. 11mm. Oil pump. 5. Wiesco pistons 6 arp block studs 7arp big end / ht bolt kit 8 phenolic plenum spacers get rid of intake heat soak. 9 oil cooler 10 h beam forged con rods shot peened eagle rods or similar. 11 if your engine builder understands you need to decide on piston to wall clearance stock clearance can still cause failures in forgings need to go couple of thou more to allow for expansion but down side is piston slap on cold start and blue smoke this stops when engine hot. 12. Decide how far your gonna go before building or when you decide to push into 25 psi + and prolonged boost and heat soak it’s gonna go. 13 injector upgrade i bet your already past duty cycle of stock injectors this is potentially one of your biggest risks here if it leans out under hard boost due to injector lock up then pre detonation will occur for sure. 14 fuel pump upgrade 255 lph pump Happy modding there will be more work. Good look and stay safe please don’t go j.c route keep your speed in your goggles dude flesh is weak protect it. I’ve been over at 120mph and still here some won’t be so lucky. Even the best crash now increase safety. Stay safe your getting pulled into it now. 🙏oh yeah get on the 10/60 oil ASAP crank will now throw its oil and potentially spin a bearing thicker oil has less crank throw out and higher film sheer tolerance to protect bottom end you are beating the piss out of the stock none turbo prepped block. WORD.and finally you will strip 2nd 3rd gear box won’t take much more then 350 ftlb avoid ramming it into 3rd while in red line synchro crunch will be you first warning then couple of weeks later 3rd will just let go.block sleeves 🤯🤯🤯🤯
Can't wait for the video sayin you blasted a rod through the block. Build the motor Drew trust me been there done that.
If you like the way this sounds, you'll love electric cars
What are you doing for fuel/tuning? Bigger pump regulator and what not?
Love a good balanced car. I like your style. Keep it balanced and fun. Big numbers are cool and all but balance and response is what it's all about. Awesome build man
Very nice, would love to install a turbo on my BRZ. Headers and a tune will have to do for now. You made that turbo install look way to easy
Hey man, great to hear you've got something to do... ;P
stay sane, man
Came for FPV, stayed for Cars. Keep up Drib!
Damn, Drew could make anything look cinematic and cool with those shots
Dont have one but love this car and if i had one i'd also love to turbo it. Forester XT owner.
Love your videos, so well produced. I didn’t realise I just watched 14 min. Churn out whatever you want, I’ll watch it.
Congrats Drew, well done!!
Whoa, what's that cool thing in the corner? Is that... Is that a drone?
Nah that's crazy talk!
Not even one flying clip, haven't seen that in a while. Just got tracking for my RR SKYELINER w drib motors. Can't wait!
How much is that AE86 in your country? It looks simple but as it is, gorgeous JDM
Damn that b roll....didn't even know you were into cars, this is mad.
This quickly went from repairing a dent to adding a turbo.
Badass looking turbo kit. Nice video 🔥
Nicely done, thanks!
The studio in the beginning is looking fire tho
Haha Drew! Brilliant mod and video!!
Niice man! Are you on the stock clutch?
as we can see the eyeliner supply is running majorly low
Wait is thats a Toyota GT 86 are you sure it’s not a FRS because that badge is not Toyota
Doesn’t matter, is the exact same car.
Welcome to the turbo club brother, loading boooost.....
great job sounds amazing, so satisfying
stolked to seeyou doing ther install yourself/ i did a stage 2 turbo system into my 1997 VW GTi vr6. . was a epic journey. and well worth it in the end. . took three days cause i did the headgasket and studs at the time. so that was a bit of a bitch. but god work brother. whoompsho
Good for you, bro. Turned out nice! I always wanted a turbo car. It would have to be a lot bigger for me. I couldn’t fit one leg in that car lol. Enjoy, my friend 😊👍🏻
It’s funny that in Spain if you change what’s considered more than 33% you might be forced to make a safety crash test. Just to turbo up a car would be a year of papers and tons on money spent on fees and taxes.. industrial and engineer thorough analysis, inspections, etc. lucky you! Let’s see what happen with new UAS regulation in 2021, I believe tiny whoops golden age it’s to come. Salut!
Nice job man. Diggin it!!
Looks good Drew! 👊👊😎
Great vid Drew keep the content coming!
Do you know anywhere I can buy this car.... I really lobe it. I want one in my collection. It's simple and reliable
Next step is putting a Garret on those brushless motors! ;) Would be great to hear a dump valve sound after decreasing throttle on a quad!
Now THIS is stock plus!
Water Methanol injection kit next?! You should 3D print a snail style body for a micro & call it the turbo bee lol
you should probably get it tuned, after installing the new turbo.
Also you look so much more human without eyeliner.
He did, had it done by a local company 🤷♂️
I hope we get an update on that
Bye bye condenser its always something thats get in the way.
Freestyle quad diy??? Soon?? Just ordered it
Very sick!
Not sure why I watched this but it's something different
will be propwash on tyres :)) What will you tune the engine ? Standalone or ori Ecu or maybe PID :))
TURBO TIME!!!!!!!!!!!!!
Pleas more car stuff
Man when it came to selecting parts on FT86 like wtf did u consider out that list. I see u could go up to 7k+! Lol
I would like to achieve maybe 300hp. Any input u might recommend from your build?
Would like to upgrade:
1) fuel injectors
2) fuel pump
Just not sure on the turbo choices etc. vid maybe? Lol ty.
Ma boi got a snail! Whoootsuututututtuuu
Can I add a fake blow-off valve to my truck?
Gotta do something to get rid of that nasty torque dip from the factory.
let's run it next time you come up to atlanta.
Sweet ride
*dents fender trying to drift*
*adds power*
*can hold angle now*
so, a episode of motor riot?
Great job....
Yo I see some interior mods in there 👌 is that a 2017+ gauge cluster?