Fajnie było by wiedzieć jakie są wskazania na ekranie . Więc rozumiem za cewka 13 jest najbardziej optymalną ? 9.5 dużo traci z głębokości? Jak jest z separacja na 13?
Large coils work well at low frequencies for big targets .18'' Fighter S works well at 15kHz and lower, eg 4kHz , 13x11 works well at frequencies 13-22kHz (for medium targets) , 9.5'' works well at higher frequencies 18kHz to 40kHz. For example, a multi-frequency detector emits frequencies of 4-40kHz, but you have one size coil connected to detector (for example, 11''), this means that an 11'' coil is effective only at frequencies of 10-18kHz, the other frequencies are not emitted effectively. I have in mind that in order for a multi-frequency detector to be fully effective, a multi-size coil must be attached to it...but such does not exist. If you do a test with the EQ900 at multifrequency with 11'' coil and after at 15kHz you will not see a difference.
@@nufrii I know, depending on separation and resolution, but I'm really interested how deep can they see those small targets in a clean, not trashy area
@@bartoszdudek4744 for trashy area need 9.5'' or 5x7'' and frequency 24 or 44kHz . For extreme conditions, you don't have to worry about depth. The advantage of GM detectors is that they have good recovery speed and great depth at the same time, due to 60% analog technology even in GM7
@@nufrii I get it, know about it, got GM4 and Tangra with 3 coils, and other analogs. But still, I wonder what's the difference for that kind of objects with GM7, at a clear site. Sometimes the conditions change suddenly even at one field, some parts are trashy, and some are not. Many people often go for short huntings just with one coil. That's why I wonder what's the difference on depth, for those cases. Would be best od you make similar short movie for small target to show us :)
I have a GM 5 that I like a lot. Does the 7 have that much better performance and do these coils work on the 5?
7G coils 9.5'' , 13x11'' and 18'' works only with Golden Mask 7 and Golden Mask ONE15 Black. GM7 have very good performance compared to GM5
Finally the target is ferrous or good target? It s 1 test of separation or deep? Probably good target and the 9.5 sign ferrous
@@Susan_HunTer Read the video description !!! 1. Deep test - Fighter S 7G 9.5'' vs 13x11'' vs 18'' 2. Cooper plate Ø80mm buried at 65 cm .
is it Golden mask7 multi frequency or single ?thanks
Can you test the new GM4 extreme on gold, silver and cooper deep targets with 13" and 18" coil? Tnx!
Fajnie było by wiedzieć jakie są wskazania na ekranie . Więc rozumiem za cewka 13 jest najbardziej optymalną ? 9.5 dużo traci z głębokości?
Jak jest z separacja na 13?
Hello. At what frequency and what are the settings for that test?
At the beginning of the video it is written with yellow letters (0:08 - 0.11sec.)
14
Are the settings in this video factory settings?🤔 (It works very stable)
Yes, detector in this video works on factory settings . Stability depends on soil type and on presence of iron trash
@@nufrii Are factory settings the best and most stable settings?
@@nufrii I want it to work quietly and stably.
Yes, but If need more stable detector need to turn ''ON'' GB STAB
Здорово! Подскажите, пожалуйста, у меня GM6. В чем принципиальная разница от 7 модели?
Катушка и 4 частоты . Новая катушка 7G добавляет глубину + 10%.
Hi, will there be videos with other frequencies as well? Thank you...
Large coils work well at low frequencies for big targets .18'' Fighter S works well at 15kHz and lower, eg 4kHz , 13x11 works well at frequencies 13-22kHz (for medium targets) , 9.5'' works well at higher frequencies 18kHz to 40kHz.
For example, a multi-frequency detector emits frequencies of 4-40kHz, but you have one size coil connected to detector (for example, 11''), this means that an 11'' coil is effective only at frequencies of 10-18kHz, the other frequencies are not emitted effectively.
I have in mind that in order for a multi-frequency detector to be fully effective, a multi-size coil must be attached to it...but such does not exist. If you do a test with the EQ900 at multifrequency with 11'' coil and after at 15kHz you will not see a difference.
Can you make similar presentation, but with a small target, for example arrowhead?
For a small targets small 9.5'' coil is better ... it's like going for fish, small hook for small fish, big hook for big fish
@@nufrii I know, depending on separation and resolution, but I'm really interested how deep can they see those small targets in a clean, not trashy area
@@bartoszdudek4744 for trashy area need 9.5'' or 5x7'' and frequency 24 or 44kHz . For extreme conditions, you don't have to worry about depth. The advantage of GM detectors is that they have good recovery speed and great depth at the same time, due to 60% analog technology even in GM7
@@nufrii I get it, know about it, got GM4 and Tangra with 3 coils, and other analogs. But still, I wonder what's the difference for that kind of objects with GM7, at a clear site. Sometimes the conditions change suddenly even at one field, some parts are trashy, and some are not. Many people often go for short huntings just with one coil. That's why I wonder what's the difference on depth, for those cases. Would be best od you make similar short movie for small target to show us :)
hello. is 13-11 coil sensitive to tiny hammered coins?
No, please read HF1000 User manual - www.goldenmaskdetectors.com/detector-details-id-83-en.htm
@@nufrii I'm after gm7
You filled Turkey with these useless detectors
Is a Good detector try It before you judge