It stays at one location due to the chrome wires as if it moves at a direction then sensor triggers the charge in wire and pushes it in other side and this thing happens consecutively that's why it keeps vibrating
I'm going attempt to make this. Can you please tell me where one can source the parts from? Or atleast the electromagnet coil? Is it available? Or then how many turns and what Guage, any details? Also the magnets used, is it N35, N38 or N52 grade? The video is literally useless to yoir sponsor if one can't source parts, what will they do with the PCB?
why do you not sell the kit of this product (combo : board + electronic components + accessories,...) for student to study ( example : at least me =)) ....) i like it so much
I ended up buying a kit from eBay for about $40 (330g kit). It would be much cheaper to get the PCB "Creative Science" created and buying the components, but his is mostly SMD parts and I am just starting electronics.
How much weight can his hold up and what is the levitation distance? I need 300 units made for a gift I am designing. Need to know if it will take the weight.
@@CreativeScience Gap looks much less. Can u confirm please, it is critical. Coil height is 12 mm so this looks about 15 - 20 mm. Also the magnets in the base and floating what is the grad N35 or N38?
si, existe una manera, en lugar de cuatro electroimanes uno solo, pero es menos estable. También es interesante saber que existen formas aún mas complejas, por ejemplo con microcontroladores hacer amortiguaciones en el movimiento para evitar la vibración, las posibilidades son infinitas.
So know-how is that you have 2 coils for X and 2 for Y that being checked with comparators based on Halls sensors are being "pumped" with energy creating a magnetic field that pushes back approaching magnet?
It's better to use tl432 shunt regulator for hall element virtual supply. I made this project arround 4 years back with ring magnet. And used HW101D hall element and at output stage uses only 1 lm324 ic , total component count is 20 including ic and all passive components.
Hi bro Thanks for sharing us with your project I have a little problem when buying the components: Is the “222pF” in the DIAGRAM means 2200pF as I didn't find 222pF capacitor in the market.
Maybe you could make a cool base for the figure that you could obscure the magnet with, or you could implement the magnet into the inside of the figure.
It's a great channel but the fact there are very few responses after so much work having being put into the creation and quality of the videos is very sad. All that time creating, recording and editing only to ignore the responses. Great work, shoddy communication.
This person said he can make a one pole magnet In order to proceed with engineering designs and optimizations, there is an engineering fee of $350.00. If you wish to proceed please let me know so we can make the arrangements to receive payment and so I can let our engineering and production staff. If anyone wants hes s professional company And it wouldn't use a plug
Mad respect for hand soldiering all those … nice patience and work !!!! Thank you
😊♥️
Could you make a video explaining the science of how this works? I am fascinated by it.
yeahh plsss
It repels the magnet but not leave the magnetic field
Magnetic repulsion and magnetic licks itself at a height
It stays at one location due to the chrome wires as if it moves at a direction then sensor triggers the charge in wire and pushes it in other side and this thing happens consecutively that's why it keeps vibrating
Hi, Great video! Could you please provide a full parts list please? Thank you
Can we buy it
Hi, Great work man
can you pls send the components list used in the process it would be of great help while making this project?
I am very impressed by your elegant design, is there any way I could get a copy of it and a parts list? Also could I purchase any of the pcbs?
I'm going attempt to make this. Can you please tell me where one can source the parts from?
Or atleast the electromagnet coil? Is it available? Or then how many turns and what Guage, any details?
Also the magnets used, is it N35, N38 or N52 grade?
The video is literally useless to yoir sponsor if one can't source parts, what will they do with the PCB?
Great work!!! how much weight can the levator lift?
why do you not sell the kit of this product (combo : board + electronic components + accessories,...) for student to study ( example : at least me =)) ....) i like it so much
That build was beautiful! 🔥
Hello, can you please share the BOM file and the name of electronics parts supplier from i can buy components for this project.
Thanks in advance.😀
you have electronics part list brother? Please share with me if you have🙏
Please share BOM file
Please can you tell me what kind of divices you use and how to connect them. by making one more video
Can i use this for my research proposal?
Can´t wait to try my self, thank you so much!
do you have like an explanation video on how this works or the source on how you build this
and buy the great job. science needs people like you 😊
Simply amazing! I would love to make one of these. I downloaded the file, but didn't see a parts list. Does anyone have one to share, Thank you.
Where did you download the file?
I ended up buying a kit from eBay for about $40 (330g kit). It would be much cheaper to get the PCB "Creative Science" created and buying the components, but his is mostly SMD parts and I am just starting electronics.
@@TMRu22311 do you have a link to the kit on ebay please? Thanks for getting back to me
can you adjust to higher levitation?
why did you add the 4"woofer metal plate?
Could it have worked with just the magnet?
Used it because of better magnetic field and stability
Pls share bom file or component list if you have?
What was the project cost
Wow I can't believe it. Very nice
Thanks 😊
Lets say one wants to make it double size ,how would we achieve it ? ,just double everything ?
How much weight can his hold up and what is the levitation distance?
I need 300 units made for a gift I am designing. Need to know if it will take the weight.
It’s can hold maximum 500gm and distance 30-40mm depending on weight
@@CreativeScience Gap looks much less. Can u confirm please, it is critical. Coil height is 12 mm so this looks about 15 - 20 mm.
Also the magnets in the base and floating what is the grad N35 or N38?
I thought the distance for levitation could be higher, say 100cm,judging from the improved technology,.
Please could it be done?
Very very nice your very clever UA-cam have science
Can it operate upside down? With the woofer metal and fixed magnet affixed to the table?
Can you share the whole piece list? I couldn't tell from the picture, I don't have that much information.
Could you provide circuit diagram on pcb and the electric components which will be used where will be used in diagram
Hello. Please put the pcb and gerber order registration link here.
Is there an easier way to make a levitating device without it being so complicated?
si, existe una manera, en lugar de cuatro electroimanes uno solo, pero es menos estable. También es interesante saber que existen formas aún mas complejas, por ejemplo con microcontroladores hacer amortiguaciones en el movimiento para evitar la vibración, las posibilidades son infinitas.
So basically this is how you create a spaceship more or less
Wakanda for ever 🙏🏿❤️💯💕👑
Thought id do this just by having magnets, this is Tesla operation you got going on man
Can you send me a complete kit with all required components. I mean electronics and the Magnets too
Very good
How much cost is it?
Approx Rs.1000
@@CreativeScience Rs 1000 total complete am i right?
Please tell me what is the application for open the documents
Thanks
Winzip or winrar
How much would it cost (aprox) to replicate what you've done in your video??
Thanks!!
5 billion dollars
Need to order stencil also?
how much weight can the magnet carry. Also how heavy is the bottom section
If you connect the plate with the magnet lower than the levitation point to the electromagnet could u generate lift?
What solder gun do you have? Dose it feed out the tip?
It is electric magnetism it's kid of like those little desk toys you can buy off Amazon
How much time did it take to complete the welding?!
So know-how is that you have 2 coils for X and 2 for Y that being checked with comparators based on Halls sensors are being "pumped" with energy creating a magnetic field that pushes back approaching magnet?
Excellent
Thanks 😊
Are you out of ur mind? If I could do all that do u think I would be looking up a video on anything?
How could i increase the height of levitation ? Id’ like to lift a bulb at least 7 cm higher than a top plane.
It's better to use tl432 shunt regulator for hall element virtual supply. I made this project arround 4 years back with ring magnet. And used HW101D hall element and at output stage uses only 1 lm324 ic , total component count is 20 including ic and all passive components.
hi puri where did you buy the material to assembly ?
can you share your project? much appreciate
Kit is available. Contact whatsapp +919988800161
Hi bro
Thanks for sharing us with your project
I have a little problem when buying the components:
Is the “222pF” in the DIAGRAM means 2200pF as I didn't find 222pF capacitor in the market.
Yeh, You are right you can use 2200pF or 2.2nF or 0.0022uF
@@CreativeScience Thank you bro😁
No thanks bro 😎
hi bro plz send me DIAGRAM
@@风痰 can i have your BOM? much appreciate
What’s the cost of the project
I want to make a magnetically levitating throne. Like Thanos had..
What is the circuit is that sir.circle form & it so litle.
From where you are buying this components
Hall sensors, all magnets and coils bought from china
How much for all of this
Approx Rs.1000-1100
How much is the maximum weight cant handle
Great work!
Thanks bro 🤗
can you tell me from where did you buy the components?
Hello, Could you tell me what type of registers and capacitors size you use, please? 0402 or 0603 or 0805
Can you give me the pcb layout for levitation devices
This is out of the syllabus for me 😅
Est-ce que c'est possible d'obtenir des cartes électroniques assemblées ?
Does anyone know what those copper wire rolls are
Would this work if I wanted a figure to float? Is there a way to levitate without having to use the big disc?
Maybe you could make a cool base for the figure that you could obscure the magnet with, or you could implement the magnet into the inside of the figure.
Very nice installing♥️🙏
I saw the video impressed.
Can I know the model number or place of purchase of the parts shown on the diagram and silk button?
any way to not have 30+ dollars for shipping
Sweet!
❤️
Wow criative science How to make magnetic
But your work is great.
Like it!🤩🤩
Yay! Thank you!
@@CreativeScience remember me sir im the one who asked for hex code for 8 channel ir . thanks ive submitted my final project.
Thanks, you are awesome ❤️
Micro MAG-LEV Audio ML1. 😉
😳
Weight capacity ???
400gm
I m sorry, can you make it more powerful then it ?
Yes
@@CreativeScience How can we make it 1kg?
How can we get it to stay higher?
It's a great channel but the fact there are very few responses after so much work having being put into the creation and quality of the videos is very sad. All that time creating, recording and editing only to ignore the responses.
Great work, shoddy communication.
Your Watching this because of Baby Yoda Floating on a pram and you want to make one yourself!
Can i have the bom? much appreciate!
Awesome 😮😮😮
Thanks 😊
Good Job✌️👌
Thanks 😊
8:53 what is on your wrist
Left or right wrist? 😂
ua-cam.com/video/A6sG5UPARlY/v-deo.html
He is a indian 😀... Guess how I know this...
Yeh, Skin Colour 😅😜
@@CreativeScience No the steel bracelet on your hand👍
Oh My God! You Are Very Genius ❤️
@@CreativeScience By the way just curious to know where are you now?
I am from Kolkata and where are you from?
Great
Thanks 😊
liste of components
anti gravity mickey mouse
great work
Thanks 😊
Wow nice.😍😍
Thanks 🤗
Please can you tell me the name of electronic parts and show all connection by making another video
Thanks in advance
Good👍
Bhai aapka trailer ka music ka title Kiya hai
plz give me this project 😅 ...
😂👌🏻
@@CreativeScience 😅😅😅😅
@@deepchakraborty9420 plz give me too
Good 👍
🤭
টুম্পা 😊
jast osm 😍
Thanks 😊
Super bro
thanks bro
Rambu udara🌓💡
Hello bro
This person said he can make a one pole magnet
In order to proceed with engineering designs and optimizations, there is an engineering fee of $350.00. If you wish to proceed please let me know so we can make the arrangements to receive payment and so I can let our engineering and production staff.
If anyone wants hes s professional company
And it wouldn't use a plug
Too complicated
😶
Excellent Music
😍😍
thanks @Saptarshi Sikder
Wow
Ugh clean your tip
Looking Amazing but behind this video deeep struggle (very deep)
Thanks, only you can understand this 😢❤️
@@CreativeScience
Yup bcz I'm pcb designer
Happy to know that you are PCB designer ☺️👍
@@CreativeScience
Thank you And u will get success 😊
We are all with u & I saw your all video bcz your videos amazed mee
Coo and I have been
gd
Thanks 😊