How To Replace A 2001 Toyota Rav4 Center Dash Light
Вставка
- Опубліковано 23 лис 2019
- THANKS FOR WATCHING!
Please drop a Like, Comment, and Subscribe.
Check Out My Channel
/ @snipeoff
The lights in the temp control panel on my 2001 Toyota Rav4 burned out recently and this is how i fixed it, wasn't able to find the right bulbs but I made it work.
(Disclaimer)
I am not responsible for any issues you may encounter while following this video, ATTEMPT AT YOUR OWN RISK. - Навчання та стиль
Thank you so much for this video. It made my bulb replacement eady.
I did make a mistake by disconnecting both push-pull cables from the panel. The most difficult part of my job was pushing the cable jackets back into their retainment bracket. The force required must have been over 50 pounds. Eventually, I disconnected the cable from the mixer plenum to ease the job. After that was finally done, the range of travel for temperature was full cold to medium. But adjusting the cable in the clip fixed that.
Nice to have the panel properly illuminated.
Very helpful video. My A/C switch was broken so had to replace the whole temperature control unit. Was tentative about prying panels off until I saw how they came off in the video. Showing how to disconnect the heater cables was a big help as well. Thanks.
An excellent effort Comrade from a 2003 RAV4 Owner in the UK.
Very helpful as My console heater bulbs have gone out!!
Very helpful video 👍 Many thanks from Rav4 2003 owner ❤️
Very detailed and helpful. Thank you
Muchas gracias, me ayudo mucho tu video.
That phone holder is boss 🙌🏽. How do I find anything like it?
It was actually a custom 3D print I made
I have a 03' Rav4 and I been wanting to change that orange cluster color to a white or blue. Could you make a video on how to change the cluster bulbs and the process?
Hey, are the cluster bulbs the same size?
Do you have a video on replacing the lights on the instrument cluster as well? I haven't been able to find a video on this, and in a forum I read, they were saying the lights were LED's and permanently soldered in place. I was hoping to replace the lights with something brighter, but maybe that's not possible?
Unfortunately I haven't taken that apart I don't have any info for ya...but they could possibly be soldered in, although I would find it hard to believe they would make you solder or replace the whole cluster just for a possible burned out bulb
Okay. Well, thanks for the reply!
@snipeoff, 1) does it have to buy different colours? stock ones has some red and some blue for the thermometer. 2) about the size you mentioned, T5 is too big, so next size down is T4.2, will it work? or may have to go down to T3? awaits your information. 3) can u measure diamter of the base ? the black colour plastic. Thank you.
Don't have the car anymore unfortunately, you don't have to buy different colors, the colors are in the face plate of the controls, 4.2 may work, I wish I knew for sure
So... I watched this because the cooler switch knob on my 2001 Toyota Rav4 needs to be replaced and I was hoping to get an idea of how to replace it since I can't really find much online about my car... Since you said you've messed with stuff in there before do you know if I would have to take the whole assembly apart to replace just the exterior A/C knob/button or can I just pop it out without taking the dash apart? To give you an idea of what it's doing... the A/C works just fine but the button will randomly pop out if I hit a bump or something causing the A/C to turn off and it takes some finagle-ing to get it to stay pushed in again.
So I had to review my footage, as I no longer have the car unfortunately. But if you looks at the point where I have the buttons off starting at 4:30, you can she where the button should clip on it's the green little switch top left corner. Also watch starting at 9:00 and look where I'm describing how the buttons clip in including the part I mention the flasher button. I think your issue might be that the AC button is not clipping on completely to the micro switch. Or the clips on the switch or button are broken. Unfortunately I don't remember if you can get the buttons back in properly without removing the panel. I hope this helps, let me know
@@Snipeoff I had watched those parts pretty carefully... but my mechanic is pretty sure it's the exterior knob that needs to be replaced so I wasn't sure if maybe I could get away with not having to take it apart. I'll figure it out. This at least gave me the confidence that I won't destroy anything if I have to take it apart. I appreciate you responding so quickly.
Of course no problem, good luck!
Are you able to dim the light since you added the led ones?
I think they still dim fine yeah
Hello, are those t4 or t4.2 bulbs and how much do i need for everything(including the clock) ?
I counted about 6 :)
And thanks for the video, it helped me a lot.
Hello, so I ordered T5 bulbs...but like in the video those aren't the proper size...I really don't know for sure what is the right size though. I hope that helps
@@Snipeoff So shall go smaller than T5?
@@stevechen1638 I would try smaller yes, I unfortunately I don't have the car anymore, so I can't verify the exact size, I do know the T5 was too big though
Had luck with T4.2, although I had to trim abit so I had enough room to twist and lock the bulbs into the circuit board
What size bulbs are those?
55900B BULB, AIR CONDITIONER CONTROL
90010-05114 14V 1.12W, W(CAP), TYPE A:REFER TO ILLUSTRATION 3 € 3.85
90010-05128 14V 0.91W, TYPE B:REFER TO ILLUSTRATION 5 € 5.29
90010-05129 14V 0.91W, TYPE C:REFER TO ILLUSTRATION 1 € 5.29
HOPE " www.toyodiy.com/parts/p_E_200311_TOYOTA_RAV4_ACA21L-AWMNKW_8715.html " IS OK
Does it dim?
Yes I do believe they dimmed, it's been awhile now 😂
where is the link for the bulbs
I just checked and looks like the ones I bought were taken down. But like I explained in the video, the T5 bulbs I ordered aren't the right size
Did it and got all the LEDs working, but now my AC switch won’t work and it only blows hot air 💀💀💀 anyone else ever have this happen?
Double check that the temp control knob is installed right and that cable is attached at both ends. More than likely it's not and stuck on hot. Not sure about the AC switch itself...let me look at a couple things. I would check if the AC button properly engaged into the micro switch
Let me know if that helps
@@Snipeoff I’m pretty sure the AC switch is engaging but it’s weird, I’ll click it and it’ll light up when I first turn on the car but not actually do anything, then 5 minutes later not even light up. My all blue dash look sick tho so worth
Thank you so much for this video. It made my bulb replacement eady.
I did make a mistake by disconnecting both push-pull cables from the panel. The most difficult part of my job was pushing the cable jackets back into their retainment bracket. The force required must have been over 50 pounds. Eventually, I disconnected the cable from the mixer plenum to ease the job. After that was finally done, the range of travel for temperature was full cold to medium. But adjusting the cable in the clip fixed that.
Nice to have the panel properly illuminated.