GD&T Circularity Symbol (unexpected results)

Circularity is often described as the round version of straightness, in that it only measures a single cross section at a time.
Circularity specifies a circular TZ, or a TZ framed by two concentric circles. For instance, every cross section of this pin would need to fit inside the .3mm TZ.
However, there are two important limitations of circularity as a control. The first is that circularity measures how round something is, not what size it is. If a feature, like a pin, needs to be round to .08mm it can pass inspection at almost any size.
A straight pin could still have waves like this in it and meet tight circularity tolerances. This wide section is within a .08mm circularity TZ, and this narrow section is as well, thought the second TZ has a smaller diameter.
The second limitation is that circularity, as a form control, is measuring the roundness of a cross section, not in relation to anything else. This means your cylinder could have been terribly assembled like a stack of discs, and still pass inspection. Each cross section of this strange pin is circular to spec, even though this pin clearly does not look like the intended drawing.
Circularity can be useful for non-cylindrical parts that still need to be round. A cone or a handle for a garden tool would each have a series of cross sections that needed to be round, but not necessarily the same size.
A special use of circularity is calling out the circularity of a sphere, such as a ball bearing. In this case the cross-section plane spins around the center of the sphere and does not stay perpendicular to an axis. For each cross-section measured this way the surface points must fall within a circular TZ.
About us -
i GET IT provides online self-paced training for engineers that is a better way to take training and share knowledge. i GET IT provides the largest library of online training and tutorials for the leading design software like AutoCAD, Autodesk Inventor, Fusion 360, NX, CATIA V5, 3DEXPERIENCE, Teamcenter, PTC Creo and SOLIDWORKS and additional topics based on the manufacturing industry. i GET IT also enables you to publish your own training content to share knowledge within your organization as a complete learning management system.
Visit the i GET IT website at www.myigetit.com for more information.
About i GET IT Platform - • A Look at i GET IT Lea...
Why choose i GET IT Learning? - • Why choose i GET IT Le...
_____________________________________________________
Explore the Playlists to learn -
GD&T - • Geometric Dimensioning...
3DEXPERIENCE - • 3DEXPERIENCE - CATIA
Solidworks - • SOLIDWORKS
PTC Creo - • PTC Creo
________________________________________________________
For Daily Technical Updates, follow us -
Tech Blogs - plmtechtalk.com/
Facebook Page - / myigetit
LinkedIn Account - / i-get-it
Twitter Handle - / myigetit
________________________________________________________
For training and certification or for any query, please write us back support.myigetit.com/hc/en-us...

[@saurabhroy7100]

Give a practical example. like take a assembly of pin and hole and then show if we do not control the circularity then what will be problem... something like that....tons of simple demonstrate videos are present in UA-cam.

[@MrKadvaga]

Annoying pop-up links block the graphics towards the end of the video.

[@myigetit]

Fixed It !Thanks 👍 for pointing it out.

[@MrKadvaga]

@@myigetit sweet, thanks!