I like that this was one of the only teardowns that showed how to get to the left and right analog sticks without having to remove as many components as the other teardown videos currently on UA-cam.
This is good that I don't need to remove the plate as my problem is on the left stick(right when flipped over). The right stick is fine(for now). I can't really tell if the problem is the stick or not as the problem isn't drifting but registering.
If you are following this video, please disconnect the battery ASAP. When poking and prodding around with a metal tool such as tweezers you risk bridging connections and frying your fancy piece of hardware.
I know transparent shells are popular, but if you guys made pastel or other brightly colored solid shells for the switch lite, it would be really cool.
I replaced a left daughter board, it works fine but the volume/on/off buttons aren't working. There doesn't seem to be anything for the switches to connect to. Are there switches under the buttons?
Thanks this helps so much I have a blacklight issue and I couldn’t get the backplate off and this just told my what the 4 screws were on the back and if you could please direct me in a good place that have a video on how to fix blacklight for noobs
As I remember the blacklight is on the touch screen part, and you can easily apart the touch screen from the LCD, and what you need to do is buy a new touch screen and replace it to the stock LCD
I’m trying to replace my switch lite digitizer. How do I go about removing the digitizer from the stock switch lite to replace it with a new digitizer?
I really want to hydrodip my switch lite (front and back) but I don't know if I can do that anymore because there's so much precision and memory involved with disassembly that I don't think I have.
Takes photos during you to disassemble the console to help you remember the parts they should put back. It's not difficult as you thought if you do enough remarks. But for sure it's not easy either. Good Luck!!
You need the suction cup to do it. Place it on the one side of the screen front, and then pull it slowly and gently, and then do it on the other side. And you have to heat the screen up before you do this.
How exactly can you replace the lcd screen? I'm going to try replacing it myself in a few weeks after the lcd screen i ordered is shipped, but i haven't exactly found videos of people replacing the lcd on a switch lite, only on the normal switch, the process must be similar i know, but is there any difference i should know?, since i only want to replace the lcd and not the digitlzer I've heard that the digitizer and lcd screen are glued together unlike the normal switch, and not gonna lie, i'm kinda scared to fuck it up, since this is going to be my first ever disassembly of a console Cheers and great video
We've tried to take apart the digitizer from the LCD, it's not difficult. It's just sticker to hold them together. But you have to do it carefully and slowly. Wish you GOOD LUCK!!
The inner LCD screen of my switch lite was broken (outer glass and touch are intact), and I bought a new LCD screen for switch lite shipped from China, do you think I can fix that myself using your video? many thanks!!
If the LED screen works, then you have to disassemble your switch lite carefully and remember the position of all the screws, and then re-assemble them carefully. Just do it slowly and carefully, and gently. Good luck!!
Quick question, I know the analog sticks are the same size and connector as the ones in the joycons, so that should be easy enough to switch with joycon parts for better aesthetics, but do you know if the buttons are replaceable with the the joycon buttons/ the button replacement sets you guys sell for joycons?
Great product but this video is pretty bad you always want to take the shielding off first and then get to the battery to disconnect it before you work on anything else
H E L P ME P L E A S E brother i tried tear down and reassembled it with new analog stick for right side but when i was done the screen didnt work but sound worked every thing but i cant see the screen only black light so please help me
Please check the connection of the screen and the mainboard, if it connected correctly but problem still stand, then it may possibly damages with the screen's flex.
I like that this was one of the only teardowns that showed how to get to the left and right analog sticks without having to remove as many components as the other teardown videos currently on UA-cam.
But, right joycon cannot be removed that easy like the left right?? :)
This is good that I don't need to remove the plate as my problem is on the left stick(right when flipped over). The right stick is fine(for now). I can't really tell if the problem is the stick or not as the problem isn't drifting but registering.
If you are following this video, please disconnect the battery ASAP. When poking and prodding around with a metal tool such as tweezers you risk bridging connections and frying your fancy piece of hardware.
Just installed my ExtremeRate gold button kit! Man, that was a ton of screws!
lol that's true
I know transparent shells are popular, but if you guys made pastel or other brightly colored solid shells for the switch lite, it would be really cool.
Thanks for your advice!! In fact we are doing it and it's coming soon!
Instead of music it would have been nice to have you actually say what you were doing step by step
Thanks for your suggestion!
@@ExtremeRate how do you do the screen part too?
What kind of screw driver do you need to do that?
this is so off topic but i love ur hands
oh thanks, but I'm a guy so that sounds a bit weird lol
I replaced a left daughter board, it works fine but the volume/on/off buttons aren't working. There doesn't seem to be anything for the switches to connect to. Are there switches under the buttons?
Thanks this helps so much I have a blacklight issue and I couldn’t get the backplate off and this just told my what the 4 screws were on the back and if you could please direct me in a good place that have a video on how to fix blacklight for noobs
As I remember the blacklight is on the touch screen part, and you can easily apart the touch screen from the LCD, and what you need to do is buy a new touch screen and replace it to the stock LCD
I’m trying to replace my switch lite digitizer. How do I go about removing the digitizer from the stock switch lite to replace it with a new digitizer?
The operation is similar with the Switch, which you can find a lot of videos on UA-cam
would it be worth replacing the thermal putty with a good quality thermal pad?
we never tried but as we know the putty is better than a pad on heat radiation
what is a good putty to use? also a glue for the screen that will stick to the shell?
Imagine an all clear shell. Unfortunately it seem it would be more expensive to have a replacement shell.
more expensive than what?
I really want to hydrodip my switch lite (front and back) but I don't know if I can do that anymore because there's so much precision and memory involved with disassembly that I don't think I have.
Takes photos during you to disassemble the console to help you remember the parts they should put back. It's not difficult as you thought if you do enough remarks. But for sure it's not easy either. Good Luck!!
How do i take it out,like where will it come out from
You need the suction cup to do it. Place it on the one side of the screen front, and then pull it slowly and gently, and then do it on the other side. And you have to heat the screen up before you do this.
How exactly can you replace the lcd screen?
I'm going to try replacing it myself in a few weeks after the lcd screen i ordered is shipped, but i haven't exactly found videos of people replacing the lcd on a switch lite, only on the normal switch, the process must be similar i know, but is there any difference i should know?, since i only want to replace the lcd and not the digitlzer
I've heard that the digitizer and lcd screen are glued together unlike the normal switch, and not gonna lie, i'm kinda scared to fuck it up, since this is going to be my first ever disassembly of a console
Cheers and great video
We've tried to take apart the digitizer from the LCD, it's not difficult. It's just sticker to hold them together. But you have to do it carefully and slowly. Wish you GOOD LUCK!!
@@ExtremeRate thank u so much for the reply!!
Do you have any plans to make a housing shell for Nintendo Switch Lite? How long do you think it will take if you have a plan?
Every thing is on their ways, please stay tuned!
@@ExtremeRate any updates on release ? just got into it and atomic purple would be fire
@@tilschweitzer8964 Hopefully in the spring of 2020, please stay tuned!
The inner LCD screen of my switch lite was broken (outer glass and touch are intact), and I bought a new LCD screen for switch lite shipped from China, do you think I can fix that myself using your video? many thanks!!
If the LED screen works, then you have to disassemble your switch lite carefully and remember the position of all the screws, and then re-assemble them carefully. Just do it slowly and carefully, and gently. Good luck!!
How did the repair go?
@@EroticNapkin bad. I switch was sold on eBay for parts.
the switch
Glad they told us was tools and what stuff was or did major fail
Do you have plans on releasing Nintendo Switch Lite custom housing shells in 2020?
Yes, they are in mass production, please stay tuned!
Quick question, I know the analog sticks are the same size and connector as the ones in the joycons, so that should be easy enough to switch with joycon parts for better aesthetics, but do you know if the buttons are replaceable with the the joycon buttons/ the button replacement sets you guys sell for joycons?
No, the buttons are not the same. We are working on the Lite buttons, please stay tuned!
@@ExtremeRate great thanks for the update! Any ETA yet or too early to tell/ too much chaos going on rn? Stay safe.
@@akashjaini238 Thank you :) The Lite buttons set is coming out in April.
@@ExtremeRate great, is that around the same time as you'll be making shells for the lite too?
@@akashjaini238 Yes!
What's the name of the background music?
It's called annoying shit music that I'm amazed anyone would want to listen to #45
It definitely has Alan Watts talking in some of if
Do ribbon cables tear easily?
Yes, so you have to do it extremely carefully and gently.
What happens if some of the screws are stripped?
Nothing you can do
Great product but this video is pretty bad you always want to take the shielding off first and then get to the battery to disconnect it before you work on anything else
Will you be doing a video on how to reassemble the lite?
Yes, very soon, at that time we will bring our custom shells in the video :)
how do you assemble it?
ua-cam.com/video/JHaA0JL6kRs/v-deo.html
Music Name please , thanks
I don’t have a 3 head screw 😢
So does the screen come out ?
You need to use a blow dryer to heat up the screen part and then take out the screen.
@@ExtremeRate Thanks, to put it back on i would assume you use glue ?
@@adam1st- No, the sticker on the back of the screen still works after that.
Thanks heaps
@@adam1st- You are most welcome
How do i take my screen out,its not working
You have to use the hair dryer to heat it up and then pull it out
ExtremeRate what all do i need to take out before i can remove the screen
@@sgtorbital9357 You have to do all the process in this video before you remove the screen
ExtremeRate every single one?
@@sgtorbital9357 Yes
H E L P ME
P L E A S E
brother i tried tear down and reassembled it with new analog stick for right side but when i was done the screen didnt work but sound worked every thing but i cant see the screen only black light so please help me
need it very soon friend
Please check the connection of the screen and the mainboard, if it connected correctly but problem still stand, then it may possibly damages with the screen's flex.
@@ExtremeRate would you please make a video about it to help me
@@dope_s.21i59 We used to have this issue, and we fix it by using a new LCD...
@@ExtremeRate can you send me link
Hey can you answer my comment from a few days ago
Why our reply was gone...
17:25 hi!
Hi from the glasses guy.
😒💢 is still stu name
What do you mean?
@@ExtremeRate is should show up my mailbox
@@deiongreenaway9751 ???
Can someone be more specific & tell me which one unscrews their back plate? & possibly link me to just that one. Can’t find the correct one anywhere
Do you mean you need to know which screwdriver can unscrew the back plate of the switch Lite?
ExtremeRate yes
@@miikastory Y00 screwdriver