MGC Square-1 Setup Tutorial (+ Replacing Caps Easily)

Поділитися
Вставка
  • Опубліковано 20 гру 2024

КОМЕНТАРІ • 148

  • @borislont6918
    @borislont6918 3 роки тому +38

    You can also switch black and white by switching the equator caps and solving the puzzle

    • @gabrielcarlobato3565
      @gabrielcarlobato3565 3 роки тому +5

      Thank you for this amazing comment through Our Lord Jesus Christ In His Holy Name Amen.

    • @winnter5141
      @winnter5141 Рік тому

      what is an equator cap

    • @dyl.scooters
      @dyl.scooters Рік тому

      How do I switch them

    • @josianthelion6918
      @josianthelion6918 Рік тому

      You can take off the caps on the side of the cube where the screw system is and switch their places you might have to flip the caps around to get them in but once they are in you can flip the top and bottom colors of the cube

    • @dyl.scooters
      @dyl.scooters Рік тому

      @@josianthelion6918 I have tried that but black is still on the bottom

  • @NKcubing
    @NKcubing Рік тому +4

    Hello! thank you for the great tutorial!
    I already knew how to switch edges because I unboxed with a friend of mine his sq-1, but I didnt knew how to swith corners. Thank you for great video!

  • @zeeerux
    @zeeerux 3 роки тому +18

    thanks for the tutorial! I was worried that I wouldn't be able to set up my squan to my likings, but It really turned out perfect!

    • @gabrielcarlobato3565
      @gabrielcarlobato3565 3 роки тому +3

      Thank you for this amazing comment through Our Lord Jesus Christ In His Holy Name Amen.

  • @ashelcuffaro
    @ashelcuffaro 11 місяців тому +1

    Great video! Ordered my square 1 this morning!

  • @superronan7660
    @superronan7660 Рік тому

    Dude the algorithms are going crazy I just bought a Mac square one 2 days ago and I see this

  • @fc3x336
    @fc3x336 3 роки тому +8

    have you tried out a non mag ylm squan, and if so is this a direct upgrade from it?

    • @rudranshbisht2985
      @rudranshbisht2985 2 роки тому

      Ofc yes

    • @sloth9093
      @sloth9093 2 роки тому

      This is a direct upgrade from volt v2 which is a direct upgrade from ylm m

  • @flamingpineappl
    @flamingpineappl Рік тому +1

    Im saving this video cuz i want a mgc squan for christmas! I will need this video later! (Btw good video!)

  • @ΓΙΆΝΝΗΣΤΣΕΡΩΝΗΣ-υ1ψ

    My black side feels normal but the white side feels like a 3x3 with no springs. Is it fixable?

  • @naksh-baman
    @naksh-baman Рік тому +2

    Will cubicle mystic go along well with this cube??

  • @CraterCuber
    @CraterCuber 3 роки тому +19

    Is it just me or is that screwdriver looking kinda thicc... Great video!

    • @latathakre918
      @latathakre918 3 роки тому +2

      Is it me or you have watch the videos of DANI!!!!?

    • @CraterCuber
      @CraterCuber 3 роки тому +1

      @@latathakre918 yes. I am indeed milk gang

    • @stubblycuber2729
      @stubblycuber2729 3 роки тому +1

      @@latathakre918 we dont speak about the drill around these parts

    • @lucas_lb_cube
      @lucas_lb_cube 2 роки тому

      Good. You have passed not talking about the drill.

    • @wrmmaglev6620
      @wrmmaglev6620 2 роки тому

      💀

  • @Square-one123
    @Square-one123 6 місяців тому +1

    Yo this is kinda late but have you tried fz calm or rush on the mgc? If so how did it turn out?

    • @frogcubes
      @frogcubes Місяць тому

      hey, Yeah, fz calm on mgc square 1 is nice

  • @littlebigcubing6062
    @littlebigcubing6062 2 роки тому +2

    I don’t know if anyone else encountered this, but when removing yellow the piece connecting the yellow to the side color broke off into the side piece, I can’t get it out

    • @daefin9993
      @daefin9993 2 роки тому

      this happened to one of my edges too. just break the coresponding piece on the black cap and put it in. it wont come out that easily even without it

  • @parthchhugani8915
    @parthchhugani8915 2 роки тому +1

    Hi Cube master
    I just bought the mgc sqaure-1 and did your set up it's the best set up I have ever tried thanks for that but I
    there is a problem that it strips a lot so can u give some suggestion for stopping the striping issue?

  • @gumballstudios9232
    @gumballstudios9232 2 роки тому

    Thanks so much I did mine on just a yuxin m and it worked out great but I am hoping to gat an mgc

  • @rct2074
    @rct2074 3 роки тому +2

    which is better if you compare with Volt?

    • @kaz8297
      @kaz8297 3 роки тому

      Mgc is worlds better

    • @rct2074
      @rct2074 3 роки тому

      tnx

  • @nicholashurtado3170
    @nicholashurtado3170 3 роки тому +1

    Help!! I was taking off the yellow center caps to put on the black ones and while I was taking them out the piece that connects both center caps broke and now is stuck inside the place it goes!! What do I do to take it out??

    • @suryothepleb6907
      @suryothepleb6907 3 роки тому

      hehe, same happened to me. just use a needle and try to destroy the pice that is stuck inside and try to get the most of it out. eventually i got enough out to put the black piece on. Good luck!

  • @vomancuber6685
    @vomancuber6685 2 роки тому +4

    For me the top and bottom layers are too slow because for some reason they catch a lot on the equator

    • @actuallyD1VN
      @actuallyD1VN Рік тому

      have you fixed it and if yes how? my top and bottom layers are super slow but i dont seem to find the problem

    • @MylesCubes
      @MylesCubes Місяць тому

      @@actuallyD1VNif you still haven't found the answer you can do a bunch of sponges and learn it

  • @kaz8297
    @kaz8297 3 роки тому +1

    Great vid. I wanted to see this vid to see how to switch the caps, since I won’t be setting up my mgc, I decided to get a premium set up one.
    Also, unrelated question, should I get the mystic wrm or the regular 11m duo. Idk which one I like more, as my only other cubes is an old valk m (that I set up, to my knowledge, pretty well) and an rs3m. I like both equally.

    • @CubeMasterYT
      @CubeMasterYT  3 роки тому +4

      I never tried the 11M but the Mystic WRM is pretty good. But I use a budget cube over that one so I'm not really sure which to recommend lol. Maybe check out some reviews or stick with a cheaper cube :)

    • @kaz8297
      @kaz8297 3 роки тому

      @@CubeMasterYT what cube?

    • @NinjaCubed
      @NinjaCubed 3 роки тому

      @@kaz8297 Meilong m

  • @DMcuber1
    @DMcuber1 Рік тому +1

    Is the washer actually useful? i lost it

  • @thetwirl5842
    @thetwirl5842 6 днів тому

    My square ones things that connect the caps broke so im stuck with half yellow half black

  • @hoanganhduc799
    @hoanganhduc799 3 роки тому +1

    Is the MGC square 1 screw stripped easily

    • @birbbraintoo8494
      @birbbraintoo8494 3 роки тому

      lol, yes for me, i took it apart once and then I couldn't put it back together

  • @qwerbycubing
    @qwerbycubing Рік тому

    thanks for the tutorial! however my squan popped one day and when i tried to fix it the screw just stopped turning. i think its because the blue piece isnt turning with the screw. i cant tighten it and i have to have very low tps to solve now, and i really dont want to buy another one. 😕 have any ideas to fix this?

  • @nazar_gasyn_3463
    @nazar_gasyn_3463 3 роки тому +1

    Hi, what do you prefer mgc square-1 or volt v2 full magnetic?

  • @actuallyD1VN
    @actuallyD1VN Рік тому

    I dont know if anyone else has this problem but my top and bottom layers are so slow and really hard to turn. I tried wiping off the lube and putting differrent lube in and loosening the screw but those dont work

  • @pumpkinstutorials2404
    @pumpkinstutorials2404 2 роки тому

    tysm! made it 1000x better

  • @Ismail45
    @Ismail45 3 роки тому +1

    Whats the fastest sq 1 method 🤔

    • @talentedcuber
      @talentedcuber 3 роки тому

      @KB Cubes Yes cuz the Lin is good if you practice it A TON while for CSP you just learn how to trace and a bunch of algs

  • @НиколајЈокић
    @НиколајЈокић 3 роки тому +1

    What is your 3x3 main?

  • @fabianbrowa8179
    @fabianbrowa8179 3 роки тому +1

    Could u make a sub 15 and sub 10 guide for squan?

    • @kaz8297
      @kaz8297 3 роки тому

      I think he already did for sub 10

  • @birbbraintoo8494
    @birbbraintoo8494 3 роки тому

    hello! I was setting up my square-1 but then the screwdriver wore down the screw. So now I have a really loose square 1 that I can't tighten. Have any ideas for what I should do?

    • @CubeMasterYT
      @CubeMasterYT  3 роки тому

      I had a similar issue with my Square-1, think the design isn't the best. I replaced my screw with another cube, but if you don't have one might need to just force it as much as possible.

    • @birbbraintoo8494
      @birbbraintoo8494 3 роки тому

      @@CubeMasterYT ty

  • @ignacytomczak4827
    @ignacytomczak4827 2 роки тому

    I don't know why but I can't make my cube tighter.Because when I trying to set-up cube with screw driver ,screw stay in one place and I can't move it. What to do?

    • @trashton273
      @trashton273 5 місяців тому

      im sure you figured it out due to this being 2 years old but i personally hold the other side of the screw inward then screw it in

  • @a.dhineshbalaji11-b19
    @a.dhineshbalaji11-b19 2 роки тому

    Can we use the black caps of mgc in yuxin little magic...

  • @Imliterallythebatman
    @Imliterallythebatman Рік тому +3

    2,27 I can't unscrew the puzzle for some reason. Does anyone encounter the same problem as i do? Please let me know.

    • @Yoel_Avila
      @Yoel_Avila 10 місяців тому +1

      Me bro, how

    • @ashelcuffaro
      @ashelcuffaro 7 місяців тому

      I can’t unscrew mine either

    • @Yoel_Avila
      @Yoel_Avila 7 місяців тому

      @@ashelcuffaro me neither bro... 2 months later

    • @ashelcuffaro
      @ashelcuffaro 7 місяців тому

      @@Yoel_Avila same. I screw and I screw and it doesn’t make any progress from where it started

    • @Yoel_Avila
      @Yoel_Avila 7 місяців тому

      @@ashelcuffaro samee bro, how tf 😭, i asked some friends and they just say it's easy, "just unscrew hard"

  • @davidcejka253
    @davidcejka253 2 роки тому

    is there any way of lubing without dissasembling?

  • @bigoofersrock
    @bigoofersrock Рік тому

    I'm worried about opening my cube up. Does anyone have advice for how to make it better without opening it, or is that impossible? (also I can't get my caps off to change to black, any tips on that?)

  • @tacodoes
    @tacodoes 2 роки тому

    Is it common for the caps to break? i have 2 or more broken and i did it correctly

    • @ZBPug
      @ZBPug 2 роки тому

      me too, so disappointing

  • @Trstxn
    @Trstxn 2 роки тому

    ty i didnt know how to tighten my square 1 it got super loose

  • @merci8545
    @merci8545 3 роки тому

    my cube was missing some holes so I am going to have to cut off some pieces of plastic on my black pieces if I want to install them. seems like more work than it's worth tho

    • @Jakl_1
      @Jakl_1 3 роки тому

      I thought only my cube was like this

  • @hello-en1gr
    @hello-en1gr 2 роки тому

    would dnm-37 and weight 5 work?

  • @henrybarry4022
    @henrybarry4022 3 роки тому

    Can you switch out the caps on a 3x3 like you did on this?

  • @raynerpo2280
    @raynerpo2280 2 роки тому

    my spring got stripped in my mgc squan anyone knows how to fix it???

  • @DownUnderCuber
    @DownUnderCuber 3 роки тому

    Great video thank you, I just ordered mine half hour ago, looking forward to it.

  • @vomancuber6685
    @vomancuber6685 2 роки тому

    Hey cube master! What can I do with Angstrom dignitas, Angstrom gravitas, DNM-37, comet, and Traxxas 50k? (Since those are the only lubes I have

  • @kscuber5865
    @kscuber5865 3 роки тому +1

    This video is awesome!

  • @KingDizLifts
    @KingDizLifts 3 роки тому

    Still waiting for mine to come in, hopefully it will soon

    • @CubeMasterYT
      @CubeMasterYT  3 роки тому +2

      Yep, I heard there were a few delays but it should hopefully be shipping very soon!

    • @gemgem3280
      @gemgem3280 3 роки тому

      Yeah same. I ordered mine last week and it said it would ship in late may so, soon?

    • @CubeMasterYT
      @CubeMasterYT  3 роки тому +3

      Official release is on May 28th, so hopefully you get it a bit after!

    • @KingDizLifts
      @KingDizLifts 3 роки тому

      @@CubeMasterYT thanks man! I look forward to it

  • @rickytan6650
    @rickytan6650 3 роки тому

    Is this mgc sq1 will be your new main?

    • @CubeMasterYT
      @CubeMasterYT  3 роки тому +1

      Yep! Refer to the video before this one :)

  • @davidepstein7397
    @davidepstein7397 3 роки тому +1

    well i cant set it up cos my edge broke lol!

  • @S1neWav_
    @S1neWav_ 3 роки тому

    thanks man very helpful

  • @DeadShot-wu9ow
    @DeadShot-wu9ow 3 роки тому +1

    I took my square 1 apart and it just Loosens after 10 solves

  • @Jay-sd9ye
    @Jay-sd9ye 2 роки тому

    I'm going to add magnets to top and bottom layers. Mine just spins too easy. I miss aline so much. I enjoy the cube, those top and bottom layers spin to much

  • @Shadowspeed10
    @Shadowspeed10 2 роки тому

    i tried to do the caps but i broke the piece :(

  • @Pandemos
    @Pandemos Рік тому

    "Feels like it's going to break the cube..." breaks the cube. It will sometimes pop the one tiny insert tab piece, making it really likely to fall apart. Take it apart first.

  • @Arcticgdnmore
    @Arcticgdnmore Рік тому

    Why can't I loosen the screw enough so that it disassembles? The screw just gets stuck at one point and doesn't move. Can someone help me?
    Edit: Do not trust cheap Chinese hardware I was using the screwdriver they gave me in the box and it appears it was too shitty to do anything reasonable.

  • @jonahf1181
    @jonahf1181 2 роки тому +1

    I tried to push the edge of exactly like you said, and the post connecting the halves immediately snapped. Thanks a lot.

  • @NalesnikMan
    @NalesnikMan 3 роки тому

    How the hell do i unscrew it?

    • @NalesnikMan
      @NalesnikMan 3 роки тому

      There's this blue plug in the back and i cant even make a single turn with the screw

    • @birbbraintoo8494
      @birbbraintoo8494 3 роки тому

      @@NalesnikMan take the cap from the other side, :)

    • @ashelcuffaro
      @ashelcuffaro 7 місяців тому

      @@birbbraintoo8494bro I did and I can’t get it

  • @bmx540bikeride2
    @bmx540bikeride2 3 роки тому

    Great videos

  • @pietromora238
    @pietromora238 3 роки тому

    Where can I buy the black caps to replace the yellow ones?

  • @NinjaCubed
    @NinjaCubed 3 роки тому +1

    Thanks! :D

  • @Supreme_transport
    @Supreme_transport Місяць тому

    2:33

  • @hopeandtruth6108
    @hopeandtruth6108 Рік тому

    My mgc came white top

  • @kccubing7649
    @kccubing7649 2 роки тому

    why do people like using black one square one

  • @putian_ye
    @putian_ye 2 роки тому

    lifesaver, thx so much

  • @jontar5970
    @jontar5970 3 роки тому

    You use quite a lot but it’s good

  • @colecrosby4631
    @colecrosby4631 3 роки тому +1

    Can you please make a video on how to assemble a square-1?

  • @faisalbahri7904
    @faisalbahri7904 3 роки тому

    How to unscrew?

  • @Sandw1chTurtle
    @Sandw1chTurtle 6 місяців тому

    these caps do not want to go up bro

  • @tomb2577
    @tomb2577 2 роки тому

    wow.

  • @biglukegolem
    @biglukegolem 3 роки тому

    Never gonna switch caps again. Multiple plastic sticks broke off and stayed in the holes.

    • @tranken587
      @tranken587 3 роки тому

      same, but it doesn't make the cube perform worse so im good with it

  • @bmx540bikeride2
    @bmx540bikeride2 3 роки тому

    Hi

  • @wanniesup
    @wanniesup 6 місяців тому

    jesus loves us all ty

  • @acrat075
    @acrat075 Місяць тому

    My d layer is faster than my u lauer

    • @Supreme_transport
      @Supreme_transport Місяць тому

      Loosen the U layer or tighten the D layer

    • @acrat075
      @acrat075 Місяць тому

      Thats not* how it works on a square 1

    • @Supreme_transport
      @Supreme_transport Місяць тому

      @@acrat075 yea i didn’t know bc i don’t actually have a sq1

    • @Supreme_transport
      @Supreme_transport Місяць тому

      @@acrat075 also I recommend you should focus on typing

    • @Supreme_transport
      @Supreme_transport Місяць тому

      @@acrat075 bc u got a few typos

  • @gabrielcarlobato3565
    @gabrielcarlobato3565 3 роки тому +2

    Thank you for this amazing video through Our Lord Jesus Christ In His Holy Name Amen.