It really doesn't work anymore for bridged network to date. If anyone want to still have network in unlocked MacOS under VMWare Workstation (or Palyer) it is necessary to configure as NAT. I made it work in such manner, after spending an entire afternoon trying for 4 different VMs for other 4 different iterations of MacOS (Mojave, Big Sur, Ventura and Monterey) the most common troubleshooting solutions, finally coming to the sad NAT solution...
@@dmytrobashlyk5905 you mean the video is useful because now VMware Workstation and Player work with the (my) suggested NAT trick, or because it started to work again with other network configurations?
Hi again do you have a fix to install VMWare tools after installing MacOS Ventura, I keep getting directed to Broadcom and have no idea what to do, Many Thanks
Welcome Jeff. You can follow the below video to install VMware tools: How to Make macOS 13 Ventura Full Screen in VMware Player | Fix Screen Scaling in macOS 13 Ventura ua-cam.com/video/WQdGIRFL8qw/v-deo.html
thanks for the video, I have a question. how come your Ventura system runs so smooth? I have good hardware but when I run Ventura full screen it slows down.
@@tanzTalkstech i7 laptop with 3080 graphics card , 32gb RAM . I am pretty sure there is some setting i must have done wrong. do you have a guide to Install Venutra, or if u can show your VMware settings. Also, i notice u are using workstaton but i am only using player, whould that matter?. thanks.
I’m also using VMware Player. You can go through my video for detailed guide: Install macOS 13 Ventura in VMware Workstation Player ua-cam.com/video/CeSqdrf1WOg/v-deo.html And lastly, I do some video editing to remove delays in processing to make video shorter. But my Ventura works well.
@@tanzTalkstech thanks, I thought of you doing some video editing, getting rid of jitter. nice. I actually watched your video guide of installing Ventura. I installed it before , I was checking is u did something different. I was missing SMC="0" and eth settings . but apart from that no issues.
my system is very slow but ive intel i5 12500k, rtx3070, 32gb ram.. how can i make it faster.. when i want change cores up to 6 from 4 the system dont start
Did you try allocating 5 cores? 6 will be more than 50% of the total cores available with the host PC. I tried with 6 cores on my PC and it works perfectly well but my PC has 12 cores also.
Different PCs behave differently bro. Since Apple keeps a close control over the hardware in their MacBook, not a lot of modifications are effective for VMs.
For the Bluetooth and Wifi, you can use USB Wifi and USB Bluetooth. Those devices get detected in the VM. But I’m afraid Airdrop doesn’t work well. It uses your network connection for exchanging data among the devices which defeats the whole purpose of using Airdrop.
Can you please check if you have written ethernet0.virtualDev = “vmxnet3” and that NAT has been selected under Network adapters for the said Virtual Machine.
Before the vmxnet3 entry... did you manually edit the network settings from within the running macOS in vmware? - That's what I had done when the internet did not work. - After changing the entry to ethernet0.virtualDev = “vmxnet3" I also had to change back the network settings in the running system to its default (I had manually assigned an IP address, this needed to be reversed).
Please hit 👍Like Button and Subscribe to the channel to Support me 🙏
can u please do a video of how to fix lagging macos ventrua please i suscribe and like !"
Oh sure ✔️ I will do that soon
Worked perfectly. Thank you. I tried everything and wish I found this first. Would have saved me days.
Glad I could help
Well, the modification of the .vmx file fixed too my network problem on my new VMware macOS Ventura VM. Many thanks to you !!!
You're welcome! 😊
Where can I find the configuration file the virtual machine for windows?
It really doesn't work anymore for bridged network to date.
If anyone want to still have network in unlocked MacOS under VMWare Workstation (or Palyer) it is necessary to configure as NAT.
I made it work in such manner, after spending an entire afternoon trying for 4 different VMs for other 4 different iterations of MacOS (Mojave, Big Sur, Ventura and Monterey) the most common troubleshooting solutions, finally coming to the sad NAT solution...
yes, it's works. the video is useful only with this comment)
@@dmytrobashlyk5905 you mean the video is useful because now VMware Workstation and Player work with the (my) suggested NAT trick, or because it started to work again with other network configurations?
Thank you for manual! It's works mac os 13x vmware 16.2 pro
Most welcome 🤗
thanks a lot, editing the file worked perfectly!
Glad it helped! 😊
Internet Upload Speed is very slow, even setting after vmxnet3. What is the solution? Any idea?
Hi again do you have a fix to install VMWare tools after installing MacOS Ventura, I keep getting directed to Broadcom and have no idea what to do, Many Thanks
drive.google.com/drive/folders/1rkYjp5VTSD1gRL-AwxOXDCNqohsEYsgg?usp=sharing
Thanks by the help friend!
Happy to help!
thank you very much i suscribed and it worked
Thanks, man, it worked.
Welcome mate 😊
Thanks worked for me !! 👌👌
Prachtige video's.👌👌
Funcionou! Muito bom!
Welcome 😊
how do you do this for 10.15 catalina?
This worked for me thanks!
Welcome 🤗
Worked great! Thank you! Do you know the trick to getting VMWare Tools to install?
Welcome Jeff. You can follow the below video to install VMware tools:
How to Make macOS 13 Ventura Full Screen in VMware Player | Fix Screen Scaling in macOS 13 Ventura
ua-cam.com/video/WQdGIRFL8qw/v-deo.html
@@tanzTalkstech Thanks, Tanzeel! Worked like a charm!
It worked for me thanks mate
Welcome mate 😊
Thanks a lot. Subbed.
Welcome!
Thank you so much. It worked
You're welcome!
but there is already e1000e in that file
I have Ethernet connection, but no Wi-Fi connection to have location, any tip of how to enable it?
It worked for me thanks a lot!
You're welcome! 😊
It worked! thanks
Welcome! Don’t forget to give a like 👍 😊
You just earned a sub
😊
What about macOS x tiger 10.4
The method that I have showed in the video worked for you?
Very nice, thanks.
thanks for the video, I have a question. how come your Ventura system runs so smooth? I have good hardware but when I run Ventura full screen it slows down.
What are the specifications of your pc?
I’ll take that as a compliment 😅
@@tanzTalkstech i7 laptop with 3080 graphics card , 32gb RAM . I am pretty sure there is some setting i must have done wrong. do you have a guide to Install Venutra, or if u can show your VMware settings.
Also, i notice u are using workstaton but i am only using player, whould that matter?.
thanks.
I’m also using VMware Player. You can go through my video for detailed guide:
Install macOS 13 Ventura in VMware Workstation Player
ua-cam.com/video/CeSqdrf1WOg/v-deo.html
And lastly, I do some video editing to remove delays in processing to make video shorter. But my Ventura works well.
@@tanzTalkstech thanks, I thought of you doing some video editing, getting rid of jitter. nice. I actually watched your video guide of installing Ventura. I installed it before , I was checking is u did something different. I was missing SMC="0" and eth settings . but apart from that no issues.
How do i open Player Window?
i work is sow me is connect but i want o check is work and is won't work
I didn’t get you David
Thank you very very much
Welcome 🤗
Hello can u help me, it doesn't work to me
my system is very slow but ive intel i5 12500k, rtx3070, 32gb ram.. how can i make it faster.. when i want change cores up to 6 from 4 the system dont start
How many cores your i5 processor has?
@@tanzTalkstech 10
Did you try allocating 5 cores? 6 will be more than 50% of the total cores available with the host PC.
I tried with 6 cores on my PC and it works perfectly well but my PC has 12 cores also.
@@tanzTalkstech it dont boot with more then 4 cores
Different PCs behave differently bro. Since Apple keeps a close control over the hardware in their MacBook, not a lot of modifications are effective for VMs.
Hey Thank You, it's worked well for me.
Is there any way to "Airdrop" working in virtual machine?
For the Bluetooth and Wifi, you can use USB Wifi and USB Bluetooth. Those devices get detected in the VM. But I’m afraid Airdrop doesn’t work well. It uses your network connection for exchanging data among the devices which defeats the whole purpose of using Airdrop.
This doesn't work, it keeps reverting back to e100e
Maybe the changes are not getting saved
i choose my physical nic and it works
Not working on macOS 12 Monetery
Have you solved it I can’t seem to figure it out
many thanks.
This did not work for me
Life is so unfair bro ☹️
I have tried to fix the connection problem 3 times. I have reinstalled (3 times) all the files and still doesn't work. Can you help me please :(
Can you please share your .vmx file?
@@tanzTalkstech .encoding = "windows-1252"
config.version = "8"
virtualHW.version = "19"
pciBridge0.present = "TRUE"
pciBridge4.present = "TRUE"
pciBridge4.virtualDev = "pcieRootPort"
pciBridge4.functions = "8"
pciBridge5.present = "TRUE"
pciBridge5.virtualDev = "pcieRootPort"
pciBridge5.functions = "8"
pciBridge6.present = "TRUE"
pciBridge6.virtualDev = "pcieRootPort"
pciBridge6.functions = "8"
pciBridge7.present = "TRUE"
pciBridge7.virtualDev = "pcieRootPort"
pciBridge7.functions = "8"
vmci0.present = "TRUE"
hpet0.present = "TRUE"
nvram = "macOS 13 Ventura.nvram"
virtualHW.productCompatibility = "hosted"
gui.exitOnCLIHLT = "FALSE"
powerType.powerOff = "soft"
powerType.powerOn = "soft"
powerType.suspend = "soft"
powerType.reset = "soft"
displayName = "macOS 13 Ventura"
usb.vbluetooth.startConnected = "TRUE"
smc.present = "TRUE"
smbios.restrictSerialCharset = "TRUE"
firmware = "efi"
guestOS = "darwin22-64"
board-id.reflectHost = "TRUE"
ich7m.present = "TRUE"
tools.syncTime = "FALSE"
sound.autoDetect = "TRUE"
sound.virtualDev = "hdaudio"
sound.fileName = "-1"
sound.present = "TRUE"
numvcpus = "4"
cpuid.coresPerSocket = "4"
memsize = "6656"
sata0.present = "TRUE"
sata0:0.fileName = "macOS 13 Ventura.vmdk"
sata0:0.present = "TRUE"
sata0:1.deviceType = "cdrom-image"
sata0:1.fileName = "VMware-Tools-darwin-12.0.5-19716617\vmtools\darwin.iso"
sata0:1.present = "TRUE"
usb.present = "TRUE"
ehci.present = "TRUE"
usb_xhci.present = "TRUE"
ethernet0.connectionType = "nat"
ethernet0.addressType = "generated"
ethernet0.virtualDev = "vmxnet3"
ethernet0.present = "TRUE"
extendedConfigFile = "macOS 13 Ventura.vmxf"
floppy0.present = "FALSE"
smc.version="0"
numa.autosize.cookie = "40042"
numa.autosize.vcpu.maxPerVirtualNode = "4"
uuid.bios = "56 4d 5e fe 23 c0 28 bd-f0 a0 0b e8 27 59 8f 48"
uuid.location = "56 4d 5e fe 23 c0 28 bd-f0 a0 0b e8 27 59 8f 48"
sata0:0.redo = ""
pciBridge0.pciSlotNumber = "17"
pciBridge4.pciSlotNumber = "21"
pciBridge5.pciSlotNumber = "22"
pciBridge6.pciSlotNumber = "23"
pciBridge7.pciSlotNumber = "24"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "160"
sound.pciSlotNumber = "33"
ehci.pciSlotNumber = "34"
usb_xhci.pciSlotNumber = "192"
sata0.pciSlotNumber = "35"
svga.vramSize = "268435456"
vmotion.checkpointFBSize = "134217728"
vmotion.checkpointSVGAPrimarySize = "268435456"
vmotion.svga.mobMaxSize = "268435456"
vmotion.svga.graphicsMemoryKB = "262144"
ethernet0.generatedAddress = "00:0c:29:59:8f:48"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "-1833349726"
monitor.phys_bits_used = "45"
cleanShutdown = "TRUE"
softPowerOff = "TRUE"
usb_xhci:6.speed = "2"
usb_xhci:6.present = "TRUE"
usb_xhci:6.deviceType = "hub"
usb_xhci:6.port = "6"
usb_xhci:6.parent = "-1"
usb_xhci:7.speed = "4"
usb_xhci:7.present = "TRUE"
usb_xhci:7.deviceType = "hub"
usb_xhci:7.port = "7"
usb_xhci:7.parent = "-1"
usb:1.speed = "2"
usb:1.present = "TRUE"
usb:1.deviceType = "hub"
usb:1.port = "1"
usb:1.parent = "-1"
toolsInstallManager.updateCounter = "15"
gui.lastPoweredViewMode = "fullscreen"
tools.upgrade.policy = "useGlobal"
guestInfo.detailed.data = "architecture='X86' bitness='64' buildNumber='22A5266r' distroName='macOS' distroVersion='13.0' familyName='Darwin' kernelVersion='22.0.0'"
usb_xhci:4.present = "TRUE"
usb_xhci:4.deviceType = "hid"
usb_xhci:4.port = "4"
usb_xhci:4.parent = "-1"
Thanks!!
Teşekkürler🙏🏻
thank you...
Welcome!
ventura broken for amd users
Sorry to hear bro. I don’t have access to any AMD based computer so I don’t have much idea about AMD workarounds.
I have followed your tutorial to fix no Internet Connection in macOS 13 Ventura in VMware Player on Windows 11 but still not work for me.
Can you please check if you have written ethernet0.virtualDev = “vmxnet3” and that NAT has been selected under Network adapters for the said Virtual Machine.
@@tanzTalkstech Yes it's do but still not work
Did you get this working onWindows 11? I’m having the same issue, “vmxnet3” doesn’t fix this.
You save me bro!
Welcome 🤗
thanks
Welcome 🤗
solved my issue 🙂
thanks =)
Welcome!
👌👌👌👌
Work
Your tutorial to fix no Internet Connection in macOS 13 Ventura in VMware Player on Windows 11 simply d'ont work.
Sorry to hear that. If you somehow manage to fix it, please let us know the steps too.
Before the vmxnet3 entry... did you manually edit the network settings from within the running macOS in vmware? - That's what I had done when the internet did not work. - After changing the entry to ethernet0.virtualDev = “vmxnet3" I also had to change back the network settings in the running system to its default (I had manually assigned an IP address, this needed to be reversed).
thanks