My question is that unless you were involved in the engineering of the vessel how exactly can you tell the internal design just by walking up to the equipment?
Great information. Would like to see more videos on various pieces of equipment throughout Refineries. Stripper Columns, Reactors, Splitters, Compressors, ETC. ETC...
Hello, I have a small question, How would we know for sure that all the gas bubbles inside the feed escapes in the Gas section ? if any gas bubbles fall down into the liquid, does it have enough time to separate itself ?
All “free” gas will be separated if the separator is operating within its design parameter’s. However, any small gas bubbles, or dissolved gas that’s go through the water or oil legs will be removed in the downstream separation equipment. These equipment can vary from platform to platform but they will operate at lower pressures and sometimes higher temperatures than a primary separator, which will help to release the left over entrained gas.
To accurately measure each resource, they will first need to be separated from each other. A measuring device, such as a turbine meter, Coriolis meter or another means of measurement can then be used to record the flow data of each resource.
I've got a bucket and Weir separator here that has sediment built up under the bucket.... Manually dumping belly valves on fluid collection side until clean out gets here.
![Oil & Gas 101: Follow The Pipe on a Wellsite [How Production Equipment Operates]](http://i.ytimg.com/vi/WGFPb61qm9I/mqdefault.jpg)
![Oil & Gas 101: Follow The Pipe on a Wellsite [How Production Equipment Operates]](/img/tr.png)
That was really awesome, simplified yet detailed, very informative, and crystal clear. Great job
thanks
Thank you for sharing your knowledge ❤️ very much informative and easy to understand 💌 THANK YOU
.
Very helpful. Thank you so much for this great explanation
superb and gorgeous explanation sir, thank you so much
Great Video, thank you for this very helpful information. Hoping for more videos related to Oil Industry
Thank you so much! More to come!
@@KimrayInc 고맙습니다
nice visual representation
Thank you, glad it was helpful!
It's always helpful you shouldn't remain ignorant
Very helpful,thanks.
My question is that unless you were involved in the engineering of the vessel how exactly can you tell the internal design just by walking up to the equipment?
Very nice
Great information. Would like to see more videos on various pieces of equipment throughout Refineries. Stripper Columns, Reactors, Splitters, Compressors, ETC. ETC...
Hello sir, what is the common problem in scrubber and what effect of scrubber if flow and pressure is high, thanks
There is have breakage or blockage in scrubber
Interesting
Quality
Hello,
I have a small question,
How would we know for sure that all the gas bubbles inside the feed escapes in the Gas section ? if any gas bubbles fall down into the liquid, does it have enough time to separate itself ?
All “free” gas will be separated if the separator is operating within its design parameter’s.
However, any small gas bubbles, or dissolved gas that’s go through the water or oil legs will be removed in the downstream separation equipment.
These equipment can vary from platform to platform but they will operate at lower pressures and sometimes higher temperatures than a primary separator, which will help to release the left over entrained gas.
1:35 vertical separator
How can find( measure) out levels of gas , oil and water ?
To accurately measure each resource, they will first need to be separated from each other. A measuring device, such as a turbine meter, Coriolis meter or another means of measurement can then be used to record the flow data of each resource.
I've got a bucket and Weir separator here that has sediment built up under the bucket.... Manually dumping belly valves on fluid collection side until clean out gets here.