Un saludo desde Venezuela reciba muchas bendiciones por sus enseñanzas en cada video que usted sube una duda el estaño de las soldadura dónde se queda gracias
gracias hermano, si usas este método, si hay soldadura, se disolverá en ácido clorhídrico y permanecerá allí en la solución, luego capturará las láminas de oro y luego procederá a nuestro proceso.
Hola. En el minuto 4:50 aprox muestras las láminas de oro en el filtro y los residuos de las T-CON pero quedan aún láminas de oro en ese material. Recomiendo usar disolvente con el material antes de empezar, así eliminas adhesivo de los Flex y se suelta todo sin perder oro. Así lo hago yo y en 7 días está el material super limpio. El oro no se puede perder Muchísimas gracias por el vídeo. Suerte en la vida
Thanks, yeah thats why i always prepare tub full of water beside my jod if incase, but this latex gloves is similar to butyl gloves which is highly acid resistant, but as I said, always prepare water beside your work, and always present of mind that your working with acid.
Thats the same effect brother, technical grade or lab grade expensive than food grade which is cheaper and the same effect for gold precipitation, if you use Iron sulfate thats much cheaper than smb and work also better
If you didnt read the heading properly. The video is to get away from smb and nitric acid although you create nitric acid when you mix potassium nitrate.
2:24 The highest concentration of hydrochloric acid is 36% at a density of 1.18 g/cm3. Your hydrochloric acid is 35%! Jesus Christ, where did you get such powerful acid?! 🙂 I want too.
Yes this is very good hydrochloric acid in our country there are company making this concentration for swimming pool, this acid too much fumes when you open the cap.
If ever your gold dissolve in sulfuric acid, prepare distilled water into beaker five times the volume of sulfuric acid, boil the distilled water then pour slowly sulfuric acid to hot distilled water, the gold precipitate, add distilled water if needed, then capture the gold to filter paper then proceed to aqua regia.
Actually I work to make gold jewellery and some of the time when I clean thin jewellery by sulfuric acid by heating it to the high temperature and pour some potassium nitrate the gold gets loss. Does it happens to me only or technically possible can you explain? And how to recover it actually?
Concentrated sulfuric acid can dissolve gold when heated in a high temperature specially mix a few amounts of nitric acid, and the nitric acid doesn't dissolve gold we know that. The possible happen here when sulfuric acid react to nitrate salt it produce nitric acid, because nitric acid isn't separated to sulfuric acid it dissolved your gold because of the present of sulfuric acid, for better result of your work you must separate sulfuric acid and nitric acid to avoid any complecations of your work, you can make 10% nitric acid thats really good for jewelry cleaning.
Listen carefully don't drag my video, if you still you don't understand turn on subtitle or cc in the top of my video. What's your spoken language brother? Tell me So I add your language here.
These are the things that those big gold miner channels do not show.
I appreciate you sharing your knowledge, thank you.
Thank you
Un saludo desde Venezuela reciba muchas bendiciones por sus enseñanzas en cada video que usted sube una duda el estaño de las soldadura dónde se queda gracias
gracias hermano, si usas este método, si hay soldadura, se disolverá en ácido clorhídrico y permanecerá allí en la solución, luego capturará las láminas de oro y luego procederá a nuestro proceso.
Good evening, thank you very much, I had a problem with nitric acid and you gave me a very nice solution !!
Welcome brother and thank you very much..
That was a great process and a nice gold button 👌
Thank you very much brother..
Hello love the videos
I have collected ram gold fingers only a total of 1kg
Can I ask is this worth doing or collect more ?
thank you brother, you can recover that is more than 1grams of gold it depends the quality of gold plating but if you want more, add more..
Hola. En el minuto 4:50 aprox muestras las láminas de oro en el filtro y los residuos de las T-CON pero quedan aún láminas de oro en ese material. Recomiendo usar disolvente con el material antes de empezar, así eliminas adhesivo de los Flex y se suelta todo sin perder oro. Así lo hago yo y en 7 días está el material super limpio. El oro no se puede perder
Muchísimas gracias por el vídeo. Suerte en la vida
Thank you bro
It looks like a awesome procedure amazing
Thanks
ang galing talaga nito, salamat sa mga tip and instructions master poor miner
Thanks bro
Good work. Love your channel!
Thank you..
Nice video
We can used sodium nitrate indeed of potassium nitrate
Yes you can, yes, it's possible as long as it's nitrate salt
Fantástico. Es más oro del que me esperaba
Thanks.
Adoro seus vídeos, vejo com muita atenção p aprender, thank You Brasil
Thank you very much.. I make portuguese subtitle for you my friend, all you need is to turn on cc above the video to see portuguese subtitle
Muito bom, Obrigado
Como está vc td bem? Não encontro o nitrato de sal, posso usar o que? Deus te abençoe!!
Use chlorine its work better also
GENIAL! OBRIGADO PELAS DICAS.
Thanks
Parabéns poor Miner 💎🇧🇷
Thank you..
Thank you for the great videos. Please be careful with your hands, as those goves are not acid resistant.
Thanks, yeah thats why i always prepare tub full of water beside my jod if incase, but this latex gloves is similar to butyl gloves which is highly acid resistant, but as I said, always prepare water beside your work, and always present of mind that your working with acid.
who is best food grade smb Or lab grade smb
Thats the same effect brother, technical grade or lab grade expensive than food grade which is cheaper and the same effect for gold precipitation, if you use Iron sulfate thats much cheaper than smb and work also better
Muito bom, Parabéns Brasil.
Thank you
Thanks from Australia
Thank you..
Thanks for sharing 😊
Thanks for watching!
Sir tanong san poh maka bili ng nitric acid ...sana masagot salamat.
Sa cebu marami daw doon
@@PoorMiners321 sir anong maganda at effective na pag neutralize ng nitric acid sana masagot
Sulfamic acid bro, wag gumamit ng urea hindi nakaka neutralized ng nitric yun.
If you didnt read the heading properly. The video is to get away from smb and nitric acid although you create nitric acid when you mix potassium nitrate.
you are the best my friend ,thank you
Thank you brother
Vídeo top,parabéns.
Thank you..
اللهم صل وسلم وزد وبارك على نبينا محمد صلى الله عليه وسلم تسليما كثيرا
Thank you very much..
Rota 66 na sua terra, ou não?Abraço!!
2:24 The highest concentration of hydrochloric acid is 36% at a density of 1.18 g/cm3. Your hydrochloric acid is 35%! Jesus Christ, where did you get such powerful acid?! 🙂 I want too.
Yes this is very good hydrochloric acid in our country there are company making this concentration for swimming pool, this acid too much fumes when you open the cap.
How to recover dissolved gold from sulphuric acid?
If ever your gold dissolve in sulfuric acid, prepare distilled water into beaker five times the volume of sulfuric acid, boil the distilled water then pour slowly sulfuric acid to hot distilled water, the gold precipitate, add distilled water if needed, then capture the gold to filter paper then proceed to aqua regia.
Actually I work to make gold jewellery and some of the time when I clean thin jewellery by sulfuric acid by heating it to the high temperature and pour some potassium nitrate the gold gets loss. Does it happens to me only or technically possible can you explain? And how to recover it actually?
And our work it has contains 99.4% gold 4% silver and remaining is zinc percentage.
Concentrated sulfuric acid can dissolve gold when heated in a high temperature specially mix a few amounts of nitric acid, and the nitric acid doesn't dissolve gold we know that.
The possible happen here when sulfuric acid react to nitrate salt it produce nitric acid, because nitric acid isn't separated to sulfuric acid it dissolved your gold because of the present of sulfuric acid, for better result of your work you must separate sulfuric acid and nitric acid to avoid any complecations of your work, you can make 10% nitric acid thats really good for jewelry cleaning.
👍👍❤
Thanks
❤
Thanks
I think you r a chemist pero ang daming step Pala . Alin ang mas maganda compared to burning w/ fire
Hindi ko kilala yung mga ganyang pamamaraan bro..pero marami pa po tayong paraan na mas madali pa.
Kolay gelsin selamlar
Thank you..
Can't understand you.
Listen carefully don't drag my video, if you still you don't understand turn on subtitle or cc in the top of my video. What's your spoken language brother? Tell me So I add your language here.
Learn to listen
google ok. for thailand😁.🙏🙏
Thank you..
Thanks from Australia
Thank you..