DRUM DEVELOPER TRANSFER KYOCERA P6021 Service Tutorial
Вставка
- Опубліковано 17 вер 2024
- Color printer Kyocera replacement Drum Unit all coros, drveloper Unit and Transfer Unit. Kyocera has many color problems, in particular the message add toner, replace toner, end of toner often appears and toner is new. Therefore, I will show you how to replace the parts responsible for this problem.
Parts for P6021 copy-expert.com...
🔥🔥 UA-cam SUPPORT: / @mrricoh
😁😆 PATREON: / copyexpertmoviestudio
🔥💥 PATRONITE: www.patronite....
📽Camera: CANON EOS250D
🎬 Plan lighting: Sachtler Reporter 200D
🎤 Microphone: Trust GXT 252 + Emita Plus Steraming
💻 Movie editing program: WonderShare Filmora
Copier parts www.copy-expert...
Facebook: / copy-expert-1134316788...
Used copier parts www.copy-expert...
#KYOCERA #PRINTER #DRUM #TUTORIAL #COPYEXPERT #JEMIOŁEK
Thank you for these videos Tomasz! I presently have a squeaky P6021and I am in search of a maintenance kit as I am told the printer is old and cannot be serviced.
You will certainly find such a set, but the machine is quite old and it may soon be difficult to purchase parts for it.
Thank you for this video. It helps a lot. Especially with all the small plastic parts in it....
I am very happy. Regards. Hope you have repaired your Kyocera printer.
@@MrRicoh go on
My printer, Ecosys P6030, prints black, rough horizontal lines repeating every 10 cm. What could this be?
You have to check od replace Drum Unit. Only
@@MrRicoh Thanks! So usually you can't repair/fix Drum Units? Only replace?
3C!!! = Clear! Clever! Cool!
It's very nice. I like creative comments like this. Regards.
Danke ein super Video hat mir sehr geholfen
Ich bin froh, dass ich dir helfen konnte. Vielen Dank für Ihren Kommentar. Schau dir meine anderen Filme an.
Very useful video for my line of work, ty.
@Death Dealer Very useful video for my line of work, ty.
Super. Damit konnte ich meinen Fehler "Service rufen 7402" reparieren.
Ich bin sehr glücklich. Schöne Grüße.
Check toner container still shows even though I changed cartridge (after changing the others. The old one is not full. Why does it still say "check the toner container"? But its my first toner change. Never an issues before.
You may have to manually reset the counter.
@@MrRicoh ok I will keep a note. Thanks, but that printer is in the basement at the moment
Perfect!!
Thanks
@Tomasz - OFF TOPIC Question:
thank you for this great clip. I've got another question - my printer says "close the backdoor" but it IS closed. it is locked with the grey hooks. I have TWO 6021's - i can compare that - all looks fine - but something after the "SELF FEST" says "close the rear cover". Any IDEA - PLEASE HELP ME.
.
dziękuję za ten świetny klip. Mam inne pytanie - moja drukarka mówi "zamknij tylne drzwi", ale JEST zamknięta. jest zablokowany szarymi haczykami. Mam DWA 6021 - mogę to porównać - wszystko wygląda dobrze - ale coś po "SELF FEST" mówi "zamknij tylną pokrywę". Jakikolwiek POMYSŁ - PROSZĘ O POMOC.
Na tylnej klapie jest ostający plastik, który zamyka chip. Pewnie to jest złamane i dlatego czujnik daje informację, że klapa jest otwarta.
Witam,
dzięki pokazał Pan jak wyjąć wywoływaczki, ale jak je wyczyścić , nie wiem czy trzeba ją rozebrać, jeżeli tak to jak?
Bo podobno jest winna i przepala mi chip ?
@MrOjgyn Przepalanie chipa nie ma nic wspólnego z koniecznością rozebrania i wyczyszczenia wywoływaczki.
..... there is a SCREW? I didn't even THINK to look for one!
Such a little surprise.
Same model of mine loses all its Magenta toner dry in few prints, the whole pages come out painted as pink and the bottle container gets filled with it like wasted in few prints. What should be done to fix it as I tried all that I could physically or searching online but no solution?
Hey.
1. Insert a new developer unit magenta, there is no other solution.
2. Insert a new original toner cartridge and never use substitutes.
3. Initialization of the developer and it will be fine.
@@MrRicoh thanks for your kind reply.
The original was sucked dry so yesterday I replaced it with a brand new one and in a matter of few hours it went from 100% to 5%. I opened and checked up to the developer unit but everything seems normal and usual so would there be anything else that could be done?
If you have such a problem, in my opinion, dispose of the printer because the repair will be too expensive.
I sell kyocera products for 306ci as never before does one of these stains on the copy or print along the vertical interval. Thanks if anyone knows the problem
Unfortunately, I don't know the solution to this problem, maybe someone else will help.