I am currently doing or aluminium and 3/8" glass door 5' wide and 8' high. Therefore my customer needed your syste M plus pivot hinge. The way l see it install. The pivit hinges need to be place 16" from one edge of the door. Which model number of the system M l would need to order?
Hello and thank you for reaching out. For calculating the lateral forces, which tell something about the ideal place for the pivot point, please use our calculator: www.fritsjurgens.com/lateral-force-calculator If you are unsure which pivot system suits your project best, please use our product selector and find out excatly what you need in a few simple steps: www.fritsjurgens.com/selector
Hi Robin, these videos are super informative. I have recently purchased 3 sets of System M hinges. I was wondering if you can make video of the installation into the top and bottom of the door itself. Regards Amish
Hello Amishrodra, thank you for your kind words. We have taken note of your request. Please keep an eye out for new video's on our UA-cam channel in the near future.
System M and System M+ differ in adjustability. System M+ offers extended adjustment settings such as Latch Control- when latching bolts are applied, Damper Control- to adjust the opening damping (hydraulic backcheck / Wall protection) and closing damping (soft-close) of the door, and also 30-degree speed control, which allows adjusting the closing speed for the last 30 degrees of the doors closing movement. You can learn more about System M: www.fritsjurgens.com/pivot-hinge/system-m or System M+: www.fritsjurgens.com/pivot-hinge/system-m-plus
Bedankt voor je vraag. Latch Control geeft de taatsdeur extra snelheid in de laatste 10° van de sluitbeweging. Als je een deur met aanslag hebt, valt deze dus makkelijk in het slot. Voor meer info, zie: www.fritsjurgens.com/nl/inspiratie-taatsscharnier/blog/m-in-detail-latch-control
@@fritsjurgens Dankuwel, ik heb zo een systeem moeten plaatsen maar moet deze nog afregelen. Kan je de deur laten openstaan op 90 graden? Als ik deze openduw moet ik de deur met de hand stabiliseren. Grts
This was a very helpful installation video! Thank you.
We're happy to hear it is of good use to you.
I am currently doing or aluminium and 3/8" glass door 5' wide and 8' high.
Therefore my customer needed your syste M plus pivot hinge.
The way l see it install. The pivit hinges need to be place 16" from one edge of the door.
Which model number of the system M l would need to order?
Hello and thank you for reaching out. For calculating the lateral forces, which tell something about the ideal place for the pivot point, please use our calculator: www.fritsjurgens.com/lateral-force-calculator
If you are unsure which pivot system suits your project best, please use our product selector and find out excatly what you need in a few simple steps: www.fritsjurgens.com/selector
Nice
Hi Robin, these videos are super informative. I have recently purchased 3 sets of System M hinges. I was wondering if you can make video of the installation into the top and bottom of the door itself. Regards Amish
Hello Amishrodra, thank you for your kind words. We have taken note of your request. Please keep an eye out for new video's on our UA-cam channel in the near future.
I have a few videos showing how I install the pivot mechanism's using a jig or mortising machine.
hello what is the difference between m32 m+
System M and System M+ differ in adjustability. System M+ offers extended adjustment settings such as Latch Control- when latching bolts are applied, Damper Control- to adjust the opening damping (hydraulic backcheck / Wall protection) and closing damping (soft-close) of the door, and also 30-degree speed control, which allows adjusting the closing speed for the last 30 degrees of the doors closing movement.
You can learn more about System M:
www.fritsjurgens.com/pivot-hinge/system-m
or System M+:
www.fritsjurgens.com/pivot-hinge/system-m-plus
this guy is hot!!! he looks like he is reading brail.
Wat is de functie latch?
Bedankt voor je vraag. Latch Control geeft de taatsdeur extra snelheid in de laatste 10° van de sluitbeweging. Als je een deur met aanslag hebt, valt deze dus makkelijk in het slot.
Voor meer info, zie: www.fritsjurgens.com/nl/inspiratie-taatsscharnier/blog/m-in-detail-latch-control
@@fritsjurgens Dankuwel, ik heb zo een systeem moeten plaatsen maar moet deze nog afregelen. Kan je de deur laten openstaan op 90 graden? Als ik deze openduw moet ik de deur met de hand stabiliseren. Grts
Voor System M en ook System M+ zijn vastzetstanden op 90, 0 en 180 graden van toepassing. Je hoeft de deur niet zelf te stabiliseren.
these keys are made of mayonnaise
Thank you for sharing your feedback. We have taken note and will use this for further improvement our products, accessories, and service.
@@fritsjurgens 😂
Adjustments are in side view of out side of the door ? Floor adjustment 12:23