Great Video! My CE0523 Case with the HU83 Blade arrived today! Just came back from the key shop to cut the blade. Everything worked fine! Took me 1 hour including cutting the blade at the key shop! This video is highly recommended!
thanks for the video. you can also change the lamine of the key, and you don't have to go to the key house. you with a very thin key can go in the carnation that holds the lamine and with way go pushing the carnation, then the lamina sái, and just put the old one, manage to change well, if it is a little stronger with a very thin file, just take a walk until you are well, I hope I have helped
Salut! Multumesc pentru aprecieri! Pe viitor intentionez sa aduc o navigatie Android pentru 207, trebuie sa mai gasesc masina pe care sa o montez si sa filmez tutorialul :)
So many comments...This new fob looks great, but moving the original, PSA-made old blade to this new kind of fob was much more difficult than moving the old blade to a fob that looks the same as the original. I have always used the old blade with the fob, never have I needed to replace the blade.
Hi. I preferred to cut the blade at a key workshop. I recently bought a new model key fob for my car and made the cut at KEYYOU, I hope it goes well. New model: s.click.aliexpress.com/e/_DlZjT0t
@@AdrianDragan aww man thanks pal ;) nice 1 mines fits like a glove but the 1 I got for the Mrs 207 CEO 536 did not want to go in the new case lol I will file the very edge were it's light green and has no circuit running on the board :) edit: had to add they key cutter guy punched a hole right through my Hu83 blade :p waiting on a replacement as we speak
How did case show in long run? I've wanted to do same today but guy that works in key shop said that because case is tight board tends to die out fast because of it,and causing a short battery life as well?I really like the case and would like to make one for me.
Hi, thanks for your video. Everything worked fine, I had my new key cut, and I was told by a few people to be very gentle with the key since it's more fragile than the factory one. Have you had any experience of the key braking or anything similar ? thanks
@@AdrianDragan I bought the same one CE0536 for Peugeot 308. So far it seems good, but I will try to be careful with it. It would be a headache if it got broken while stuck inside.
i made all this tutorial and it worked thanks! but I have only one problem, I only can unlock and lock the car with the key inserted or near the turn on swicht, what can be te problem? the battery is new
Ești tare mane ,te urmăresc cu plăcere . Continuă ca faci treabă bună !! Schimbarea cablului la frână de mână ai un filmuleț? Sau poate faci.. Sănătate maximă!!
Salut Adrian , dacă ma poti ajuta cu blocarea mașinii. Când plec de pe loc după câțiva metrii ar trebui sa se blocheze ușile automat dar acum nu o mai face. Ce poate fi din experieta ta cu peugeoturile? Mersi!
Salut. In masina ai un buton pentru blocarea si deblocarea usilor, tine apasat acel buton timp de cateva secunde si functia de blocare automata a usilor se va activa sau dezactiva. Sa-mi spui daca rezolvi :)
Great video. Any chance you could do one on pairing a new key with your car. My keyfob has the battery contacts broken so need a new electronics board and thus transponder. Would love to see how it’s done before getting all the bits and pieces like diag box etc.
Hi! Yes, you can pair a new key that has new electronics with your car on a Peugeot dealer. You can do this at home using Diagbox but you need a card with a security PIN code for your car, if you do not have that card with PIN I think you can get it from the dealer. Thanks!
Adrian Dragan Thanks. I was hoping you could do a video demonstrating the process? Love your videos. Have been a great resource for me when working on my 308
Hello Adrian, i have one question from the netherlands. I did the same as you show in the video.but my chip died.so i ordered a new one.and a sbb 42.02 key programmeur to learn the new key.but i can not find the peugeot 308 2008. They ask me the codes? Do you know how that works?
Hello. I don't know how that programmer works, maybe it's not compatible with your car. I am thinking of trying the Peugeot 307 year 2006, 2007. The Peugeot 308 in 2008 used the same protocols as the 307 from the years mentioned above.
At my new key I did not remove the blade because I cut its profile at a key workshop as you see in the clip. But I remember it was a small bolt on the side.
Hi Adrian, doesn't the 0523 key (Peugeot 308 model 2013) come with a rfid chip mulded in the key case plastic, so the car won't start without the original key case?
Hello i wanna ask you I ve cuted the blade and it enter on the two side but he only turn on one side thevother side heckeep blocked what would be the issue please
Excellent video, do you had any issue with the buttons? (Lock/unlock) or they work fine? Also a small tip, you can change the blade directly, it is hold in place by a small pin, needs quite patience...
Hello. I had no problem with the buttons, it works very well. I couldn't take the blade from the old key because that bolt is placed differently on the new key blade.
Foarte interesante videoclipurile.Faci o treaba super. Am observat ca ai si vitiligo dacă nu mă înșel? Doar pe mâini? Intreb că și eu ma confrunt cu aceasta problema...din pacate
Nu te inseli, am si eu vitiligo. La mine este o "mostenire" de familie, a avut bunica mea, are tatal meu, si dupa cum se vede am si eu. Nu ma deranjeaza cu absolut nimic, imi desfasor viata normal :). Am grija sa ma fersec de expunerea excesiva la soare. Sper sa nu te stresezi prea tare pe acest subiect, bucura-te de ceea ce este in jurul tau, vitiligo nu te va impiedica sa ai o vitata absolut normala :)
It's a launcher installed from the Google Play store, it's called CarWebGuru Launcher and you can find it here: play.google.com/store/apps/details?id=com.softartstudio.carwebguru In the future I think I will make a video about this launcher, it is my favorite.
What a nice way to feel like you own a new car just by replacing the old case with another thats is much more better looking! But i got a question for you, My car key case got 3 buttons, will that work for me with the new case that you got ?
Hello Adrian, how does the new key blade hold up? I've read somewhere online, that the blade in these keys is made of some chinesium - soft metal prone to wearing out and stopping to work and/or (in worst case) cracking (the blade allegedly cracked inside keyhole). How much did you pay for blade copy service? They asked 40€ at my place, and refused to engrave into "ebay/china sourced" key fobs. They offered whole new blade for mentioned price.
Hello. I haven't had any problems with the key blade during this time, and the case holds up well. I paid about 10 euros to a key workshop in my city to cut the blade.
Salut Adrian.Multumim pentru video-urile despre Peugeot -foarte informative.Tocmai ce am cumparat si eu de pe Aliexpres o cheie si as vrea sa merg la un centru de chei pentru copierea lamelei.Imi poti spune orientativ cat te-a costat pe tine aceasta operatie?
Hello Adrian, my case is beginning to come apart for my Peugeot 208 fob. My blade is working fine- can I just transfer my blade into the new key cover? Many thanks.
Hi Adrian, i replaced the key case, but i found that the buttons doesn't fit like on the original key case. Do you have a problem when press the buttons, it doesn't work very well when i press in the middle of the button, so i need to press more to the edges?
Salut! Daca ai cumparat carcasa cu partea electronica (telecomanda) va trebui ca aceasta noua cheie sa fie codata cu cifrul (codul) de siguranta al masinii. Aceasta operatiune se face doar cu unelte speciale si de obicei e recoamdat sa fie facuta in reprezentanta. Mai sunt si "baieti" pe la magazinele de chei care fac copierea cheilor (inclusiv partea de codare) dar se poate intampla ca uneori sa ramana erori in urma operatiunii sau chiar sa nu mai porneasca masina.
I orderd this key also, went to a Peugeot specialist to programme it but the buttons don’t work. The key opens and starts the car But the buttons don’t work. I have a 207cc cabriolet
Am un 307 sw din 2002 are cheie normală problema este ca asa vrea briceag, ca nu mai sparge buzunarele,nu se mai agata aiurea.E cheie rotundă. Pot muta pe briceag?Mulțumesc
This is probably the key case you need, but also check the type of blade that has your key: www.aliexpress.com/item/4000133576855.html?aff_platform=portals-tool&sk=_dY4sDHm&aff_trace_key=2cc1c55e0e8e4ff4b859acd55f40c3d1-1593445020403-06354-_dY4sDHm&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail&aff_request_id=2cc1c55e0e8e4ff4b859acd55f40c3d1-1593445020403-06354-_dY4sDHm
Hello. It is the difference to the battery holder on the electronic board: CE0523: ae01.alicdn.com/kf/HTB1.DUdVgDqK1RjSZSyq6yxEVXai.jpg CE0536: ae01.alicdn.com/kf/HTB1vOoiVbvpK1RjSZPiq6zmwXXaG.jpg Compare it with your key and see what model it is.
Hallo Ich habe gefragt, ob dieses Experiment mit Peugeot 407 Modell 2005 SW erfolgreich ist hat 3 Tasten in der Taste bitte beantworten Sie meine Frage Ich wünsche Ihnen Erfolg immer danke
@@AdrianDragan do they sell it with the internal electronics. Do you have any contact information of this seller to send them pictures of my remote and internal electronics
I just got the Key , but I read something about a Key code, do i need to code the new Key or like se use the old eletronics you dont need to do nothing
@@AdrianDragan Daca faci o comparatie intre cheia original si acea de pe Ali vezi ca lamele sunt la 90 grade una fata de alta. Acest lucru am in vedere, nu te deranjeaza cand o folosesti?
Hi friends. I bought the same for Peugeot 407 CE523 VA2 Blade. I bought three different models from three different vendors. But my car electonic anti theft faulty it is malfunctioning. The car not working. I think immobilizer stating away from key not contacting.what should I do?
Very useful video, My key has been in a poor state for months now. Thanks to you I've finally gotten around to do it. Would this work with 307cc too? or do i need to get a key cover from another link?
@@AdrianDragan thanks for the advice. Unfortunately, when I bought the key, same battery type and blade type, i took it to the local key cutter, the key won't turn the ignition on. I think I give up with this one
@@AdrianDragan the old key works alright, without the chip the car wont start (obviously), but the new one won't even turn. I can lock the side compartment with the new key no problem though, so maybe I bought the wrong key after all
Very useful video, CONGRATULATIONS! I would like to ask you a question: my old case has 2 buttons, but if I buy a new case with 3 buttons, could I use the third button to remotely open the boot lid? (If the electronics of the case allows me to do this, I could activate that functionality, via Diagbox). Thanks in advance!
@@denic4553 This is good news, I will buy a complete key with 3 buttons to see if I can make it functional. How did you pair the new car key, use Diagbox or go to a local dealer?
Mersi de video! Chiar ieri ma gandeam sa comand asa ceva :). Sunt curios daca se poate face din diagnoza doar deschiderea portbagajului precum la 508. Atunci s-ar merita cumparat cheia cu 3 butoane.
Hi Adrian, thanks for sharing your experience. Did you engrave the new blade by yourself? Do you know which model of machine was used to engrave? Thanks again!
Hi. I don't have a key blade engraving machine. I went to the key store and there he made a copy of the original blade. I think you can also find on Aliexpress machines for duplicating keys: www.aliexpress.com/item/4000405860516.html?aff_platform=shareComponent-detail&sk=_d8ry4GO&aff_trace_key=6b3ffa4e93004c968fb0ac9ac29b3077-1599120962787-09410-_d8ry4GO&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail
@@AdrianDragan Hi, yeah i saw so many machines on aliex. at different prices but when i watched your video and the engraving process i was surprised because it was so clean and "seems to be" easy to do. Anyway thank you again for your video and for your quick reply!
Thank you for the video.. i will definitely buy one of these.. i notice you have a nice menu on that mekede dvd.. is it an application that you've installed?
Hi! It's a launcher installed from the Google Play store, it's called CarWebGuru Launcher and you can find it here: play.google.com/store/apps/details?id=com.softartstudio.carwebguru In the future I think I will make a video about this launcher, it is my favorite.
salut. am comandat si eu carcasa noua pt un 407. dar nu se potriveste placa in ea, eu am cu bateria pe placa dar nu asta e problema. la cea noua distanta intre butoane e mai mare decat la cea veche. eu am cu 3 butoane. unu il apasa dar celelalte 2 nu vin unde trebuie placa fiind mai mica
Salut. Din pacate nu prea cred ca am cum sa te ajut, eventual intreaba vanzatorul despre aceasta problema. Fa niste poze si trimite-i pentru a vedea problema.
hola Adrian, hice una copia del espadin por AliExpress pero me equivoque en la carcasa ,el caso que probando el espadín abro la puerta pero cuando quiero arrancar el coche me dice llave incorrecta. a que se debe esto? Gracias
Hola, si no metes la electrónica original de la llave sale ese mensaje y no arranca el coche, una vez la pones en la llave funciona. Yo antes de hacer el cambio hice la copia en el espadín y fui a probar el coche para ver si funcionaba. Se abría el cierre centralizado (cosa que hace pensar que la llave estaba bien copiada) pero el coche indicaba que había un problema en la llave y no arrancaba. Una vez instalada la placa del mando viejo dejó de hacérmelo.
Hi. Theoretically it is possible but you have to make the blade thinner where it enters the support. I said it was too hard and I preferred to cut the new key.
in cazul meu un peugeot 5008 (2015) bateria e pe placa . iar lama e HU83 in schimb nu cred ca vanzatorul are carcasa placa cu bateria incorporata s-au ma insel?
Salut. Am eu doua carcase pentru modelul cu baterie pe placa electronica, cu lama HU83. Le-am comandat mai demult nestiind de treaba cu suportul bateriei. Daca te intereseaza contacteaza-ma pe pagina facebook.com/psadiyrepairs/
@@AdrianDragan ma intereseaza dar problema ar putea fi distanta. Din ce am vazut la vanzator .. nu ma pot asigura îndeajuns am codul CE 0523 .. Imi place formatul carcasei si daca vine si cu logo ca la tine e ok. Dar ce ma retine sunt pozele care arată gaura aia de la baterie ( într-adevăr e mai mica) Tu la cele care nu le folosesti cum ai ? Eu sunt in zona Barcelona ca locație dar macar imi fac o ideie . Masina e din 2015 iar cheia e cea standard ca si la tine in video dar bateria pe placa
Hi Adrian! Thank you for this and all your other informative videos. I've ordered the new key case for my 207, expecting it to arrive soon. :) I wanted to ask you about one thing I'd heard related to the battery and electronic board removal during installation. I heard that there is a certain amount of time within which you can keep the battery and electronic board apart (something like 30 seconds) and that if you go beyond this time, the key will not work anymore. Do you know anything about this and did you have to adhere to this time limit when assembling the new key case? It would be good to know, the last thing I want is for the key to not work anymore. Thank you very much in advance! :)
Hello. This is the first time I've heard of such a problem. However, to be pessimistic, it would be good to try not to keep the electronic board without a battery for too long. I can say that I left about 5 minutes without the battery and it works perfectly, without problems.
Odată cumpărată cheia vine cu un Cip universal se poate cumpăra și separat dacă ai deja carcasa dar e mai convenabil sa o cumperi cu totul , acesta trebuie programat după codul mașinii , apoi urmează rescrierea cheii in calculatorul mașinii . In urma resoftarii calculatorului cheia de rezerva este stersa și ea din calculator , prin urmare de fiecare data când adaugi o cheie noua și vrei sa fie toate funcționale , trebuie înscrise pe rând toate cheiile in calculator pentru a le recunoaște pe toate . Treaba asta se face cu un aparat din câte știu eu și sunt multe persoane care pot sa facă asta . In cazul meu durata împerecherii ambelor chei (aceasta și cea de rezerva ) a fost scurta . Depinde de experiența celui care îți face împerecherea . Eu am vrut sa am ambele chei funcționale in cazul in care pierd cheia . In cazul lui Adrian Drăgan nu știu cum s-a procedat dar bănuiesc ca in același mod .
Wil any locksmith/key shop? Cut car keys? I know several local shops that do house keys etc, but i am unsure if they do car keys like these..? Probably..?
Hi, I have a question regarding the PP2000 DiagBox Lexia 3 diagnostic tool. 🤔 Is it true that with that item you can also program virgin key transponders (from a regular key or remote key fob) or basically add the new virgin transponder info to your car's computer ? 😉 A tutorial on this would be super neat. Thanks ! 😏🖒 Best Regards,
Hi, Yes it is true. But you need the security card with a PIN for your car. You should have this card or ask for it at your Peugeot dealer. I noted on the to-do list such a tutorial.
@@AdrianDragan Yeah but that card is costly to obtain. I didn't get mine when I bought the car used. 😶 I heard that there are even websites where you just input/supply your VIN code & you get in return the 4 pin digit code for free. 😇
@@AdrianDragan Have a look at this: - mhhauto.com/Thread-Peugeot-Citroen-PIN-From-VIN Or search (via DuckDuckGo) for keywords: "Peugeot VIN to PIN" I don't know how many of these websites or forums are still active though. 🙄 Now here you have some links to tools/readers: - blog.carkeydeals.com/what-is-the-best-citroen-peugeot-psa-pin-code-reader/ - obd365.eklablog.com/read-peugeot-408-pin-code-and-program-key-by-obd-a132358974 However I have no idea if any of these are reliable or even if they work as advertised. 😕
i take out the key blade and the end is different.. old blade dont fit in the new keycase.. so i need to put it back and still need to go to the keyshop 😅
This looks really good and easy. I have a Berlingo which has the same parts as the C4. So the key should work also. 4 Dollar for cutting the key is almost more expensive than the case itself. 😂😂 You cut the key yourself at the dealer. Is there a reason not to have it cut via internet? Any opinions on that?
Great Video! My CE0523 Case with the HU83 Blade arrived today! Just came back from the key shop to cut the blade. Everything worked fine! Took me 1 hour including cutting the blade at the key shop! This video is highly recommended!
Thanks!
How much money cost to cut the keyblade ? Thank u friend
Just got mine. Your video is super detailed and helpful. Everything works as seen in the video. Thanks a lot!
Mi am comandat o acum o săptămână, aștept sa ajungă și sa o schimb.este numai bun tutorialul, o sa ma ajute. Sănătate, numai bine.
Год назад заказал на али и сделал себе такой ключ! 3008 был доволен!
thanks for the video. you can also change the lamine of the key, and you don't have to go to the key house. you with a very thin key can go in the carnation that holds the lamine and with way go pushing the carnation, then the lamina sái, and just put the old one, manage to change well, if it is a little stronger with a very thin file, just take a walk until you are well, I hope I have helped
Thank you so very much. Here in Australia, a replacement can cost up to $200!!
It was expensive. Should they insist on replacing the electronics in the key then, too?
No need to change electronics. Price is to mirror the electronics programming onto another full module
Similar a España, 140€ !
Bravo in tutto fai degli ottimi tutorial nei minimi dettagli👍👍👍 un saluto dall'🇮🇹 (italy)
Exact aia o am si eu de pe ALI EXPRESS , de 2 ani o am si e Extrem de Rezistenta , nice work
Multumesc! Sunt foarte utile clipurile tale! De abia astept sa ma apuc de mesterit la peugeotul meu 207 😁
Salut! Multumesc pentru aprecieri!
Pe viitor intentionez sa aduc o navigatie Android pentru 207, trebuie sa mai gasesc masina pe care sa o montez si sa filmez tutorialul :)
Bardzo dziękuję za fajny filmik. Pozdrowienia z Polski :))
So many comments...This new fob looks great, but moving the original, PSA-made old blade to this new kind of fob was much more difficult than moving the old blade to a fob that looks the same as the original. I have always used the old blade with the fob, never have I needed to replace the blade.
Hi. I preferred to cut the blade at a key workshop. I recently bought a new model key fob for my car and made the cut at KEYYOU, I hope it goes well.
New model: s.click.aliexpress.com/e/_DlZjT0t
Great job, the link which is in your description showing a key case without the logo!! But the one you have is with a beautiful logo!!!
Hi! All key cases come with the logo. Probably for copyright reasons they do not show the logo.
@@AdrianDragan Perfect, thank you very very much friend
Hey buddy the PCB is not fitting in the new case by 1mm can it be filed or sanded a small amount ? To help the case close properly
Hi. Can it be filed or sanded a small amount but you have to be careful not to cut the circuit on the PCB.
@@AdrianDragan aww man thanks pal ;) nice 1 mines fits like a glove but the 1 I got for the Mrs 207 CEO 536 did not want to go in the new case lol I will file the very edge were it's light green and has no circuit running on the board :) edit: had to add they key cutter guy punched a hole right through my Hu83 blade :p waiting on a replacement as we speak
Foarte buna descrierea
Am cumparat și eu una este identica ca și în clip
Multumesc!
0:41 Peugeot expert also
Mulțumesc Fffffrumos Bro...Salutari din Danemarca
Cu placere! Te salut!
Very useful video. Thank you and waiting your next project
Nice. Thanks from 🇲🇾 Malaysia
I've had this type of key fob for some time,I just need to get the key cut.
Watched this one too, and done like you showed us. Thx man, you rock.
Fiz a troca da chave do 307 para a chave do 308, porem na carcaça nova do 308 não reconhece o chip, será que ficou muito longe o sensor?
Olá. Você já tentou colocar o case antigo? O chip fica visível se você usar o case antigo novamente?
Thank you from France 💓
How did case show in long run? I've wanted to do same today but guy that works in key shop said that because case is tight board tends to die out fast because of it,and causing a short battery life as well?I really like the case and would like to make one for me.
Hi. The case looks very good and today, since I installed this case I have not changed the battery and have had no problems.
@@AdrianDragan Hi,and thanks it seems like it was classic seller screw for money haha
@@sjlaw1722 Something like that
Gracias por el video explicando, mi llave es CE0523 SE PUEDE USAR TAMBIÉN
Did you have to re program this key by the way?
Hi. If you only buy the case + blade it is not necessary to reprogram it.
Great video! Thanks for the english subtitles
Hi, thanks for your video. Everything worked fine, I had my new key cut, and I was told by a few people to be very gentle with the key since it's more fragile than the factory one.
Have you had any experience of the key braking or anything similar ?
thanks
Hello. I don't know which key case you bought but my new key is very durable, looks great and is sturdy.
@@AdrianDragan I bought the same one CE0536 for Peugeot 308. So far it seems good, but I will try to be careful with it. It would be a headache if it got broken while stuck inside.
I have never heard a blade break inside the ignition switch. I don't think you have to worry.
i made all this tutorial and it worked thanks! but I have only one problem, I only can unlock and lock the car with the key inserted or near the turn on swicht, what can be te problem? the battery is new
Hello. There may be a problem with the key transponder. It works perfectly for me.
Ești tare mane ,te urmăresc cu plăcere . Continuă ca faci treabă bună !! Schimbarea cablului la frână de mână ai un filmuleț? Sau poate faci.. Sănătate maximă!!
Salut! Am pe lista "de facut" si inlocuirea cablului de la frana de mana, doar ca va mai dura ceva timp :)
Multumesc pentru aprecieri :)
Did you have to program new key or just grave new shape in new case?
Hi. If you transfer the electronic board from the old key to the new one you have nothing to program, you just have to grave new shape.
Even if battery will click out? Sorry for silly question but I wish to know. Thanks
@@ireneuszkarpierz537 Even if you remove the battery, there is no problem.
Great video . Thanks from Portugal.
Hi Adrian. Want to know if a ceo 536 key with chip work in place of a ceo 523?....
Hello. I do not think so .
@@AdrianDragan okay. I got it working by starting but can't get it to work remotely.... Thanks anyway....
Salut Adrian , dacă ma poti ajuta cu blocarea mașinii. Când plec de pe loc după câțiva metrii ar trebui sa se blocheze ușile automat dar acum nu o mai face. Ce poate fi din experieta ta cu peugeoturile? Mersi!
Salut. In masina ai un buton pentru blocarea si deblocarea usilor, tine apasat acel buton timp de cateva secunde si functia de blocare automata a usilor se va activa sau dezactiva. Sa-mi spui daca rezolvi :)
@@AdrianDragan Gata , a mers :) . Statea telefonul tot timpu apasat pe butonul ala . E normala acum
Great video. Any chance you could do one on pairing a new key with your car. My keyfob has the battery contacts broken so need a new electronics board and thus transponder. Would love to see how it’s done before getting all the bits and pieces like diag box etc.
Hi! Yes, you can pair a new key that has new electronics with your car on a Peugeot dealer. You can do this at home using Diagbox but you need a card with a security PIN code for your car, if you do not have that card with PIN I think you can get it from the dealer.
Thanks!
Adrian Dragan Thanks. I was hoping you could do a video demonstrating the process? Love your videos. Have been a great resource for me when working on my 308
@@benjaminweslake4174 I don't promise to make this video to show how to pair the new key with the car because I don't have that car security PIN.
I don't need to do this but I still enjoyed the video 👍
Hello Adrian, i have one question from the netherlands. I did the same as you show in the video.but my chip died.so i ordered a new one.and a sbb 42.02 key programmeur to learn the new key.but i can not find the peugeot 308 2008. They ask me the codes? Do you know how that works?
Hello. I don't know how that programmer works, maybe it's not compatible with your car. I am thinking of trying the Peugeot 307 year 2006, 2007. The Peugeot 308 in 2008 used the same protocols as the 307 from the years mentioned above.
I bought this new key for my 406 1999 d9 can you tell that this can be configured and how?
Hi, How do you remove the blade from the new key fob? It seems that there is no pin that holds the blade like on the old fob?
Hi. It should have a pin, it may only be visible when you open the key case.
@@AdrianDragan i don’t see it through the hole, so how do I remove it, do you know? The case is opened, but I can’t see it.
At my new key I did not remove the blade because I cut its profile at a key workshop as you see in the clip. But I remember it was a small bolt on the side.
Hi Adrian, doesn't the 0523 key (Peugeot 308 model 2013) come with a rfid chip mulded in the key case plastic, so the car won't start without the original key case?
Am schimbat-o și eu. Este ff faina
Hello i wanna ask you
I ve cuted the blade and it enter on the two side but he only turn on one side thevother side heckeep blocked what would be the issue please
Excellent video, do you had any issue with the buttons? (Lock/unlock) or they work fine? Also a small tip, you can change the blade directly, it is hold in place by a small pin, needs quite patience...
Hello. I had no problem with the buttons, it works very well. I couldn't take the blade from the old key because that bolt is placed differently on the new key blade.
@@AdrianDragan Thanks! Good to know and keep it in mind for future conversions :)
Wich battery is used in this new key?
Hi. The same battery: CR1620
Foarte interesante videoclipurile.Faci o treaba super.
Am observat ca ai si vitiligo dacă nu mă înșel? Doar pe mâini? Intreb că și eu ma confrunt cu aceasta problema...din pacate
Nu te inseli, am si eu vitiligo. La mine este o "mostenire" de familie, a avut bunica mea, are tatal meu, si dupa cum se vede am si eu. Nu ma deranjeaza cu absolut nimic, imi desfasor viata normal :). Am grija sa ma fersec de expunerea excesiva la soare. Sper sa nu te stresezi prea tare pe acest subiect, bucura-te de ceea ce este in jurul tau, vitiligo nu te va impiedica sa ai o vitata absolut normala :)
@@AdrianDragan Asa încerc să fac si eu sa nu mă stresez.Pana la urma nu este ceva atât de grav.Mersi pentru sfaturi si răspuns.
Hi nice video
I have a question from where the logo can you send any link please
Thx 😊
Hello. You receive the logo with the key.
Very good video. Whitch
car launcher is used in your car radio?
It's a launcher installed from the Google Play store, it's called CarWebGuru Launcher and you can find it here: play.google.com/store/apps/details?id=com.softartstudio.carwebguru
In the future I think I will make a video about this launcher, it is my favorite.
@@AdrianDragan thanks you so much. This launcher is the best
What a nice way to feel like you own a new car just by replacing the old case with another thats is much more better looking! But i got a question for you, My car key case got 3 buttons, will that work for me with the new case that you got ?
Hi! You need to choose the right key case with 3 buttons for your car. See the links in the clip description.
Thanks! :)
Hello Adrian, how does the new key blade hold up?
I've read somewhere online, that the blade in these keys is made of some chinesium - soft metal prone to wearing out and stopping to work and/or (in worst case) cracking (the blade allegedly cracked inside keyhole).
How much did you pay for blade copy service?
They asked 40€ at my place, and refused to engrave into "ebay/china sourced" key fobs. They offered whole new blade for mentioned price.
Hello. I haven't had any problems with the key blade during this time, and the case holds up well. I paid about 10 euros to a key workshop in my city to cut the blade.
Salut Adrian.Multumim pentru video-urile despre Peugeot -foarte informative.Tocmai ce am cumparat si eu de pe Aliexpres o cheie si as vrea sa merg la un centru de chei pentru copierea lamelei.Imi poti spune orientativ cat te-a costat pe tine aceasta operatie?
Salut. In Tulcea a costat 50 lei. Multumesc pentru aprecieri 🙂
Hi. Can you tell me is signs on open lock keys still visible after almost year of using?
Hi. This picture on the case is from today:
photos.app.goo.gl/V3aKQnGkVpBzimoC8
@@AdrianDragan Great. Thank you.
Hello Adrian, my case is beginning to come apart for my Peugeot 208 fob. My blade is working fine- can I just transfer my blade into the new key cover? Many thanks.
Hi. If it is the same type of key case it should be compatible with the new case.
@@AdrianDragan Many thanks Adrian, I greatly appreciate you getting back to me. Thank you for the informative video.
Hi Adrian, i replaced the key case, but i found that the buttons doesn't fit like on the original key case. Do you have a problem when press the buttons, it doesn't work very well when i press in the middle of the button, so i need to press more to the edges?
Hi! For me, the buttons work ok, maybe I have to press a little harder but I don't mind.
can you point me the link where i can buy this shell? I bought the same one on ebay but it doesn't work My key is a ce 0536
Hello. Look here:
links:
CE0536 Key Case For Peugeot 107, 207, 307, 308, 407, 607, 2 Buttons, : www.aliexpress.com/item/33030800272.html?aff_platform=portals-tool&sk=_dYBlQZa&aff_trace_key=0b2fb5a50f1546eaacbfea851861f0e3-1597350921526-00990-_dYBlQZa&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=0b2fb5a50f1546eaacbfea851861f0e3-1597350921526-00990-_dYBlQZa
CE0523 Key Case For Peugeot 107, 207, 307, 308, 407, 607, 2, 3 Buttons : www.aliexpress.com/item/33042115570.html?aff_platform=portals-tool&sk=_dY4sDHm&aff_trace_key=95bc8d2212854f0f8fd2b49e2d147206-1597351074585-01007-_dY4sDHm&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=95bc8d2212854f0f8fd2b49e2d147206-1597351074585-01007-_dY4sDHm
@@AdrianDragan Thank you very much Adrian, I'll try to get it because I really like this new key. I follow your videos which are always interesting.
Sincronizarea cum se face va rog de curând am facut o cheie si nu merge nici cum sa o sincronizare sa inchui masina
Salut! Daca ai cumparat carcasa cu partea electronica (telecomanda) va trebui ca aceasta noua cheie sa fie codata cu cifrul (codul) de siguranta al masinii. Aceasta operatiune se face doar cu unelte speciale si de obicei e recoamdat sa fie facuta in reprezentanta. Mai sunt si "baieti" pe la magazinele de chei care fac copierea cheilor (inclusiv partea de codare) dar se poate intampla ca uneori sa ramana erori in urma operatiunii sau chiar sa nu mai porneasca masina.
where u find it with peugeot logo back off key
Hello. I received the key case with the lion logo in the package.
Am comandat si eu e foarte misto fata de aia veche
Thanks for uploading the video. Very good.
I orderd this key also, went to a Peugeot specialist to programme it but the buttons don’t work. The key opens and starts the car But the buttons don’t work. I have a 207cc cabriolet
Hi. I guess you bought the key case + the electronic board. Unfortunately, I don't know how to program the electronic key.
Am un 307 sw din 2002 are cheie normală problema este ca asa vrea briceag, ca nu mai sparge buzunarele,nu se mai agata aiurea.E cheie rotundă. Pot muta pe briceag?Mulțumesc
Salut! Ai cheiea cu cele doua butoane pentru inchiderea centralizata?
Adrien, boa tarde. Não sei qual é a chave correta para o meu 308 SW 2009, a chave atual diz ser CE0536 3 botões. Podes ajudar-me? Obrigado.
This is probably the key case you need, but also check the type of blade that has your key: www.aliexpress.com/item/4000133576855.html?aff_platform=portals-tool&sk=_dY4sDHm&aff_trace_key=2cc1c55e0e8e4ff4b859acd55f40c3d1-1593445020403-06354-_dY4sDHm&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail&aff_request_id=2cc1c55e0e8e4ff4b859acd55f40c3d1-1593445020403-06354-_dY4sDHm
Eu am doar cheia, fără carcasă...deci nu am o carcasă veche, aș putea oare să montez cumva o carcasă nouă pe cheie?
Salut. Sa inteleg ca ai o cheie model fara telecomanda?
@@AdrianDragan Cheia mea, am impresia ca arata ca cea de la finalul clipului tau, care este copiata
Hi from France 😅, can you tell me how to know if it's a 0536 key or 0523 key , please?
Hello. It is the difference to the battery holder on the electronic board:
CE0523: ae01.alicdn.com/kf/HTB1.DUdVgDqK1RjSZSyq6yxEVXai.jpg
CE0536: ae01.alicdn.com/kf/HTB1vOoiVbvpK1RjSZPiq6zmwXXaG.jpg
Compare it with your key and see what model it is.
@@AdrianDragan thanks you very much
Hallo Ich habe gefragt, ob dieses Experiment mit Peugeot 407 Modell 2005 SW erfolgreich ist hat 3 Tasten in der Taste bitte beantworten Sie meine Frage Ich wünsche Ihnen Erfolg immer danke
Hallo. Das 3-Tasten-Modell sollte zu Ihrem Auto passen.
maybe sometimes the engine don’t works for the new printed key? what can i do if this happens?
Hi. The key transponder chip may not work properly, my key had this this problem for a long time ua-cam.com/video/Dz9D-JvBmjo/v-deo.html
Nice video, can you please tell me what is the name of the machine you used for the key thank you,
Hi! I didn't do that blade cutting. I went to a key shop and there I filmed the work. I don't know to tell you the name of that machine 🙂
What is the material of the lock and unlock buttons? Are they the same rubber material that disintegrate with the sweat of your fingers?
The buttons are made of plastic, I think they will be durable over time, the whole case is very solid.
@@AdrianDragan do they sell it with the internal electronics. Do you have any contact information of this seller to send them pictures of my remote and internal electronics
@@arm2644 Hi. You can send him a message from the page where you found the product that interests you.
I can't find the key fob with a Peugeot logo on the backplate. Are they out of stock?
Hi. Theoretically, the cases come with the Logo even if it does not appear in the pictures. Did you ask the seller and he said he doesn't have a Logo?
@@AdrianDragan you are absolutely right. Ordered one and the logo was there and all. Thanks a lot!
Thank you so much, perfect 👌🏻
I just got the Key , but I read something about a Key code, do i need to code the new Key or like se use the old eletronics you dont need to do nothing
Hi. Use old electronics and you won't need any code.
ME GUSTARIA SABER SI SE PUEDE HACER UNA COPIA DEL CITROEN C5 1
Hola. Si tiene el mismo tipo de llave antigua, encaja.
Can I install the old blade to the new case?
Hello. Nope, the old blade does not fit with the new blade in the holder.
Cumva lama de pe cheia noua e mai lata decat pe cea veche?
Salut. La mine este perfecta.
Salut. Faptul ca lama pe cheia de pe Ali e "plata" si nu pe "cant" cum cheia originala nu creaza neplaceri in timpul pornirii/opririi motorului?
Nu prea inteleg clar intrebarea. Te referi la latura ingusta a lamelei care are (sau nu) acel canal?
@@AdrianDragan Daca faci o comparatie intre cheia original si acea de pe Ali vezi ca lamele sunt la 90 grade una fata de alta. Acest lucru am in vedere, nu te deranjeaza cand o folosesti?
Nu deranjaza absolut deloc. Cheile sunt perfect compatibile.
Hi friends. I bought the same for Peugeot 407 CE523 VA2 Blade. I bought three different models from three different vendors. But my car electonic anti theft faulty it is malfunctioning. The car not working. I think immobilizer stating away from key not contacting.what should I do?
Hello. If you put the electronic board back in the old case, does the immobilizer become functional?
Very useful video, My key has been in a poor state for months now. Thanks to you I've finally gotten around to do it. Would this work with 307cc too? or do i need to get a key cover from another link?
Hi! If the old key case is the same as mine then you have to buy from my links. Check the key blade type and key type (CE0536 or CE0523).
@@AdrianDragan thanks for the advice. Unfortunately, when I bought the key, same battery type and blade type, i took it to the local key cutter, the key won't turn the ignition on. I think I give up with this one
@@britishpole6632 But does the old key case work?
@@AdrianDragan the old key works alright, without the chip the car wont start (obviously), but the new one won't even turn. I can lock the side compartment with the new key no problem though, so maybe I bought the wrong key after all
Very useful video, CONGRATULATIONS!
I would like to ask you a question: my old case has 2 buttons, but if I buy a new case with 3 buttons, could I use the third button to remotely open the boot lid?
(If the electronics of the case allows me to do this, I could activate that functionality, via Diagbox). Thanks in advance!
This is a good idea, but I don't know if it's possible ...
@@AdrianDragan Ok, thanks for your fast answer!
this is very possible, I have done it on my 307 restyle, now I can open bootlid remotely with 3rd button
@@denic4553 Many thanks!
@@denic4553 This is good news, I will buy a complete key with 3 buttons to see if I can make it functional. How did you pair the new car key, use Diagbox or go to a local dealer?
Mersi de video! Chiar ieri ma gandeam sa comand asa ceva :). Sunt curios daca se poate face din diagnoza doar deschiderea portbagajului precum la 508. Atunci s-ar merita cumparat cheia cu 3 butoane.
Nu cred ca se poate face deschiderea portbagajului din cheie...
Eu am inteles ca se poate . Dar e in functie de modelul masini. Si trebuie selectat in diagbox
@@Gr8boy Nu exclud acest lucru, probabil trebuiesc facaute niste codari in Diagbox.
Hi Adrian, thanks for sharing your experience. Did you engrave the new blade by yourself? Do you know which model of machine was used to engrave? Thanks again!
Hi. I don't have a key blade engraving machine. I went to the key store and there he made a copy of the original blade.
I think you can also find on Aliexpress machines for duplicating keys: www.aliexpress.com/item/4000405860516.html?aff_platform=shareComponent-detail&sk=_d8ry4GO&aff_trace_key=6b3ffa4e93004c968fb0ac9ac29b3077-1599120962787-09410-_d8ry4GO&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail
@@AdrianDragan Hi, yeah i saw so many machines on aliex. at different prices but when i watched your video and the engraving process i was surprised because it was so clean and "seems to be" easy to do. Anyway thank you again for your video and for your quick reply!
As vrea sa vad si la cele cu bateria pe placa
Salut. Operatiunea este aceeasi indiferent de felul in care se fixeaza bateria.
Could you possibly do one for Peugeot 206..?? 👍🏻😎
Hello. What type of key do you have at 206? Is it foldable or simple with two buttons?
@@AdrianDragan Two buttons one to lock the car and the top button to alarm the immobilizer
Thank you for the video.. i will definitely buy one of these.. i notice you have a nice menu on that mekede dvd.. is it an application that you've installed?
Hi! It's a launcher installed from the Google Play store, it's called CarWebGuru Launcher and you can find it here: play.google.com/store/apps/details?id=com.softartstudio.carwebguru
In the future I think I will make a video about this launcher, it is my favorite.
Am uitat cheia in buzunarul blugilor pe care i-am pus în masina de spalat. Ce pot face ca sa refac funcțiile cheii de la Peugeotul meu 207?
Salut. Nu stiu in aceasta situatie cum poti repara cheia. Incearca la un centru de copiat chei, sper sa te poata ajuta.
Does this work for Peugeot partner please?
Hello. If you have the same type of key case, it will work.
salut. am comandat si eu carcasa noua pt un 407. dar nu se potriveste placa in ea, eu am cu bateria pe placa dar nu asta e problema. la cea noua distanta intre butoane e mai mare decat la cea veche. eu am cu 3 butoane. unu il apasa dar celelalte 2 nu vin unde trebuie placa fiind mai mica
Salut. Din pacate nu prea cred ca am cum sa te ajut, eventual intreaba vanzatorul despre aceasta problema. Fa niste poze si trimite-i pentru a vedea problema.
Lambang kunci pada meter buat keta tak dapat start..bagaimana cara untuk baiki
Adakah kereta bermula dengan kunci ganti?
hola Adrian, hice una copia del espadin por AliExpress pero me equivoque en la carcasa ,el caso que probando el espadín abro la puerta pero cuando quiero arrancar el coche me dice llave incorrecta.
a que se debe esto?
Gracias
Hi! Can't turn the key on or make an error like in my video? ua-cam.com/video/Dz9D-JvBmjo/v-deo.html
Gracias, como siempre
Hola, si no metes la electrónica original de la llave sale ese mensaje y no arranca el coche, una vez la pones en la llave funciona. Yo antes de hacer el cambio hice la copia en el espadín y fui a probar el coche para ver si funcionaba. Se abría el cierre centralizado (cosa que hace pensar que la llave estaba bien copiada) pero el coche indicaba que había un problema en la llave y no arrancaba. Una vez instalada la placa del mando viejo dejó de hacérmelo.
Gracias, ya lo tengo solucionado, al poner la placa electrónica del mando viejo
Sent message to keyyou to clarify if they come with logo as i ordered one and it didnt have logo or insert to place it in like your video
Hi. As you can see, my key came with a logo and a place to insert it. Did you get a reply?
Yes sending me new 1
Hi very good video.from where you taket which this logo in cover plastic?
Logo on the key cover you get with the key.
Very clear explication ! 👍 good video thank you
Is it possible to transfer old key blade to new housing?
Hi. Theoretically it is possible but you have to make the blade thinner where it enters the support. I said it was too hard and I preferred to cut the new key.
in cazul meu un peugeot 5008 (2015) bateria e pe placa . iar lama e HU83 in schimb nu cred ca vanzatorul are carcasa placa cu bateria incorporata s-au ma insel?
Salut. Am eu doua carcase pentru modelul cu baterie pe placa electronica, cu lama HU83. Le-am comandat mai demult nestiind de treaba cu suportul bateriei. Daca te intereseaza contacteaza-ma pe pagina facebook.com/psadiyrepairs/
@@AdrianDragan ma intereseaza dar problema ar putea fi distanta.
Din ce am vazut la vanzator .. nu ma pot asigura îndeajuns am codul CE 0523 ..
Imi place formatul carcasei si daca vine si cu logo ca la tine e ok. Dar ce ma retine sunt pozele care arată gaura aia de la baterie ( într-adevăr e mai mica)
Tu la cele care nu le folosesti cum ai ?
Eu sunt in zona Barcelona ca locație dar macar imi fac o ideie .
Masina e din 2015 iar cheia e cea standard ca si la tine in video dar bateria pe placa
Salut, mai vre-o carcasa cu lama hu83 cu bateria pe placa? Din cele 2?
@@catalinc8693 Salut! Uite aici: www.olx.ro/oferta/carcasa-cheie-peugeot-model-upgrade-ce0536-hu82-IDdNziw.html
Salut!Pot sa pun lama veche la cheia noua?
Salut. La mine nu a mers sa pun lama veche pe cheia noua.
@@AdrianDraganCrezi la merge la opel?
Nu merge la Opel.
Hi Adrian! Thank you for this and all your other informative videos. I've ordered the new key case for my 207, expecting it to arrive soon. :) I wanted to ask you about one thing I'd heard related to the battery and electronic board removal during installation. I heard that there is a certain amount of time within which you can keep the battery and electronic board apart (something like 30 seconds) and that if you go beyond this time, the key will not work anymore. Do you know anything about this and did you have to adhere to this time limit when assembling the new key case? It would be good to know, the last thing I want is for the key to not work anymore. Thank you very much in advance! :)
Hello. This is the first time I've heard of such a problem. However, to be pessimistic, it would be good to try not to keep the electronic board without a battery for too long. I can say that I left about 5 minutes without the battery and it works perfectly, without problems.
@@AdrianDragan Multumesc for the reply and advice! :)
Foarte frumos clipul
Multumesc!
Dc se cumpara un cip d cheie d p alyexpress,corespunde cu cipul vechi sau trebuie soft-at
Odată cumpărată cheia vine cu un Cip universal se poate cumpăra și separat dacă ai deja carcasa dar e mai convenabil sa o cumperi cu totul , acesta trebuie programat după codul mașinii , apoi urmează rescrierea cheii in calculatorul mașinii .
In urma resoftarii calculatorului cheia de rezerva este stersa și ea din calculator , prin urmare de fiecare data când adaugi o cheie noua și vrei sa fie toate funcționale , trebuie înscrise pe rând toate cheiile in calculator pentru a le recunoaște pe toate . Treaba asta se face cu un aparat din câte știu eu și sunt multe persoane care pot sa facă asta . In cazul meu durata împerecherii ambelor chei (aceasta și cea de rezerva ) a fost scurta . Depinde de experiența celui care îți face împerecherea . Eu am vrut sa am ambele chei funcționale in cazul in care pierd cheia .
In cazul lui Adrian Drăgan nu știu cum s-a procedat dar bănuiesc ca in același mod .
Wil any locksmith/key shop? Cut car keys? I know several local shops that do house keys etc, but i am unsure if they do car keys like these..? Probably..?
Hi. You have to try.
Hi,
I have a question regarding the PP2000 DiagBox Lexia 3 diagnostic tool. 🤔
Is it true that with that item you can also program virgin key transponders (from a regular key or remote key fob) or basically add the new virgin transponder info to your car's computer ? 😉
A tutorial on this would be super neat.
Thanks ! 😏🖒
Best Regards,
Hi,
Yes it is true. But you need the security card with a PIN for your car. You should have this card or ask for it at your Peugeot dealer. I noted on the to-do list such a tutorial.
@@AdrianDragan Yeah but that card is costly to obtain. I didn't get mine when I bought the car used. 😶
I heard that there are even websites where you just input/supply your VIN code & you get in return the 4 pin digit code for free. 😇
@@davidbolha Tell me that site too because I don't have a PIN code either :D
@@AdrianDragan Have a look at this:
- mhhauto.com/Thread-Peugeot-Citroen-PIN-From-VIN
Or search (via DuckDuckGo) for keywords: "Peugeot VIN to PIN"
I don't know how many of these websites or forums are still active though. 🙄
Now here you have some links to tools/readers:
- blog.carkeydeals.com/what-is-the-best-citroen-peugeot-psa-pin-code-reader/
- obd365.eklablog.com/read-peugeot-408-pin-code-and-program-key-by-obd-a132358974
However I have no idea if any of these are reliable or even if they work as advertised. 😕
@@davidbolha if this work tell to me. My dealer didn't want to share the PIN with me. He tell me that PEUGEOT forbidden access to this codes nowadays.
Do buttons work as well?
Hi. Yes, work great!
i take out the key blade and the end is different.. old blade dont fit in the new keycase.. so i need to put it back and still need to go to the keyshop 😅
This looks really good and easy. I have a Berlingo which has the same parts as the C4. So the key should work also.
4 Dollar for cutting the key is almost more expensive than the case itself. 😂😂
You cut the key yourself at the dealer. Is there a reason not to have it cut via internet? Any opinions on that?
Hi! It's not expensive $4 to cut the key, at the key workshop in my city I paid $12. I wanted to film how to cut a key and for that I paid :))