Car starter chance, Peogeot. How to / DIY

Поділитися
Вставка
  • Опубліковано 13 гру 2024

КОМЕНТАРІ • 57

  • @pawewisniewski2189
    @pawewisniewski2189 8 місяців тому +2

    You are amazing. Without your video, it would have been impossible for me to do this. You are a wizard mechanic to me. Great movie. Thank you very much.

    • @HEMIkkoDIY
      @HEMIkkoDIY  8 місяців тому

      Thank you, glad if it helped 👍 i think this is the best combliment i have ever had 🫡❤️😄

  • @zizoclever
    @zizoclever 8 місяців тому +1

    Good job bro. I will attempt changing this tomorrow. If you raise the car on jack stands, you can remove the bridge from under and do it from there but that's a LOT of work too. I got the starter cheap 70 euro new Jakoparts Herth+buss but seems like getting the part isn't the problem. Putting it in is gonna be a pain.

    • @HEMIkkoDIY
      @HEMIkkoDIY  8 місяців тому +1

      It would be nice to have more space and yes, it would help to remove the bridge (if the bolts are not too rusted 😄)
      It's a bit tricky, but you can do it 💪

    • @zizoclever
      @zizoclever 8 місяців тому

      @@HEMIkkoDIY bro update i am 5 hours into the job, I GOT FCKED lol. I had to remove the whole air intake to gain access from above because this car has lpg installed also so extra cables in the way couldn't do it your way.

    • @zizoclever
      @zizoclever 8 місяців тому +1

      @@HEMIkkoDIY the fcking intake bro had 7 screws. Especially the middle inner one almost gave me cancer lol, had to get it from the intake opening in the middle. Anyway, I'll sleep now and I'll get out the starter tomorrow. I'll update later, us mechanics should stick together, it's scary alone 😂

    • @HEMIkkoDIY
      @HEMIkkoDIY  8 місяців тому +1

      @@zizoclever oh man 😔 it was a shitty job anyway. But when you get it done... you wont do it again 😄

    • @zizoclever
      @zizoclever 8 місяців тому

      @@HEMIkkoDIY bro i just pray to God that the problem is the starter. The car suddenly didn't start-no crank, just clicks. Battery and alternator are good, fuses are good, the ignition switch is unlikely to be the problem because i hear the click, so what do you think, probably the starter right?

  • @paddysloan
    @paddysloan 2 роки тому +1

    Great video. I was contemplating trying this change myself, I won’t be now. Looks a right pain!!

    • @HEMIkkoDIY
      @HEMIkkoDIY  2 роки тому

      😄. Very tight place 🙄 would be easyer if you could lift the car up 👍

    • @politicalfoolsandhorses
      @politicalfoolsandhorses 2 роки тому +1

      Me too. I have the tools and was going to attempt this today when something told me why not have a look on U tube. No way.

  • @HENEKETT
    @HENEKETT Рік тому +3

    I think this is a Peugeot’s revenge on DIY people:)

  • @zizoclever
    @zizoclever 8 місяців тому +3

    I promise taking out the engine is easier on this 207 than the fking starter 💀

    • @HEMIkkoDIY
      @HEMIkkoDIY  8 місяців тому +1

      🤣 you might be right

  • @libran3051
    @libran3051 4 роки тому +2

    Helpful video thanks!!

  • @anthonyBerrigan
    @anthonyBerrigan 2 роки тому +1

    excellent video very helpful danker

    • @HEMIkkoDIY
      @HEMIkkoDIY  2 роки тому

      Nice to know 👍 thank you

  • @h_nature_matenou7983
    @h_nature_matenou7983 4 роки тому +1

    I removed starter from my car peugeot 3008 petrol. You are right it was horrible. Took a day.

    • @HEMIkkoDIY
      @HEMIkkoDIY  4 роки тому +1

      Yes 😆 Its a lot more work than i thought.. Was it in the same place than this one? Dont think that im doing it again wit this car 😉

  • @looneyrooster830
    @looneyrooster830 4 роки тому +1

    Job well done... I have this to look forward to 😥

    • @HEMIkkoDIY
      @HEMIkkoDIY  4 роки тому +1

      This is a tricky one 😁 i have More videos coming from the problem shooting for this car 😉 but its pretty realible 💪

    • @looneyrooster830
      @looneyrooster830 4 роки тому +1

      How much would this cost at a garage

    • @HEMIkkoDIY
      @HEMIkkoDIY  4 роки тому +1

      @@looneyrooster830 if you look from google, it says the average cost is about 200 euros. I dont know if it includes the starter...

  • @xyzspec82
    @xyzspec82 10 місяців тому +1

    Tomorrow is my turn... Wish me luck 💥🤓

    • @HEMIkkoDIY
      @HEMIkkoDIY  10 місяців тому +1

      Good luck 😄 hope everything goes like it should 👍 💪

  • @rhandymarquez
    @rhandymarquez 3 роки тому

    thanks for sharing my friend...i know its really hard taht work but in the end you fix it.

  • @DillyVesper
    @DillyVesper 4 роки тому +1

    Itellä ei pidä kuin releiden naksutusta. Onpa hankalassa paikassa startti.

    • @HEMIkkoDIY
      @HEMIkkoDIY  4 роки тому

      Ensin poltti sulakkeita, mutta lopulta ei toiminu ollenkaan 😔 tuo oli kyllä niin käsikopelo hommaa että ei kiitos enää ikinä 😆 kiitos kun katsoit ja kommentoit 👍

  • @Germimusic
    @Germimusic Рік тому +1

    Thanks bro 🙏🙏 … now let’s get to work 😢

    • @HEMIkkoDIY
      @HEMIkkoDIY  Рік тому

      No problem 😄 good luck 👍

  • @willo219
    @willo219 4 роки тому +4

    thanks for the video, I need to do this to my girlfriends 207 1.4 16v, it looks like a pain the ass to replace :( !

    • @HEMIkkoDIY
      @HEMIkkoDIY  4 роки тому +3

      Yes, it was 😉😁 this was a learning for me, so, good luck 👍

    • @willo219
      @willo219 4 роки тому +1

      @@HEMIkkoDIY any tips? I took the air filter box out and still couldn't see it at all, how did you manage to reach the 3 bolts and removed the positive and ground cable?

    • @HEMIkkoDIY
      @HEMIkkoDIY  4 роки тому +2

      @@willo219 just by touch. its very hard to get place, so you really dont see the wiring 😔. I didnt see the lowest attachment Bolt nether... This one took a while to replace

  • @drewstonsinger
    @drewstonsinger 8 місяців тому

    What size Allen key bolts?

    • @HEMIkkoDIY
      @HEMIkkoDIY  8 місяців тому +1

      Sorry but cant remember that there was any allenkey bolts 🤔(it's been 4 years). Just 3 normal bolts and i think the tool was 13-15mm , not sure about that ether 🙄

  • @zare721
    @zare721 3 роки тому +2

    Nice video man.
    In few days i will change my starter.
    Fck it let's do it 🤣

    • @HEMIkkoDIY
      @HEMIkkoDIY  3 роки тому +1

      🤣. This was so fun thing To do 🙄 wish you luck, its pretty tight place 👍

    • @zare721
      @zare721 3 роки тому +1

      Thx i need it 😅🤣

    • @zare721
      @zare721 3 роки тому +1

      I hawe replace it. I dont know i am not profesional. But all is finished in about one ahour. 😁
      And the more important thing is that my old one is still in funkcion. I just give him little black fat. 😃

    • @HEMIkkoDIY
      @HEMIkkoDIY  3 роки тому +1

      @@zare721 good job man 💪 with right tools its pretty easy 👍 I spend More time To search for tools than the actual starter chance 😁

  • @muskyb7180
    @muskyb7180 3 місяці тому

    Bro I’m skinny and I could barely fit my hands in there how you doing it 😂😅

    • @HEMIkkoDIY
      @HEMIkkoDIY  3 місяці тому

      @@muskyb7180 😄 its really tight place, but mayby im skinnyer 😉

  • @bessiebraveheart
    @bessiebraveheart 4 роки тому +1

    It used to be a dead easy job. A few minutes. Why do they do this to us?

    • @HEMIkkoDIY
      @HEMIkkoDIY  4 роки тому

      🤣 True 👍 can you even chance starter nowdays without calibrating it with computer 🤔😁

  • @ianstyles9759
    @ianstyles9759 3 роки тому +1

    Oh shit no way am j going to fix this car I have 207 sw it is click click click lol help meeeeee

    • @HEMIkkoDIY
      @HEMIkkoDIY  3 роки тому +1

      Check the fuses under the bonet, i think theres at least one 20A fuse burned... then the trouble starts 😁

    • @ianstyles9759
      @ianstyles9759 3 роки тому +1

      @@HEMIkkoDIY aye mate and might give starter a bang to fix the sticky from holding, but just getting to it is a right pain, Nice job for Sunday eh.

  • @hubertbrunner2915
    @hubertbrunner2915 3 роки тому

    What a waste of time to watch this.

    • @HEMIkkoDIY
      @HEMIkkoDIY  3 роки тому +4

      Why? Thats how i did it 🤭