I have been struggling with 50/50s on ledges for a while now. I always wondered how I was supposed to place my weight! Thank you so much for another awesome tutorial :)
I’ve been wanting to practice front side 50-50s. I’m left foot dominate but I prefer my left foot in front. I wonder if it would help if I practiced with my dom foot in the back 🤔 Thanks for sharing!
I heard of quite a few people who have their dominate foot at the front. I would try and first balance on your dominate foot and then look to place your other foot. So the same technique but switch the back to the front foot. It might be easier than switching dominate foot?
I really love your tutorials they are always so well explained and clear!☺ I was trying to get more into my ledge grinds and I found your balance and skate placment tips super helpful. However, when I was trying to get grinding my kingpin kept getting stuck on the ledge almost making me fall and also making a horrible screeching sound. Has something like this ever happened to you, or do you know what I could try to make that stop? Some ideas I had what could cause it is the ledge not being waxed enough or my slide blocks being too small.
Do you have grind trucks on? If you do wax the ledge it will help the kingpin glide over, but you don't really want your kingpin to be hitting the ledge or coping as it can get damaged and hard to change out your trucks later on.
@@ShortysSkateSeries Thank you so much for answering!😊 Actually, I don't know. I have the original trucks of my skates on there (Powerdyne Thrust). I will look into that a little further. Do you have any recommendations for grind trucks? I also thought that maybe my slideblocks are too small as the kingpin still sticks out at the bottom.
Hi! Love your videos thx!! I have a 2.5 truck and I don’t know if use smaller conical inside edge wheels or flat rollerskates wheels but bigger :( any recommendation? I’ve been having bite problems
So smaller wheels will help as it means the angle at which your grind trucks balance on the corner is lower than if you use bigger wheels. Also a rounder inner wheel edge will roll better at an angle then a straight edge wheel
So depending on if your block is low enough you might not need them to do the trick. On narrow trucks you will be rolling on the wheels and probably sliding along on your block not 'grinding' on your trucks. Also on narrow trucks you have to be more accurate in landing. Here is a clip on me 'grinding' with narrow trucks. ua-cam.com/users/shortsmA2IIME-TQQ?si=4RPwkNaskEgPoG2Y
I have been struggling with 50/50s on ledges for a while now. I always wondered how I was supposed to place my weight! Thank you so much for another awesome tutorial :)
Happy to help!
You are the best teacher. No one explains or shows step by step like you thank you for being really detailed. ❤
Thanks. It's how my brain works. I like to be efficient and not work harder than I have to 😅
Thank you for always creating great high quality content training video for us to learn from you. Keep up the great work! You are the best!!!
Thanks! I will try.
I've been trying to get this one for awhile. These are some really helpful tips!!
I'm so glad!
exactly what I’m working on right now
👍
love these videos,saving this! thanks shorty!
Glad you like them!
Thank you so much! I was having so much trouble with how far my foot needs to be on the ledge🙏
Yes balance it the hardest but the better the balance the easier it is.
thank you !! 🎉
You're welcome!!
Thanks you so much ❤
You're welcome 😊
Tried this today before I watched the video, hopefully I'll land them after watching ^.^ Thanks for the tips
You're welcome!
Great video as always! Thanks, i needed information for where to put my weight
Glad it was helpful!
Thank you so much shorty!
You are so welcome!
I’ve been wanting to practice front side 50-50s. I’m left foot dominate but I prefer my left foot in front. I wonder if it would help if I practiced with my dom foot in the back 🤔
Thanks for sharing!
I heard of quite a few people who have their dominate foot at the front. I would try and first balance on your dominate foot and then look to place your other foot. So the same technique but switch the back to the front foot. It might be easier than switching dominate foot?
I really love your tutorials they are always so well explained and clear!☺ I was trying to get more into my ledge grinds and I found your balance and skate placment tips super helpful. However, when I was trying to get grinding my kingpin kept getting stuck on the ledge almost making me fall and also making a horrible screeching sound. Has something like this ever happened to you, or do you know what I could try to make that stop?
Some ideas I had what could cause it is the ledge not being waxed enough or my slide blocks being too small.
Do you have grind trucks on? If you do wax the ledge it will help the kingpin glide over, but you don't really want your kingpin to be hitting the ledge or coping as it can get damaged and hard to change out your trucks later on.
@@ShortysSkateSeries Thank you so much for answering!😊
Actually, I don't know. I have the original trucks of my skates on there (Powerdyne Thrust). I will look into that a little further. Do you have any recommendations for grind trucks?
I also thought that maybe my slideblocks are too small as the kingpin still sticks out at the bottom.
Hi! Love your videos thx!! I have a 2.5 truck and I don’t know if use smaller conical inside edge wheels or flat rollerskates wheels but bigger :( any recommendation? I’ve been having bite problems
So smaller wheels will help as it means the angle at which your grind trucks balance on the corner is lower than if you use bigger wheels. Also a rounder inner wheel edge will roll better at an angle then a straight edge wheel
Hi! Looks so cool) Do you grind on axels? Or on grind block? Can't see it properly on video.
In this video on axles. I have the Bont 2.3" grind trucks
Do i need to have wide trucks for this? I wanna get into it but everybody saying i gotta upgrade
So depending on if your block is low enough you might not need them to do the trick. On narrow trucks you will be rolling on the wheels and probably sliding along on your block not 'grinding' on your trucks. Also on narrow trucks you have to be more accurate in landing.
Here is a clip on me 'grinding' with narrow trucks. ua-cam.com/users/shortsmA2IIME-TQQ?si=4RPwkNaskEgPoG2Y
Are you using wax on the ones you grinded the whole ledge
I didn’t add wax but there was a bit on wax on there.
厉害呀,什么样的鞋都能玩
This are Bont Parkstar roller skates
glad this got dropped. next is round rails 50-50.
I prefer rails!
Odd to see such an empty skate park
If you go in the morning on a weekday it really is. 😂