Disconnecting Sway Bar on F-150: Articulation Test
Вставка
- Опубліковано 28 сер 2024
- Support the channel by using our Amazon Affiliate Link: amzn.to/3yPirhM
This is a follow-up video to my installation of the Sway Bar Disconnects I got from 4crawler.com which can be found here: www.4crawler.c....
My original video can be found here: • Universal Sway Bar Dis...
There was a significant increase in articulation once the sway bar was disconnected. Overall, I am pleased with how the disconnects are performing.
This is the nerdiest, yet most awesome thing I've seen
No sway bar = fun
@@NSQGarage my '13 5.0 may need this... soon...
Where were your measurements taken from? I have a forklift at work and can really flex the truck
@@BeaudoinMotorsports I measured from the ground to the lifted tire. If you had a forklift, you would just keep lifting until the rear tire starts coming off the ground
@@NSQGarage Yeah, that's what I figured I would do with the forklift, try and match all those "Jeep Bros" out there. but cool, if I get around to it this week, I'll let you know what I measure out
@@BeaudoinMotorsports that would be awesome. As you saw in my test, I ran out of ramp so I couldn't get a final number!
How is it with no sway bar for daily driving and highway? I know a guy who did it and said didn’t notice a difference and now he does break links all the time like mine does with a 2 inch lift
It's super cushy with no sway bar. It is a little unnerving when taking a corner with some speed. If I was only driving in town with rough roads, I would say no sway bar. But the higher speed stuff seems more risky.
@@NSQGarageis there any videos or info you know of about removing the sway bar? Just trying to see if i could do it in the drive way or not haha.
what wheel and tire setup are you running?
Method nv305s (17 in) with 35 x 12.5 bfg KO2s
Any rub with that set up?
Hello, So its been 3 years. Have you had any issues with your CV joints knocking or breaking while using your sway bar disconnects?
no cv issues luckily. however, the sway bar disconnects wallowed out and now rattle. i think a different solution would be preferred.
@@NSQGarage Awesome thank you for the quick response!
Who makes the quick disconnect? And can you do a short video showing the operation?
ua-cam.com/video/i_XI85xHVxI/v-deo.html
Hopefully that gives you a good idea