I would have preferred if they had painted the rifle, rather than use that swirly twirly silver plastic. I just tried tightening the screw on my VF-25 Alto Renewal (which is the floppiest of my DX Chogokins), and it worked well! Now his hip and shoulder joints are much firmer, but unfortunately the transformation hinge on his shoulder has no screw to tighten. But I put a blob of melted plastic onto the joint, and it gives it just enough extra friction to defy the pull of gravity.
I believe he just tightened those screws he points to here: 4:39 There's a screw under the shoulder joint too. I just tried it, and it works well! I don't know why I never thought to do it before.. my VF-25 has been floppy for years.
兔哥万代有几多台超合金机种？
Any online link to buy this one?
I would have preferred if they had painted the rifle, rather than use that swirly twirly silver plastic.
I just tried tightening the screw on my VF-25 Alto Renewal (which is the floppiest of my DX Chogokins), and it worked well! Now his hip and shoulder joints are much firmer, but unfortunately the transformation hinge on his shoulder has no screw to tighten. But I put a blob of melted plastic onto the joint, and it gives it just enough extra friction to defy the pull of gravity.
你個地台可以在哪處買？
How did you fix shoulder and leg?
I believe he just tightened those screws he points to here: 4:39
There's a screw under the shoulder joint too.
I just tried it, and it works well!
I don't know why I never thought to do it before.. my VF-25 has been floppy for years.
强烈要求萌兔大大开一集介绍一下你的飞机支架是怎么制作的！！
就是萬向表支架，底座是普通鋁合金塊，接口是3D打印的
请问支架那里买？ 🙇🏻🙏
总算有逆变视频了，之前25F变成人形我就变不回去了……
逆變幫了大忙，真少見逆變😅
看來還是買模型，一來較便宜，二來沒有因複雜的變形過程，三比較不會有不舉狀況。
這DX超合金一點也不複雜...
@@叱诧月海魚魚貓確實不複雜，不過dx合金系列都有各種各樣的問題，玩起來都比較鬧心，不知道30以後的套件有沒有比較好。
感覺拼裝模型因為是自己一步一步組起來的 對內部構造比較了解 比較敢變形 完成品每次折個關節都會怕怕的 尤其卡很緊的時候都會懷疑是不是扳錯 很怕弄壞零件
@@s0335 其實並不一定，比較複雜的模型如果不是組裝的時候就有意識的去確定結構和正確的施力點，最後也很容易會掰壞。
至於成品，如果有仔細看說明書的話出問題的几率其實很低，不過像小飛機這種在成品玩具里算比較脆弱的就確實要小心。
@@s0335 也是
不過比較耐操的還是DX超合金
雖然萬代的品控.......
VF 25系列，機頭和腹部的連接處都不用合金，那裡沒注意就有可能裂開
我27的機頭就是變成拔插式的了😭
好在能插著，變成人形還能塞進去
萌兔，想請問一下，你住日本
像VF-25G這樣開盒就發現關節鬆動影響把玩，是否可以向日本萬代申請售後服務，謝謝
可以，直接寄回去換新，但是鬆動這種小問題我自己弄一下也就10分鐘的事，來回寄的話短則一周長則一月，我嫌麻煩一般能自己解決的都自己解決了
是1/72嗎
千年老毛病了，為什麼不改做齒輪關節，雖然可動會變差一點，至少站的住，舉得起🤷♂️
齒輪關節，看向前陣子出的MB真蓋特1號，嗯...
這禮拜三要拿到實品了
希望狙擊槍不要是歪的....
真好奇戴萌兔總共有幾台呀? 全部都有?
看槍的湯口跟水波紋，以為是組裝模型
萬代的武器普遍都很隨便...我買MB系列除了本體都有塗裝，武器等配件有水痕都很常見，只能無視🙁
昨天在香港特價入了一台
我也訂了這台，希望不要有這些問題🥲
5:34
天線軟到歪掉。
@@rice121714 這應該無法避免
要就換硬的就好
@@rice121714 6:03 處也很明顯
@@panefans 真的只能換硬的
軟的必歪
好快阿
我的還沒發貨QAQ
25/27/29再不改關節
關節鬆軟依舊存在~~
29已經是比較有誠意的小改款了
只是同樣的誠意從25世界版以來沒有看到。
@@robis5394我的世界版25就沒這些改動
請教各位，所以目前是不是只有vf-31的髖關節是齒輪關節？因為，我買的vf-1j是軟軟的球形關節，機器人型態會軟腳！
@@賴俊吉-v3c 好像是這樣喔
YF-19他的關節好像也是球形關節
但設計和25系的不同
我最近拿到再版的19
手跟腳的關節都緊實
我在等RVF-25
31ax疾風機今日都賣999
咦？ 邊度？
@@royloi7669
精品
哇 RX782
你好，可以轉載一下嗎？
我昨天都999買了😅
之後代理都到貨再買，一直跳水，預定像個傻逼.....
近期有隻勇者王出得很好
我是受左腿詛咒的人嗎 怎麼跟25F一樣又裝不上大腿裝甲
我大腿裝甲跟你一樣裝不了一邊......
@@叱诧月海魚魚貓要加工下 磨具老化了 比25f要差一点…
这盒香港破发，一出当天就只卖港币999。
真唔真啊邊度有？
@@Tubeyouuuuuu精品
香港999
腳架槍。