Very possibly yes, I have noticed a very predictable pattern in that the first and second shot from the magazine are high and low respectively, then it gets very consistent, so I am thinking reducing the plenum volume is defiantly on the cards next as I don't think the regulator is resetting properly as it settles. Thanks for watching.
nice increase from a simple reg rebuild , have you thought about reducing the plenum volume by machining inserts for it ? , wonder how that would affect consistency
Good question, yep 42cc of plenum volume is far too much for sub 12 use, so I plan on making a Delrin plug to reduce the volume to around 10-15cc this should help with consistency and improve the shot count. Thanks for watching 👍
You can do that to get a very rough idea but, my rifle started to drop power a little before reaching the reg set point, I.e when the reg is set at 70 bar the power started to drop at 90 bar on the rear gauge, so you would have to be mindful of this.
Brilliant. Great results.
Time to dig out my autosol & have a go myself.
great video, love the gauge on the gun and the fill tester dodad you made.
Thanks glad you enjoyed it. Thanks for watching.
Another highly informative video. Could the discrepancy have been caused by the regulator settling under pressure?
Very possibly yes, I have noticed a very predictable pattern in that the first and second shot from the magazine are high and low respectively, then it gets very consistent, so I am thinking reducing the plenum volume is defiantly on the cards next as I don't think the regulator is resetting properly as it settles. Thanks for watching.
nice increase from a simple reg rebuild , have you thought about reducing the plenum volume by machining inserts for it ? , wonder how that would affect consistency
Good question, yep 42cc of plenum volume is far too much for sub 12 use, so I plan on making a Delrin plug to reduce the volume to around 10-15cc this should help with consistency and improve the shot count. Thanks for watching 👍
Nice, and it should get a little better as the reg beds in 👍👍
Yep more testing and fiddling on the way. 👍
Great video buddy!
Thanks for posting
Thanks for watching!
Nice video! Where can I find a spare regulator for this gun?
Not sure, you could try Edgun west or directly contacting Edgun in russia. 👍
@@sub12airgunners ok thanks, i try
👍👍👍👍👍
Can I just fire until the pressure drop to where reg doesn't open to know the reg setting pressure?
You can do that to get a very rough idea but, my rifle started to drop power a little before reaching the reg set point, I.e when the reg is set at 70 bar the power started to drop at 90 bar on the rear gauge, so you would have to be mindful of this.
Good work ~ Thanks for your efforts. 🥇👍
My pleasure, Thanks for watching 👍
Really well explained, thanks!!!
Good to hear, thank you 👍
Thank you
You're welcome. Thanks for wacthing.
Good results. 👍
Thanks for watching 👍
35 bar per 1/4 turn
Yep its quite repeatable, Thanks for watching.