Thanks for the video. Perfect step by step guide. IRT the CAI, on my 2017 SS, the canister is having a difficult time staying in the grommets. I recommend reassembling from the right to left (meaning put the filter on first). Oh and be careful removing the sound tube fastener. Easy to snap off. Very easy install.
Placed my order from the Gm parts guy after seeing your install video. I received it midweek and installed it today. It was pretty easy with the help of your install video. Thanks Matt !!!!!
I just installed this kit on my '20 LT1 and it definitely made a noticeable difference with better throttle response and enhanced engine tone. It did need the performance tune done at the dealership as my Camaro ran less responsive after the installation. My advice is get the tune done for the most power gain.
LethalGarage Yeah but then your left with an extra filter and your costs just for a CAI intake is going up to like $600. I live in one of the banned states much like you. Have you had to get an emissions test yet on your car? That would be an interesting video. Your car seems like it would be banned in CA.... LOL
LethalGarage I'd prefer to buy the CAI version and see if you can buy the lid that says GM performance. That might be tricky getting them to piece that part out though
I installed the Cold Air Inductions model - GM Performance one not available anymore - on 5/25/23. Found out that 2020 and newer 2SS models to not have the sound tube anymore. The kit does not come with the AC tube wrap anymore and only one of the “green” sound washers, not two anymore. They also say not to unplug the Sensor, to remove whole and install back in whole, unplugged will throw a check engine light.
Thanks for this video. I called the dealer and they were cool with me doing the install myself, I’ll go in for a tune in a couple days. I sort of had to walk them through the process others may find that their dealer is a little in the dark on this product. A couple points about install, first the instructions state not to unplug the maf sensor, instead they say to unscrew it from the housing and set it aside. Of course I read this after I already unplugged it. And the second point is that lining up the 2 holes is a little weird because they line up at and angle. I stuck a small drill bit in the filter box hole and used a rule to line up the hole on the maf housing. I was nervous about eyeballing it and it’s a little difficult to see if you’re on the right mark
Was reading in some forums that it's better to take it to the dealer and get them to install it because if something goes wrong they might just blame it on you.
Matt, any ill effects on the car since you installed it? On a previous video you mentioned that the V6 model should have the tune installed; wondering if the tune is really needed on the V8? Ready to place the order for my SS, told my wife its a birthday gift for me : >
so when you have cold air intake, does engine can pull the water inside and clog the engine? long time ago i use to own ford focus and some pre owner instal cold air intake and when i was driving on rainy day and after passing the pool the water get in my engine and it killed my car.... now i own camaro v6 2018 so i was wondering if just depends of what kind of cold air intake?
I just asked the same thing. Since it's dry I'm assuming you just bang that bad boy out and wipe it with a damp cloth but what do I know. I see you asked a year ago so if you know let me know so I know. ✌
Awesome video can’t wait to install one on my 2018 2SS just a note went to the merchandise store sad to see that ur T-shirts are sold out wanted to sport one while I drove my Camaro keep up the great videos
Will the throttle body still make the whistle noise if you have the vmax ported throttle body? the one you had an install vid for a while ago. Or do you still need the gaskets for that as well?
Yes, I did. I installed it after ur video, so no mistakes, lol. It has whistle sound, oil pressure gage goes high when I hit the gas pedal, and the radiator fans keep spinning very fast after I shut off the engine. All of the three things happened together at my first ride and shut off after installing the GM CAI. But the next day morning till now, all gone, everything works normally. Weird!!!
because it is pointless. The idea is that it ports additional intake sounds into your car to make you feel like you can hear your engine. with today's cars the padding and materials mute the sounds a lot. So this is a way to get some of the sound back.
LethalGarage I just mentioned the clippers because they have are blunt in the front and less likely to get into the insulation if the tie is very tight on the wires
LethalGarage Thanks bro just got it installed. Was curious as it didn't really feel oiled, and nothing on the install instructions said anything as far as maintaining or type of filter.
Sinister and David Rojas, It's not the parts (intake) that void your warranty, it's the tune. Your warranty 3/36 (or whatever you got) is based on factory tune. Simply put if you do proper maintenance according to manufacturer your vehicle will perform at least through warranty period. Think about this, you put a supercharger on this car... well take a look at the ZL1, it's supercharged correct? and that's topped off with a warranty based on factory tune. Not the parts, it's the tune. Ok barring turning it into a alcohol drag car... I'm just saying 😎 Like me at; ua-cam.com/video/4KspjmcVHwc/v-deo.html
I drive a camaro that I bought used and it had your logo and the “lethal camaro” logo in white lettering on the rear smaller windows. It’s a camaro lt fith generation 😊 just thought it was cool that I’m installing this same intake on my camaro and it happened to show your video in the google results now I watch your channel all the time 🤙🏼
I know you posted this awhile ago, but I wanted to say thank you for the guide. My brother and I installed this last night and your video came in clutch. Also mine came with a 50 state emissions friendly sticker so I'm good here in SoCal. Thanks again!
akidim13 Hey man, Naw, I didn't take it to a dealer. After reading up seeing that it didn't make a difference really, I decided not to. I notice more of a pull at 2k rpm and others have told me it sounds slightly more aggressive. Although, it's been a little while since I've driven it, so this is all based off of memory. I don't have any dyno results or anything like that so share, sorry. Best of luck with whatever you choose to go with.
Got the part from GM. Put it in and when I went to go to the dealer to get a flash, they said they couldn't do the flash because of the serial number of the part being wrong, even though the part was supplied to the dealer.
Great video, Matt! Looking forward to the completion of the 2nd gen. Camaro, too. Question for you regarding this CAI: Will this work on the 2020 SS 1LE that I bought in April? Looking up for my '20 brings me to everything from '16-'19. Thanks for any information you might have for me. Great channel!
LethalGarage Thank you for your reply. I’ll check in with my Chevy Service Manage, too, before I buy this one that you installed. I’ll let you know how it turns out.
I recently installed a cold air induction system on my 2016 Camaro 2ss and thought maybe something was wrong because It was making a sound like it was getting too much air or something, so I put my stock one back on and its the exactly the same. Is this normal? Here is 35 sec video of it. Thank you! ua-cam.com/video/fzdgw__GCio/v-deo.html
just got mine... easy install.. I found the spring loaded screws annoying as hell... couldn't get the screws to stay closed.. finally by the grace of god after messing with them for 30 min I finally got them to stay on. LOL. do the other brands have these spring loaded screws? to be honest, these screws seem like they aint going to last very long.. BTY... great vids man. like the way you go into detail. 🖒🖒🖒
Anyone by any chance got the part number or know how to get the Return PCV box on the stock intake. I never got the stock intake on my car as I bought it used and it had a CAI already. Can’t seem to find this little piece anywhere
Hey like your videos that you post especially this video been trying to find a cold air intake for my 2017 camaro ss but all are not California legal.. i checked out the web sight provided for the chevy performance part but it says in the website the same as all the other ones "not intended to use or sell in California" is there any cold air intakes that can be bought here and use in California??
Quoted from thatgmpartsguy.com "The provided Tune/re-calibration is for emissions purposes only and does not increase performance nor does this kit through a CEL. If your sole purpose is to maintain vehicle warranty and have this cold air intake, you must allow a GM dealer to use the re calibration code with the kit and re-flash your ECM."
IS there a listing for the 37 approved states? Is the tune for emissions only and if the tune is not installed will it fail emissions test? I dont know how much I trust a GM dealer to install this tune. Worries me a bit.
How does the tune make the intake comply with emissions? Does it inject less fuel or time the amount of air being sucked in, or does it make the spark plugs fire earlier with the intake?
@@Lethalgarage so it's worthless to option for this intake if yoy were to build it? I guess it makes sense because on the builders site, it says how it improves air flow but doesn't mention that hp or tq numbers are increased. So its probably best to keep the factory filter then get an aftermarket one so the tune is the same but u get more powee
M P I had the same problem and honestly ,I took mine out my tuner said the dealership didn’t tune my car correctly so that was the main problem ,it sucks cause I paid so much for it and fought the dealership they charged me labor off the roof $600 for installing an intake plus tune when it clearly says tune shouldn’t be a charge only labor so total $1200 but I argue with them and it got nowhere ,I went ahead and switched to RotoFab and E85 and said screw the warranty and man I love it
Thanks Matt for your install videos and honest views on these products. Today I received and installed my GM performance cold air inductions intake which was purchased from thatgmpartsguy.com, I used your video and not the provided instructions for the install. LOL. Love the sound and can't wait to take it back to the track to see the gains. My best stock run out of 4 runs was 12.645 @ 113.15. I'm hoping I can get in the low 12's, i guess i will see the results next weekend. Thanks again. -Sam
Yes... I worked in landscape for 6 years long ago and I can't shake calling the PCV line a PVC line.
LethalGarage from were did you buy it becaus i askpacepercormance they sad till now gm didnt releas it
LOL.
Product:
➤ ThatGM PartsGuy.com GMPP Cold Air Intake: bit.ly/2seL86a
LethalGarage how much horsepower did it gain
Say this fast 3 times: Positive Crankcase Vent, Positive Crankcase Vent, Positive Crankcase Vent. LOL I actually have to think about it too.
Thanks for the video. Perfect step by step guide. IRT the CAI, on my 2017 SS, the canister is having a difficult time staying in the grommets. I recommend reassembling from the right to left (meaning put the filter on first). Oh and be careful removing the sound tube fastener. Easy to snap off. Very easy install.
Placed my order from the Gm parts guy after seeing your install video. I received it midweek and installed it today. It was pretty easy with the help of your install video. Thanks Matt !!!!!
+Don C awesome
Don C any difference in sound or performance?
I just installed this kit on my '20 LT1 and it definitely made a noticeable difference with better throttle response and enhanced engine tone. It did need the performance tune done at the dealership as my Camaro ran less responsive after the installation. My advice is get the tune done for the most power gain.
They charge you for tune ?
OMG! Maybe i’ll sell my intake then. Scary when you talk about “less responsive”.
Perfect how to video. I hate the fact that they only offer the filter in blue right now
You can buy the other filters from Cold Air Inductions
LethalGarage Yeah but then your left with an extra filter and your costs just for a CAI intake is going up to like $600. I live in one of the banned states much like you. Have you had to get an emissions test yet on your car? That would be an interesting video. Your car seems like it would be banned in CA.... LOL
LethalGarage I'd prefer to buy the CAI version and see if you can buy the lid that says GM performance. That might be tricky getting them to piece that part out though
I installed the Cold Air Inductions model - GM Performance one not available anymore - on 5/25/23. Found out that 2020 and newer 2SS models to not have the sound tube anymore. The kit does not come with the AC tube wrap anymore and only one of the “green” sound washers, not two anymore. They also say not to unplug the Sensor, to remove whole and install back in whole, unplugged will throw a check engine light.
Thanks for this video. I called the dealer and they were cool with me doing the install myself, I’ll go in for a tune in a couple days. I sort of had to walk them through the process others may find that their dealer is a little in the dark on this product. A couple points about install, first the instructions state not to unplug the maf sensor, instead they say to unscrew it from the housing and set it aside. Of course I read this after I already unplugged it. And the second point is that lining up the 2 holes is a little weird because they line up at and angle. I stuck a small drill bit in the filter box hole and used a rule to line up the hole on the maf housing. I was nervous about eyeballing it and it’s a little difficult to see if you’re on the right mark
i'm sure your friends appreciate you and all your help ! ..........you're the best !
+thomas halikas Thanks Thomas
I just bought one and I’m having a hard time finding a Chevy dealership in my area to perform the tune. Do I really need it?
also that TB spacer kind of looks like it has a vortex generator on it
How did you do it to get the cold air intake if you live in cali?
my favorite part is the see through area
Was reading in some forums that it's better to take it to the dealer and get them to install it because if something goes wrong they might just blame it on you.
That could happen.
We heard that Grindr ping 😂
Matt, any ill effects on the car since you installed it? On a previous video you mentioned that the V6 model should have the tune installed; wondering if the tune is really needed on the V8? Ready to place the order for my SS, told my wife its a birthday gift for me : >
Is there one for the 17 ZL1???? I only see SS parts for any GM approved CAI. 🙄
Would the warranty still work for me, since I'm in Canada and it is not released here?
so when you have cold air intake, does engine can pull the water inside and clog the engine? long time ago i use to own ford focus and some pre owner instal cold air intake and when i was driving on rainy day and after passing the pool the water get in my engine and it killed my car.... now i own camaro v6 2018 so i was wondering if just depends of what kind of cold air intake?
"Literally" a nice video
🤣🤣🤣
I have one I feel like my car got slower is that possible ? I feel like gm intake proforms better do you think when I get a tune this will change?
Do you know where I could buy afm delete module for 2017 Camaro SS. I got cat back exhaust from borla so I unplugged my afm modules.
Does anyone know what to use to clean the intake ? And is the intake a dry flow intake correct ?
I just asked the same thing. Since it's dry I'm assuming you just bang that bad boy out and wipe it with a damp cloth but what do I know.
I see you asked a year ago so if you know let me know so I know.
✌
Awesome video can’t wait to install one on my 2018 2SS just a note went to the merchandise store sad to see that ur T-shirts are sold out wanted to sport one while I drove my Camaro keep up the great videos
I love it nice
You just saved me $20 at Phastek ordered a cold air inductions
+J Cunningham awesome!
Is that markoon's car? Looks like his wrap
Nope, its CornFedCamaro's.
Does it still whistle?
Question Lethalgarage! Does this by any chance fit the LT4 in the zl1?
It does not.
Bro I love you thanks
Im thinking of getting one of these. What is the actual power increase?
Will the throttle body still make the whistle noise if you have the vmax ported throttle body? the one you had an install vid for a while ago. Or do you still need the gaskets for that as well?
Need the gasket
LethalGarage thanks bro
Your opinion of aFe-Power-46-34011-Silver-Bullet-Throttle-Body-Spacer? Adds 8 hp.
That’s a BS claim.
Hi, Lethal, I got my gm CAI installed, but I find it still has the whistle sound like aftermarket ones😤
Did you install the throttle body piece that came with it?
Yes, I did. I installed it after ur video, so no mistakes, lol. It has whistle sound, oil pressure gage goes high when I hit the gas pedal, and the radiator fans keep spinning very fast after I shut off the engine. All of the three things happened together at my first ride and shut off after installing the GM CAI. But the next day morning till now, all gone, everything works normally. Weird!!!
Baron Wang your computer just getting used to the new airflow
The link for the part is no longer working. Can you provide a new one?
+Tyler Wooten try this one bit.ly/2xdb1DD
Looks a lot like Cold Air Inductions' kit!
Because it is.
Really? Did they do some type of partnership?
Totally didn't read the description, sorry. Lol
Will this throw a check engine light??
If you don’t tune it, yes
Matt what is a sound tube and why would some people wanna delete it? Another great video please upload dyno results too thanks
because it is pointless. The idea is that it ports additional intake sounds into your car to make you feel like you can hear your engine. with today's cars the padding and materials mute the sounds a lot. So this is a way to get some of the sound back.
explain the sound tube
It ports real intake sounds into the cab of your car. Most people never notice it.
yeah wondering what is the point of the sound tube? Why remove it vs not remove it?
Does gm make a cai for the 5th gen ss?
I have been wondering the same thing, i may look into retrofitting this one for my 5th gen
That's CornFed's Camaro right??
It is.
How much more power do you get with it without a tune?
depending on elevation and weather along with it being a A8 or M6 anywhere from 7-13rwhp.
Thanks for the info. I have a 50th Anniversary SS. I Love it. I was thinking of getting a cold air intake thanks again........
Backside catch can do I drain it?
Backside catch can?
Dog nail clippers are great for cutting tight zip-ties.
Yup. or basic wire clippers.
LethalGarage I just mentioned the clippers because they have are blunt in the front and less likely to get into the insulation if the tie is very tight on the wires
hey lethal you still got the spacer for the CAI i got from you. i dont know if i like the whistle with the top down.
I do.
I will hit u up in July..Cunningham is adding the E85 tuned on the 6. I get it from u then. If thats ok
Is the tune really necessary?
Yup
What is the tune for?
Is that an oiled or dry filter?
+Tom Grover its oiled
LethalGarage
Thanks bro just got it installed. Was curious as it didn't really feel oiled, and nothing on the install instructions said anything as far as maintaining or type of filter.
So... do I need a tune??
You should have your dealer install the tune that comes with the product
@@Lethalgarage right on thank you!
I dont know Greg
Sinister and David Rojas,
It's not the parts (intake) that void your warranty, it's the tune. Your warranty 3/36 (or whatever you got) is based on factory tune. Simply put if you do proper maintenance according to manufacturer your vehicle will perform at least through warranty period. Think about this, you put a supercharger on this car... well take a look at the ZL1, it's supercharged correct? and that's topped off with a warranty based on factory tune. Not the parts, it's the tune. Ok barring turning it into a alcohol drag car... I'm just saying 😎
Like me at;
ua-cam.com/video/4KspjmcVHwc/v-deo.html
I did the same thing. Why my engine light comes on???
Did you install the tune?
LethalGarage sorry i dont know whats that mean :(
I did not put the spacer on the throttle body? U thing thats the problem
Did anyone notice all of thise pessi cans?
I drive a camaro that I bought used and it had your logo and the “lethal camaro” logo in white lettering on the rear smaller windows. It’s a camaro lt fith generation 😊 just thought it was cool that I’m installing this same intake on my camaro and it happened to show your video in the google results now I watch your channel all the time 🤙🏼
Nice video of this guys car before he butchered it.
This is the CAI I have in my 2018 2SS 1LE. is the filter cleanable or do I have to replace it?
Thanks for the great install video. Can you hear the intake from in the car when driving? Any video clips driving
I know you posted this awhile ago, but I wanted to say thank you for the guide. My brother and I installed this last night and your video came in clutch. Also mine came with a 50 state emissions friendly sticker so I'm good here in SoCal. Thanks again!
+MD M Yup, GM rolled out a 50 State legal version
MD M did you take it to the dealer for the tune ? And can you tell the power and sound difference ?
akidim13 Hey man, Naw, I didn't take it to a dealer. After reading up seeing that it didn't make a difference really, I decided not to. I notice more of a pull at 2k rpm and others have told me it sounds slightly more aggressive. Although, it's been a little while since I've driven it, so this is all based off of memory. I don't have any dyno results or anything like that so share, sorry. Best of luck with whatever you choose to go with.
Any dyno gains with this part or anyone know if there is a power increase
Got the part from GM. Put it in and when I went to go to the dealer to get a flash, they said they couldn't do the flash because of the serial number of the part being wrong, even though the part was supplied to the dealer.
Great video, Matt! Looking forward to the completion of the 2nd gen. Camaro, too. Question for you regarding this CAI: Will this work on the 2020 SS 1LE that I bought in April? Looking up for my '20 brings me to everything from '16-'19. Thanks for any information you might have for me. Great channel!
I don’t think anything changed in 20 on the SS under the hood. They probably just haven’t gotten a car to verify yet
LethalGarage Thank you for your reply. I’ll check in with my Chevy Service Manage, too, before I buy this one that you installed. I’ll let you know how it turns out.
the Roto-Fab looks a lot better.
I just installed mine about an hour ago. Haven’t started it post install. Do I need a tune to start/ drive it with the intake?
Nice job with video, easy to follow instructions. Easy to install. I went slow and easy, took 90mins. Thanks again
+Carlos Fernandez no problem
Lethal how you do there I have one question what is the hp gain with that GM performance cold air intake system.
thanks
Lethal for video!!!
My test showed no gain
LethalGarage then why change the air in take ? Was the old one busted or ?
What size is the screws that goes in the mai sensor? I am trying to put back the original mass air sensor but i lost the screws
I recently installed a cold air induction system on my 2016 Camaro 2ss and thought maybe something was wrong because It was making a sound like it was getting too much air or something, so I put my stock one back on and its the exactly the same. Is this normal? Here is 35 sec video of it. Thank you! ua-cam.com/video/fzdgw__GCio/v-deo.html
just got mine... easy install.. I found the spring loaded screws annoying as hell... couldn't get the screws to stay closed.. finally by the grace of god after messing with them for 30 min I finally got them to stay on. LOL.
do the other brands have these spring loaded screws? to be honest, these screws seem like they aint going to last very long..
BTY... great vids man. like the way you go into detail. 🖒🖒🖒
Anyone by any chance got the part number or know how to get the Return PCV box on the stock intake. I never got the stock intake on my car as I bought it used and it had a CAI already. Can’t seem to find this little piece anywhere
Hey like your videos that you post especially this video been trying to find a cold air intake for my 2017 camaro ss but all are not California legal.. i checked out the web sight provided for the chevy performance part but it says in the website the same as all the other ones "not intended to use or sell in California" is there any cold air intakes that can be bought here and use in California??
thanks
Not worth it
I watched this video a bunch of times cause it comes up in my feed .
So I might as well ask whose car is that. ?
Is the whistle issue that can develop a problem with the car or is it just to stop making the noise????
Fantastic video as always! Keep up the great work Matt!
Thanks
What's the best way to clean the filter 🤔?
Can you buy that o ring seperately? I have a K&N CAI I would like to add it to that whistles and drives me nuts.
Didn’t see tune info please send thanks
We do not tune the vehicle. You need a professional for that.
so if i purchase this intake and dont get it tuned, since im in cali, will it void the warranty?
It shouldn't, but talk to your dealer first.
David Rojas did you find out if it voids the warranty?
Quoted from thatgmpartsguy.com
"The provided Tune/re-calibration is for emissions purposes only and does not increase performance nor does this kit through a CEL. If your sole purpose is to maintain vehicle warranty and have this cold air intake, you must allow a GM dealer to use the re calibration code with the kit and re-flash your ECM."
+SteelCyclone without the tune the car will run lean and ruin the engine.
LethalGarage so it doesn't matter what CAI I decide to buy, I would still need to get it tuned?
Lethal:
What does the tune do? Is it necessary when installing this piece?
IS there a listing for the 37 approved states? Is the tune for emissions only and if the tune is not installed will it fail emissions test? I dont know how much I trust a GM dealer to install this tune. Worries me a bit.
+Mike Geyer its listed on the site linked below.
I heard this one also fits the V6.
How does the tune make the intake comply with emissions? Does it inject less fuel or time the amount of air being sucked in, or does it make the spark plugs fire earlier with the intake?
The tune really only adjusts the MAF from what I am told. This product causes the car to loose power with the tune they provide.
@@Lethalgarage so it's worthless to option for this intake if yoy were to build it? I guess it makes sense because on the builders site, it says how it improves air flow but doesn't mention that hp or tq numbers are increased. So its probably best to keep the factory filter then get an aftermarket one so the tune is the same but u get more powee
@@blackice7408 roto fab is the only brand to show real gains in power.
@@Lethalgarage tnks
Sounds like "kaka" Lmao😂😂 good video keep up the good work👌🏻👍🏻
Will do.
Do you need a tune after the install? or is it just plug n play..?
Tune needed for the GM setup
it would hsve been nice to actually HEAR the engine rev or something.
+Redzone maybe watch until the end
LethalGarage
🙈🙈
What you think is better? CAI or Roto Fab intake?
Roto-Fab
How does an intake effect emissions?
the car pulls in more air causing a bigger combustion, causing more exhaust.
hello Matt did you get your procharger fixed?
Nothing was wrong with it according to ProCharger. Video incoming and full details once it is back on the car.
I have a bone stock 2019 camaro ss is this a good first performance mod??
Yes! It’s an easy 11-13 hp/tq according to wildhammer you have the option to also order it with a GM race filter (gray)
I don’t trust those gains.
LethalGarage yeah idk that’s what I seen I know rotofab is still the best one to go with,I’ve been struggling to get one Cali problems lol
M P I had the same problem and honestly ,I took mine out my tuner said the dealership didn’t tune my car correctly so that was the main problem ,it sucks cause I paid so much for it and fought the dealership they charged me labor off the roof $600 for installing an intake plus tune when it clearly says tune shouldn’t be a charge only labor so total $1200 but I argue with them and it got nowhere ,I went ahead and switched to RotoFab and E85 and said screw the warranty and man I love it
Does the Rotofab whistle?
+Gabe Armijo nope
Thanks Matt for your install videos and honest views on these products. Today I received and installed my GM performance cold air inductions intake which was purchased from thatgmpartsguy.com, I used your video and not the provided instructions for the install. LOL. Love the sound and can't wait to take it back to the track to see the gains. My best stock run out of 4 runs was 12.645 @ 113.15. I'm hoping I can get in the low 12's, i guess i will see the results next weekend. Thanks again. -Sam
How was it ? Any gains ? I know this was months ago haha