Great to see Hoyt hitting the entry-level market for risers, but why don’t the limbs start any lower than 20lbs? Most of my female and youth archers need 16 to 18# to start off with, so I’ll still be recommending Galaxy limbs as they work on their form and strength.
agreed-I run the first JOAD program in the USA and we have a bunch of 16 pound limbs. I have been using the Gillo GY bow for smaller kids since that will adjust down to as low as 10-12 pounds depending on the draw.
What is the max limb weight you can safely use on this Riser? The matching RCRV limbs go up to 36 lbs, but if you put 50+ lb limbs on the riser, is there potential to break the riser?
Does anyone know whether the risers are compatible with the limbrocker system "String Tension Adjustment Blocks" from Xceed or the new GMX? So it would be very good, if a beginner become more and more accurate, it can adjust its limbs even more. In the EU I could buy this for
Great to see Hoyt hitting the entry-level market for risers, but why don’t the limbs start any lower than 20lbs? Most of my female and youth archers need 16 to 18# to start off with, so I’ll still be recommending Galaxy limbs as they work on their form and strength.
agreed-I run the first JOAD program in the USA and we have a bunch of 16 pound limbs. I have been using the Gillo GY bow for smaller kids since that will adjust down to as low as 10-12 pounds depending on the draw.
If your youth archers are shooting the 20lb limbs, they are most likely only pulling between 16 and 18lb especially if you back out the tiller bolts
@@charliestribling9080 Some of them need the 16/18 backed out to start with to have 14/16 on the fingers as they work on their form to avoid injury.
What is the max limb weight you can safely use on this Riser? The matching RCRV limbs go up to 36 lbs, but if you put 50+ lb limbs on the riser, is there potential to break the riser?
No……the riser will handle limbs of any weight
When will these be available for purchase?
They are available on our website right now!
@@LancasterArcherySupply Says "Temporarily Out Of Stock", is that a 2 week wait or 6 months?
I cannot imagine that it would be long at all.
Does anyone know whether the risers are compatible with the limbrocker system "String Tension Adjustment Blocks" from Xceed or the new GMX? So it would be very good, if a beginner become more and more accurate, it can adjust its limbs even more. In the EU I could buy this for
The threads for the button are blue so iam guessing the riser is anodized.
Guys what do you think?
Correct
That's great, thanks for the answer
Any word on if these things are actually being made here in US?
They are not
@@pjreilly3997also are these risers cast or billet cut?
Item temporarily out of stock...
Risers are very competitive. Limbs are more meh.