If you are looking to do this project, here is a link to my Amazon store to help you get started! www.amazon.com/shop/theexcellentlaborer?listId=26NV7FPITV5G3&ref=idea_share_inf
this must be the cheapest builder favorite have a few of these in the house, I hate that plastic cover is a dust magnet and not good air flow, ty for the video
Thank you so much most youtube videos show how to “replace” but not how to install exhaust fan on a bathroom that never had one! 🙏🏾🙌🏾🤞🏾 no I feel confident to go to mine 😊
If installing it in attic space wouldn’t using insulated duct be more appropriate because of the cold attic environment? Band clamps or screws holding the ducting on then tape wrap is better. My question is: would it be better to oversize a fan a bit because I often find myself running my bathroom fan at least 20 minutes after my shower to help dissipate the moisture build up during the shower that it couldn’t keep up with?
How can I remove this style fan, when it’s screwed tight to the above floor joist? I almost have it removed but the housing won’t budge. Is my only option, to cut into my ceiling?
When stripping the wire I recommend just cut at the very end, and then pull back on one wire to split the yellow jacket back to the wire entrance. This way you don't risk cutting into the wire with your blade.
It's pretty much the same it will have an extra black wire or blue and connect them together. Or if you want to run a separate wire and have a switch just for the light than connect the blue to the new wire.
Your vids are awesome. I work in maintenance for a timeshare property been doing it for about 5yrs and do a few side jobs ur vids are helpful keep them coming .👍🏽😎
Is that a dedicated 12/2 wire? I have a bathroom fan that calls for 14 AWG and just wondering if exhaust fans need to have a dedicated wire or can it be spliced off of an outlet
Great video. Thanks for making it. Now I know why I can't remove the whole assembly without having to get into the attic. I think I will just replace the motor module for now. I figured while I was looking to replace it, I'd inspect the flexible duct hose to make sure it was clear of debris. I've heard stories of construction workers stuffing trash in it ¯\_(ツ)_/¯
Nice video and well done. As an alternative to tape couldn’t you use zip tie or hose clamp? Seems like this would make for a quicker and easier installation.
Yes I have used hose clamps in the past. I feel like it is a better seal with the tape. It probably would do just fine with the clamp though. I have never use zip ties. That could be something to try. Thanks for watching!
I replaced mine, same brand, and just replaced that part containing the motor and the fan etc and just put it back into the original housing that was installed in the attic access but either part of the housing seems loose or something is wrong because it fell back out when I was troubleshooting to make sure it worked after plugging it in, I was able to put it back in, just not sure I trust it...so far with the cover on, it's working, just doesn't seem real secure and although it's in the same way the old one was, didn't seem to click in like yours did in those little slots.
Great video! except where on the house do you exhaust??? Can the flex tubing go below the level of the fan and out the side of house ? Should it stay above the level of fan and out from the roof? Which would require a different vent cap. Thank you for your response
Always enjoy your excellent videos Josh. In my opinion, they are the best on the Internet for this type of work. I too wish you would supplement this by adding how to connect the same fan with a light. I have in my hand the Broan connections for the combo unit. It has the two plug-ins, one with black & white and the other blue & white. I am assuming that 12/3 or 14/3 will be run, the white neutrals wire nutted together and the two blacks will connect and finally the blue and red (from the 14/3) will wire together. Correct?
If you look at the videos on my channel of wiring the rooms, ( ua-cam.com/video/ccrQBLvQTPQ/v-deo.html )they show me running a 12 three wire to power the fan light combo. It is the exact same way you would wire a bathroom fan light combo. I hope that helps!
At this point the manufacturer recommends and now provides a zip tie. Seems waaaay easier, and like it won't fall off in five years when the adhesive on the tape gives up
Good video but I have no idea how you can use walmart brand screws. I've never had their nails or screws work for me. Always have to buy them from a hardware store.
Thanks Alberto! Started this channel for fun and then I realize how many people enjoy watching the videos and learning a thing or two. I will keep the videos coming your way! Thanks a lot for watching!
Thanks! Yes we use 12/2 on everything. Cost a little more but I’d like to make sure I have enough gauge for the future. I will check out Panasonic. Thanks for watching!
Hi Josh, LOVE your videos. I have installed two similar Broan fans in my build and one has a heater, the other just exhaust. I am planning on SEVERAL inches of blow in cellulous insulation after the ceiling goes in. Do cover yours with insulation, do you build a protective box around your fan.... mine is IC rated but I am worried about the fan with the heat unit. Should I build a protective foam box around it or bury it with blow in insulation.??? Thanks!!
I moved into a house with a downstairs bathroom. Noticed that the ceiling fan isn’t connected to a flex duct or obviously a vent. Any tips on how to run it to the outside? My guess is to stay away from the top two two block courses on the basement wall and punch through the third. Is it okay to punch through the second course or stick with my gut?
These are a pain in the butt to replace. Why would they design this with the screws to the attic side. So should I destroy the sheetrock in order to fix this?
If this fan was temporarily(two days) being mounted on a wall could you bypass the internal ‘outlet’ and the wiring by plugging it directly into a gfci outlet on the wall ?
Hi! So I took mine down and apart cuz I noticed it starting smelling like dampness in the bathroom. It was dusty af…i cleaned it and still not exhausting but the fan is blowing but not towards that black thing. Also that black plastic exhaust pipe thing has little flapper things that can open if I tap on them but not too much…like there is something blocking it maybe or maybe they just don’t open wide I don’t know (I’m a female 1st time even doing this crap)…so my question is should I just turn the stainless motor housing thing around to blow towards the black plastic exhaust??? No one mentions if the air should blow towards that way or if it even matters since it’s blowing in that recessed housing….just curious. Thank you!
have a question, my curtain bathroom exhaust is the same size as this one but the duct is on the opposite side? is the duct moveable to the other side? thanks!
Hey Josh! Thanks for the awesome video! I had a question. Is there a code on having the flexible duct sloped or not really. Mine I installed not sloped. Thanks man! GOd bless!
@@TheExcellentLaborer yes free of clogs. I actually removed the fan to put rodent repellent between the floors ( downstairs bathroom) before I reinstalled the fan I just plugged it in to make sure I didn’t damage anything when I removed it and that’s when I noticed that the air was getting blown into bathroom. When I placed my hand on what is supposed to be the exhaust side I could not feel any wind. The wiring seems correct. Black - black / green - copper / white - yellow
Also might add that heavy foil tape will slice your fingers. vent covers can sure be ugly,,mounted👍🏼. depending how far to run the duct,,support between joists.
I have this fan ready to install I'm basement. When I Google duct length and size limits it says 3 inch is not allowed for fan??? I. Ended up increasing it to 4 inch but according to the tables that come up online that's only allowed up to 4 feet and I have 20 feet to go. Can you elaborate if you have heard of these charts ?
While push ins are excellent in many circumstances, in this case they are an absolute no-no as the wire supplied with the Broan is twisted. He did it properly and it would have been against code and a fire hazard if push ins were used.
Its against building code to vent anything into the attic or in a concealed framed structure. Steam, septic gases, drier lint, contents from range hoods.. All fire or health hazards. Read a building code manual or don't put anyone elses family at risk. Very unprofessional. 🤣
If you are looking to do this project, here is a link to my Amazon store to help you get started! www.amazon.com/shop/theexcellentlaborer?listId=26NV7FPITV5G3&ref=idea_share_inf
I don't see the clamp in your Amazon linked store you referred to in the video?
I@@dawnolivo9645
This was informative but I would like to see this on old work.
You’re the best! You can tell you have a heart of a teacher
Thank you for doing these videos, they have helped me a lot with our remodel.
this must be the cheapest builder favorite have a few of these in the house, I hate that plastic cover is a dust magnet and not good air flow, ty for the video
Thank you so much most youtube videos show how to “replace” but not how to install exhaust fan on a bathroom that never had one! 🙏🏾🙌🏾🤞🏾 no I feel confident to go to mine 😊
If installing it in attic space wouldn’t using insulated duct be more appropriate because of the cold attic environment? Band clamps or screws holding the ducting on then tape wrap is better. My question is: would it be better to oversize a fan a bit because I often find myself running my bathroom fan at least 20 minutes after my shower to help dissipate the moisture build up during the shower that it couldn’t keep up with?
Had the exact same fan, this is what I need. Mine is side mount in a basement bathroom, this fan is rated for side mount, pretty cheap too.
Thank you for the important detailed side notes from what is/are not specified on the installation instructions.
You are welcome! I noticed a lot of videos leave out details. Thanks for watching!
Absolutely, they assume we are all builders. Thanks.
You are awesome 👌. I was able to remove my old rust Broam 688 motor and all. Thanks
Glad I could help!
How can I remove this style fan, when it’s screwed tight to the above floor joist? I almost have it removed but the housing won’t budge. Is my only option, to cut into my ceiling?
When stripping the wire I recommend just cut at the very end, and then pull back on one wire to split the yellow jacket back to the wire entrance. This way you don't risk cutting into the wire with your blade.
I just installed one and thx to you it went smooth. Thx!
That is great to hear. A little knowledge DIY projects are pretty straightforward. Good luck with the rest of your projects!
You are the best
Thank you!
Do you have a video of installing one with a light in it as well?
It's pretty much the same it will have an extra black wire or blue and connect them together. Or if you want to run a separate wire and have a switch just for the light than connect the blue to the new wire.
Thank you for this helpful video, you’re awesome 👏🏼
You are welcome! I’m glad you found this video helpful!
Your vids are awesome.
I work in maintenance for a timeshare property been doing it for about 5yrs and do a few side jobs ur vids are helpful keep them coming .👍🏽😎
Thanks a lot for the comment! I will be sure to keep the contact rolling. Stay tuned!
Is that a dedicated 12/2 wire? I have a bathroom fan that calls for 14 AWG and just wondering if exhaust fans need to have a dedicated wire or can it be spliced off of an outlet
Don’t let the keyboard experts bother you. Great video I used your video step by step when I installed mine. Thanks for sharing!
Thank you!! ❤
Great video. Thanks for making it. Now I know why I can't remove the whole assembly without having to get into the attic. I think I will just replace the motor module for now. I figured while I was looking to replace it, I'd inspect the flexible duct hose to make sure it was clear of debris. I've heard stories of construction workers stuffing trash in it ¯\_(ツ)_/¯
Nice video and well done. As an alternative to tape couldn’t you use zip tie or hose clamp? Seems like this would make for a quicker and easier installation.
Yes I have used hose clamps in the past. I feel like it is a better seal with the tape. It probably would do just fine with the clamp though. I have never use zip ties. That could be something to try. Thanks for watching!
@@TheExcellentLaborer does it still need to be flush with joist ,? what about drywall for ceiling? if its 1/2" shouldn't i give a 1/2 or no?
@@Eastbaypiscesat 1:34 of the video he bends up those tabs. That gives the 1/2 for drywall.
Thanks for the video. it helped me
You’re welcome. I’m glad I could help!
Super detailed!!! Couldn’t ask for a better video!! On to my install!! Thanks.
The only way I can help you 8s watching all the commercials with out skip.
Good job.
I replaced mine, same brand, and just replaced that part containing the motor and the fan etc and just put it back into the original housing that was installed in the attic access but either part of the housing seems loose or something is wrong because it fell back out when I was troubleshooting to make sure it worked after plugging it in, I was able to put it back in, just not sure I trust it...so far with the cover on, it's working, just doesn't seem real secure and although it's in the same way the old one was, didn't seem to click in like yours did in those little slots.
Same here bro, back up in that rusted frame and call it a day
How do you turn the fan on & off? Do you have a video showing how to run this to a wall switch?
Great video! except where on the house do you exhaust??? Can the flex tubing go below the level of the fan and out the side of house ? Should it stay above the level of fan and out from the roof? Which would require a different vent cap. Thank you for your response
Always enjoy your excellent videos Josh. In my opinion, they are the best on the Internet for this type of work.
I too wish you would supplement this by adding how to connect the same fan with a light. I have in my hand the Broan connections for the combo unit. It has the two plug-ins, one with black & white and the other blue & white. I am assuming that 12/3 or 14/3 will be run, the white neutrals wire nutted together and the two blacks will connect and finally the blue and red (from the 14/3) will wire together. Correct?
If you look at the videos on my channel of wiring the rooms, ( ua-cam.com/video/ccrQBLvQTPQ/v-deo.html )they show me running a 12 three wire to power the fan light combo. It is the exact same way you would wire a bathroom fan light combo. I hope that helps!
hmm why not just use hose clamp on the duct
At this point the manufacturer recommends and now provides a zip tie. Seems waaaay easier, and like it won't fall off in five years when the adhesive on the tape gives up
Saludos bendiciones Josh gracias x exelente video. Muchos calurosos abrazos a la familia 🇬🇹🙏
Thanks Jonathan! I hope all of your projects are going well. Appreciate you watching!
Nicely done!
Thank you! I’m sure you have done a fan or two in your time. Thanks for the comment!
Great information and demonstration………Thank you
Good video but I have no idea how you can use walmart brand screws. I've never had their nails or screws work for me. Always have to buy them from a hardware store.
Thanks for watching and commenting. Have a good one!
Do you have a how-to video for an existing bathroom?
I love your videos!! Thank you for doing them!!
Thanks a lot Cindy! I’m glad you like them. I try to upload at least twice a week. Stay tuned!
Awesome video my guy. You have help me allot.. keep at it 👌
Thanks Alberto! Started this channel for fun and then I realize how many people enjoy watching the videos and learning a thing or two. I will keep the videos coming your way! Thanks a lot for watching!
@@TheExcellentLaborer thank you brother.. awesome videos...😁 Hope God keeps blessing you.
Thank you! this is what i needed!
thank you
You are welcome Bobby!
Thx for the video. It was the answer to my scenario. Not ce Nicey Man👍💪
Thanks a lot🤗👍👏👏👏
Thank you Linda!
I am very pleased with the video however you left out the switch connection
How much length can the bathroom vent duct be away from the vent?
Thanks for the great video. Can you please put the link for the external unit you used that opens when the air goes out.
Excellent video…
Thanks for this. It was very helpful. Keep up the good work
Exelentisimo just what I need thank you for your help
in AZ sounds like to "code bathroom can have either, all bathrooms need a fan, OR should have BOTH
What can I do if I don't have ground cable only the white and black?
I appreciate the video, but was looking to see how it is connected to a switch.
Nice job, guess you guys use 12/2 for everything? Kind of pricey these days! Upgrade to Panasonic 👍
Thanks! Yes we use 12/2 on everything. Cost a little more but I’d like to make sure I have enough gauge for the future. I will check out Panasonic. Thanks for watching!
Why it's only 2 screw instead 4..?? For both side to secure the fans..?
Hi Josh, LOVE your videos. I have installed two similar Broan fans in my build and one has a heater, the other just exhaust. I am planning on SEVERAL inches of blow in cellulous insulation after the ceiling goes in. Do cover yours with insulation, do you build a protective box around your fan.... mine is IC rated but I am worried about the fan with the heat unit. Should I build a protective foam box around it or bury it with blow in insulation.???
Thanks!!
Great video!
Excellent 👌
I moved into a house with a downstairs bathroom. Noticed that the ceiling fan isn’t connected to a flex duct or obviously a vent. Any tips on how to run it to the outside? My guess is to stay away from the top two two block courses on the basement wall and punch through the third. Is it okay to punch through the second course or stick with my gut?
Any video on how to install the switch for it?
Thank you so much
Where on my bathroom fan would I find the model number so I know which one too buy. Thank you for sharing.
think you should have had insulated flex ductwork if it's in the attic?
These are a pain in the butt to replace. Why would they design this with the screws to the attic side. So should I destroy the sheetrock in order to fix this?
😂😂 They are, second or third time, I just use existing housing lol!!!
If this fan was temporarily(two days) being mounted on a wall could you bypass the internal ‘outlet’ and the wiring by plugging it directly into a gfci outlet on the wall ?
Hi! So I took mine down and apart cuz I noticed it starting smelling like dampness in the bathroom. It was dusty af…i cleaned it and still not exhausting but the fan is blowing but not towards that black thing. Also that black plastic exhaust pipe thing has little flapper things that can open if I tap on them but not too much…like there is something blocking it maybe or maybe they just don’t open wide I don’t know (I’m a female 1st time even doing this crap)…so my question is should I just turn the stainless motor housing thing around to blow towards the black plastic exhaust??? No one mentions if the air should blow towards that way or if it even matters since it’s blowing in that recessed housing….just curious. Thank you!
have a question, my curtain bathroom exhaust is the same size as this one but the duct is on the opposite side? is the duct moveable to the other side? thanks!
I’m doing a replacement and the black circular thing is on the wrong side for my wall. I can’t put it in. Any tips? Can I remove it?
Hey Josh! Thanks for the awesome video! I had a question. Is there a code on having the flexible duct sloped or not really. Mine I installed not sloped. Thanks man! GOd bless!
thanks
Why does it feel like the fan is blowing the wrong way. Into the bathroom instead of extraction? Thanks
Is your piping free of clogs? That would be my guess
@@TheExcellentLaborer yes free of clogs. I actually removed the fan to put rodent repellent between the floors ( downstairs bathroom) before I reinstalled the fan I just plugged it in to make sure I didn’t damage anything when I removed it and that’s when I noticed that the air was getting blown into bathroom. When I placed my hand on what is supposed to be the exhaust side I could not feel any wind. The wiring seems correct. Black - black / green - copper / white - yellow
Can I T connect to radon vent pipe ? So I don't have to make another hole in my house
awesome tutorial
I subscribed, your videos are fresh
Thanks Frank!
Home Depot sells Home NetWerks 1.5 Sone 110 CFM Bluetooth Bath Fan
I seen that tonight I want it
Also might add that heavy foil tape will slice your fingers. vent covers can sure be ugly,,mounted👍🏼. depending how far to run the duct,,support between joists.
does it need to be home runned to the panel or can i pull power from an outlet?
If 15amp outlet I would do a new home run, if 20amp you’re probably fine to tie into it
The builder installed the exact same fan in my bathroom but vented it in the attic, is this okay. Thanks
The builder should have vented it through the attic but through the house roof
I have this fan ready to install I'm basement. When I Google duct length and size limits it says 3 inch is not allowed for fan??? I. Ended up increasing it to 4 inch but according to the tables that come up online that's only allowed up to 4 feet and I have 20 feet to go. Can you elaborate if you have heard of these charts ?
Old comment, but I found the same thing in referencing the 2018 IRC code. 4 inch is the min, and it dictates how far you can go with flex vs rigid.
Wiring?
Now do it again with drywall in the way
50 CFM is recommended for bathrooms up to 45 sq. ft.
70 CFM bathroom fan for bathrooms up to 65 sq. ft.
that is 1 fan that should be powered by same motor of a Joiner planer, or table saw
"MORE POWER"!!!😆
👍🏻
I appreciate that!
I'm not an electrician and I know here we are in 2022 and you're using wire nuts WoW .
While push ins are excellent in many circumstances, in this case they are an absolute no-no as the wire supplied with the Broan is twisted. He did it properly and it would have been against code and a fire hazard if push ins were used.
👍
Thanks for the thumbs up!
@@TheExcellentLaborer 👍
Flex duct is big no no
Use solid pipe or at least rigid aluminum
I have been using it for years and it works fine. Did you have a bad experience with it?
How redundant Rookies don't quit your day job...
Shows new home construction instead of existing bathroom, 3" instead of common 4", out-of-focus images, sloppy duct install . . .
Nice hands. Wonder of he has nice feet.
Bro you didn't even go through the wiring process.
geez man, the cheapest exhaust fan on the market, at least get one that is 1 sone.
Why would you install that junk? Why not choose a better product?
Dude went over to the dryer vent as an example. Come on dude nobody venting anything from their ceiling out the side of their house
Thats actually untrue
Its against building code to vent anything into the attic or in a concealed framed structure. Steam, septic gases, drier lint, contents from range hoods.. All fire or health hazards. Read a building code manual or don't put anyone elses family at risk. Very unprofessional. 🤣
@@scotteric8711 maybe in your state LOL
You must love mold half ass diy'er
Happens all the time bro. I’m exhausting multiple out my walls on my barndo.
"new construction"...pretty useless for people not looking for "new construction"...🤦