long tail props
Вставка
- Опубліковано 24 лип 2015
- About Long tail propellers, size, diameter and how to fine tune them to go fast and be able to surface prop like hydroplanes do. This is an informational video about going faster, smoother and cheaper.
- Авто та транспорт
After buying my SPS setup I soon realized that they are far superior, my opinion has changed. I recently bought the SPS American setup the more expensive higher quality unit normally sold in America, it stands head and shoulders over them all, well worth the price.
I enjoy your vids and find you very informative I live In Stockton Ca hour half away east from San Francisco.. I purchased a used sps with a 6.5 predator for 100 bucks from a guy in San Jose ca I don't think he knew what he had all he wanted is to make room in his garage I felt like I won the lottery lol.....
This was very helpful. Thank you.
How ya doing , havent had my boat in the water in a while ,but im back at it , im getting my 23hp worked on so i built another 13hp longtail, just got it done and have been enjoying my river again , in fact sometime late fall or early spring i plan on running all 310 miles of the St Johns River here in Florida that river runs south to north ,then i may even run back south when i hit the intercoastal waterway not sure about that yet , but i need to load of gear to do that run ,so as i work on collecting all the gear i need , ill be exploring the rivers again , just thought id say Howdy .
I want to make a motor with 1" pipe with 3/4 inch shaft using copper pipe fittings for bushing and some lock collars or roll pins. Put in zerk fittings ang grease it alot. Very cheap to build!
What size is the fan
Will it sink if it gets a hole in it?
will a sks fit on a clp or vice versus? Are they interchangeable "universal"
+Jon Hunt yes interchangeable, cheers
I have a 13 hp engine what size fan should be used
8 in.
Hello, i'm back! Now i have one aluminium boat with 3,5m X 1,12m. Flat hull and one V-Twin 22 hp. I have some sizes of props: 8" / 8,5" / 9" / 9,5" / 10" / 10,5". All SPS props. what size is better for "walk" in mud?
Ps.: Size 8" and 8,5" are more pitch.
It all depends on the drag of the hull start small and work up. :-)
+Walkertongdee Ok, thank you!
I am pretty sure the props are all made by the same company. I import the CLP brand to the USA and sometimes the props have SPS marked on them. I could easily find out but based on that I assume they are all made in the same place.
+Robert Milner I doubt it. KKK was the old company 50 plus years old, then the old owner split off and made a new company called SPS. ClP is a different company altogether that "as you may know" make farm equipment and have their own CLP brand props. CLP can and may use SPS or KKK and a secondary provider may sell units with any prop they want. I am sure the three are made in three separate factories. I could look them up, I once knew where they were made. They look quite different, although the SPS and KKK look similar because SPS came from KKK. The original KKK owner had a partner and they had a falling out, that original owner/designer split off and started the SPS brand. Actually I know way too much about such a trivial thing. Hey, Don't forget to have fun and good luck selling CLP's.
+Walkertongdee I just assumed there was one propeller manufacturer that supplied CLP, SPS and KKK with props.(all the props I have seen in the US have seemed the same to me- some are "polished" some aren't) I have never bothered to ask. I am familiar with all 3 brands. I have been working(distributing their product in the USA) with CLP for 3 years now and they are great to deal with. Duck hunters and fisherman love using the Thai longtails and they are getting much more popular here now. It is a lot of fun and I use/test mine weekly. Cheers
Yes same,same.. The CLP with the predictor should be very light the 6 hp. especially so.
Have fun!
Where do you get all them props ????
from the local store, they are available all over Thailand,. contact the SPS website in Thailand. If you are in North America I recommend mudmotorkit.com/they keep them in stock see John Doobs great co. great people.
How to order?
I dont sell where are you located ?
KKK 9" Props will be install on Diesel engine like Thai style..
Mình cần mua sao phải lien hệ được
Xin chào, bạn của tôi, tôi khuyên bạn nên trang web này
th104740437.fm.alibaba.com/productgrouplist-101592327/Mud_motor_long_shaft_long_tail_Mud_Motor_Kit.html?spm=a2700.icbuShop.0.0.72b1630clHElM4
How can i get these
where are you located?
@@walkertongdee Florida
ok no reply watch the end of the video and see where to go to get them if you are in America or Canada.
@@walkertongdee I live in Tampa Florida USA
how are you getting props for 5 dollars??????
standard price in Thailand
You made me laugh my a$$ off from the way you were talking about the KKK
I get it I said I like the KKK but I did not even get the reference at the time LOL its a big world ant they are just three letters... باركك الله
Sean, I wish they were $150.00 in the USA. :)
+Buddy Harrison The Mud Motor kit in the US is worth the price, there are costs to doing international trade... Cheers Buddy!
Hello, i wish "walk" in the mud, but i can't. Can you help me? My engine is a diesel 5hp with gear box 2:1. My prop is 7 1/2 X 6. When i put the prop in the mud, the prop just open a hole and i still stopped.
Can i "walk" like this man? --> ua-cam.com/video/gzUv8fVixrc/v-deo.html
Thank you and i'm sorry for my bad english.
Use um casco de pelo menos 5 metros de comprimento, um tipo de canoa de casco estreito com um 13 hp. motor. Use um casco de fundo plano ou quase plano. Não mais do que três pés no mais largo. Um barco pesado não é bom.
seu prop muito lento baixa velocidade de baixa potência 13 hp 3400 rpm maior velocidade maior potência.