Before adjusting anything on the brake, look inside the caliper to see which brake pad has the most distance from the disc rotor. As if you just tighten the pull on the cable you have a chance on bending the rotor. To clean the charging port use electrical contact cleaner, as it won't leave any residue. Don't use WD40 as it is a degreaser and will remove grease from the parts you need it most, such as the wheels which have sealed bearings filled with grease.
WD40 is the opposite of a lubricant. You use it to dissolve grease and dirt. WD40 > wait a few days > lubricate with silicon grease or whatever type your prefer.
TLDR: -Check brake: lever and cable tightness, brake disc -Check wheels spin freely -Lubricate wheel bearings(don't recommend the WD-40, use some oil instead) -Check motor works with throttle -Check folding hinge -Lubricate folding hinge -Tighten loose bolts(and maybe add Loctite) -Check lights -Check tires: pressure, wear -Clean charging port -Check underside cover -Check stand -Check cable hole covers
I noticed that my M365 makes a CLICK when accelerating, and the same CLICK back when braking. Every screw is tight, not sure what could cause it as the hinge does not have metal on metal contact. It seems like it is coming from the for bearing, but I could not be sure. Any ideas?
though another source says could be throttle or brake. Ninebot Max has an issue whereby the brake sensor goes out of calibratrion (it's a hall effect sensor) so Segway being owned by Xiaomi (and you can see they interchange IP between the businesses) it's likely its simular issue. I don't own a M365 so dunno if there is a brake lever/throttle lever recalibration procedure
ça serre a rien de graisser les roues par l ' extérieure sans démonter les roulements , il y a des joins pour empêcher la graisse de sortir , donc elle ne peut pas entrée par l ' extérieure 😉😉😄.
Before adjusting anything on the brake, look inside the caliper to see which brake pad has the most distance from the disc rotor. As if you just tighten the pull on the cable you have a chance on bending the rotor. To clean the charging port use electrical contact cleaner, as it won't leave any residue. Don't use WD40 as it is a degreaser and will remove grease from the parts you need it most, such as the wheels which have sealed bearings filled with grease.
Bro what are you doing? WD40 dissolves all of the oil inside the bearings. It´s the absolute worst to use as a lubricate.
WD40 is the opposite of a lubricant. You use it to dissolve grease and dirt.
WD40 > wait a few days > lubricate with silicon grease or whatever type your prefer.
TLDR:
-Check brake: lever and cable tightness, brake disc
-Check wheels spin freely
-Lubricate wheel bearings(don't recommend the WD-40, use some oil instead)
-Check motor works with throttle
-Check folding hinge
-Lubricate folding hinge
-Tighten loose bolts(and maybe add Loctite)
-Check lights
-Check tires: pressure, wear
-Clean charging port
-Check underside cover
-Check stand
-Check cable hole covers
With WD40 you are basically removing the lubrication 😬
Wd40 isnt a lubricant.
Use bike oil
@pjesapjes thank you! I knew about not using wd-40 but was curious what kind of lubricant is best for wheels that arent spinning freely
Good information sir
Nothing about alignment? It feels like the handlebar to wheel alignment gets off pretty easily.
Can u do a indept video on cleaning plz
I noticed that my M365 makes a CLICK when accelerating, and the same CLICK back when braking. Every screw is tight, not sure what could cause it as the hinge does not have metal on metal contact. It seems like it is coming from the for bearing, but I could not be sure. Any ideas?
Where can i buy the jacket so nice is it available online?
That was so useful, thank you.
I bought for 3 days before. I charged then its was not working again it says 14 red. What I can do my friend?
www.reddit.com/r/ElectricScooters/comments/d2r2or/m365_error_14/ maybe bad throttle? I'd return it under warranty
though another source says could be throttle or brake. Ninebot Max has an issue whereby the brake sensor goes out of calibratrion (it's a hall effect sensor) so Segway being owned by Xiaomi (and you can see they interchange IP between the businesses) it's likely its simular issue. I don't own a M365 so dunno if there is a brake lever/throttle lever recalibration procedure
thanks buddy
Don't follow any of the "advice" in this video. Don't ever use wd-40 to "lubricate" anything.
nice job
My front wheel keeps on clicking what can I do
What kind of smartphone mount is it ?
Search aliexpress for "bicycle phone holder"
I would recommend some softer or bending phone holder that doesn't impale you in a crash. That one looks a little pointy.
Hub g81
This video is just maintenance....these scooters require a service.....WHERES THE VIDEO FOR THAT????
ça serre a rien de graisser les roues par l ' extérieure sans démonter les roulements , il y a des joins pour empêcher la graisse de sortir , donc elle ne peut pas entrée par l ' extérieure 😉😉😄.
My guy, I don't think you know what WD40 is for... Get rid of this video, you misleading people!
Il n ' y a pas de maintenance sans un minimum de démontage !!!!!! .🤔🤔
i was expecting a dissassembly of the motor to grease the gears.. the f you call this maintenance?
Sh*t I’ve just done it