Tutorial : Install Front Disc Brake for Yamaha RX100/RX135/RXG/RXZ (English)
Вставка
- Опубліковано 13 лис 2020
- Hey guys, Hope you're all doing well!
I'm back after taking a short break :D
In this video, I have covered every single aspect/detail that I can, regarding the purchase,modifications needed and finally the installation of a front disc brake setup for a Yamaha RX-based motorcycle.
Thanks to Seana Auto Spares for providing me with this disc brake setup.
Thanks to Mr.Rajesh (Virugambakkam,Chennai) for installing this on my RXG.
Thanks to my mentors and many of my dear friends for helping me with the informations and further parts that were required to do this succesfully.
I hope this tutorial helps you out in getting far better braking from your RX100/RXG/RX135 or RXZ.
If you want to make the same front numberplate setup like my RX, Follow this tutorial :
• Tutorial : Install Fro...
Thank you for watching!
Do like the video if it helps you.
Do comment your video suggestions & video requests, I shall try to put in my best efforts to get it done for you guys.
Do consider subscribing if you like my content.
Keep the Blue Smoke Alive!
My Bike : 1997 Yamaha RXG
My Camera : AKASO V50 PRO (w/o external microphone)
My Helmet : STUDDS Yamaha
► Artist Attribution
•Music By: "KaizanBlu"
•Track Name: "Time"
•Instagram - / kaizanblu
•Spotify - spoti.fi/37i7yEN
•UA-cam - bit.ly/2ToXnL8
•SoundCloud - / kaizanblu
•Facebook - / kaizanblumusic
• DOWNLOAD @ www.chilloutmedia.com/kaizanblu
•Licence: Creative Commons CC BY-SA 4.0
- Full licence here: creativecommons.org/licenses/...
• Music released by: Chill Out Records @ goo.gl/fh3rEJ & www.LoFi-HipHop.com - Авто та транспорт
11:53 I can't thank you enough for showing the part number, Bro!. I had been looking for this part all over my town and nobody had a clue. Then I watched your video again and stumbled upon the part number. Went to the Bajaj showroom immediately and got 2 of them ❤😊
As a physicist I admire your choice of words and seeing your video is an absolute bliss :-)
Thank you :)
its really helpful..i was looking for disc setup for a long time...thanks man
Cheers man! Glad that the video is helpful. Feel free to ask any queries regarding it :D
I was literally searching for the Speedo meter worm for the same.thanks for making this video ..much appreciated 👍🏼❤️🔥
Cheers! Yeah, the speedo worm has become rare to get. I’d suggest you to stock another one for the future.
Will do tnx bro
Absolutely brilliant video!!! Very detailed and clear :) and best part is that you have spoken English so that the rest of us can understand what's going on :p You are awesome sir!!
Thank you!
Yes, My channel was,is and always will be in english so that a wide range of audience can understand the content easily.
Do subscribe for more :D
@@BrattyBiker obviously subscribed ;) gonna be forwarding your video to all my RX buddies who wanna install a front disc brake too!
That’s awesome!
Thanks a lot!
Wonderful videography and nice explanation. Thanks.
Thanks :) I hope it helped!
Great explained ever ❤️ I can announce you a true RX 100 LOVER ✌️ EVER ❤️
Thanks!
U said it👏👏👏 happy to see this❤️
😊😊
Tq bro with the Help of your video speedo meter is working again ❤️
Cheers!
Very good explanation.Good teacher.
Thanks, hope it helps :)
I do got an gladi set up for my Rx 135.. performance amazing bro... really it's needed for an Rx...nice vedio brother informative
Yes, Gladi setup is amazing. A bit on the expensive side but a direct fit.
@@BrattyBiker yeh ah bit expensive..but now I guess the price hasbeen dropped..bcz people are upgrading ..
Yes, I still see Gladi sets starting from 6K
A video from bratty biker after long days. Awaiting for your video man.
😊👍
Super bro, a perfect updrade. Change the front left indicator cover, as the colour has gone it looks odd. Have you changed the switch console
Yes, have to change the lens of the left indicator.
No, the switchgear console is the same.
Even ppl shd b lucky to own this beast rx🔥 proud owner making sm sound in road 😂
Haha what I own, is a more sedate version of the RX. The 135 5 speed without it's stupid heavy catcon, a normal chrome exhaust from the 4 speed/100 would be a beast!
8:16 @BrattyBiker i have same old classic pulsar setup but when I try to fit pipe on Tee(T) its have little differences on it
What should I do use same method with screw drive to open some area 8:16
Subscribed best video
Thank you
Nice video macha.
Side mirror entha vandiyodeth neenga use pannath???
Thanks, I am using Shogun’s mirrors. But not original ones, they are made by Autobird.
Super explanation bro
I've one doubt
Shall we use first gen pulsar fork set(only fork) with new Gen pulsar alloy wheel setup (alloywheel, brake caliber and disc)
Unfortunately no. You cannot use alloys with the first gen forks.
@@BrattyBiker thank you
Hi ihv 135 4S.....the upper plate is not like yours one....bolt fit from upper side...still do you suggest pulsar 150 classic absorb er will fit
Yes, Pulsar classic’s disc set is (almost) a direct fit for the entirity of RX series right from the first ever RX100 to the last ever RX135. But if you mean that your upper T plate is not of the stock RX, just make sure to get an RX upper T or Pulsar’s Upper T along with the set when you purchase it.
But if you mean that the Fork’s bolt at the top is different, no worries, First gen Pulsar’s tubes m had a nut that bolts on the top of the fork tubes, some doesn’t come with that and the one I particularly am using, is in the latter, doesn’t have the fork tube’s bolt on the top.
Bor help me I have attached front fork and swingarm of R15 in suzuki samurai now problem is the wheels I want to install front wheel spoke rim with disc. Suggest me which wheel hub I have to use?
I’m sorry, I have no idea about this.
Bro, i hv got pulsar 150 dtsi disk and fork set. Also i make 4 holes on T fork bigger and it fits properly. But the problem with axil side... total width is smaller .. it possible to fix the same? Do you have any references?
Axle is not wide enough. So get the 150 DTSI’s axle You might need some mods on the lathe to set it properly.
Sir i install same .but bike pulling right side . how much we grind the bush pls help me
Check your coneset, check for any bend in your forks. Also grinding the bush is a trail & error method, you have to do it till the disc is not touching the pads too much, unnecassarily.
rear subframe & rear swingarm.
Congrats on the new brake setup! How much was the labour charge for this?
Thanks. Labour charges were ₹700. I will make another video detailing the cost and also answering a lot of questions which I expect here on the comment section :)
Bro.. how's the gold brand spokes now. I bought it yesterday for my samurai disc setup.
It's OK, but as expected, it has faded and lost its shine. I'd highly suggest you to get it zinc or nickel plated before installation.
Hi bro. Any idea on old model pulsar 150 classic 2001-03 fork oil quantity and will adding a lower oil quantity enhance suspension travel while fitting the same in RX? Because rx weighs arnd 30-35 kgs lighter than the old pulsar.
No, it won't change the suspension travel. Suspension travel is decided by the springs, length of inner tube and a factory-set damp-rebound. Fork oil won't change the way works.
I'm not sure of the quantity. Please refer to a mechanic for that.
@@BrattyBiker 👍
Can we instead install the entire fork setup with wheels... Since the wheel size is same 2.75-18
Yep, if your rim is in good shape, go for it!
Why not use complete front wheel of Pulsar 150? (rim, spokes, hub and also speed gear)
Yes, I had recieved the complete kit, but the parts like rim, spokes.etc were rusted so badly I decided to go for new one, even the speedoworm was dead so I had to replace with new. Otherwise all other parts are from the same set.
Bro i bought dtsi model disc set.. it wasn't fitting directly.. what to do
You have to mod the bottom & top-T for the fork tubes to go in properly. Bit of a hassle but a one time job.
I Highly appreciate your video..good guidance for new Rx'ian guys..
A small doubt does this disc set up increases the bike height from front portion..or it's the same as we are using pulsar forks in it....
Thanks ji,
Nope, that’s the good thing about first-gen Pulsar setups, the height is exactly the same as stock setup of RX, so no need to worry about it.
@@BrattyBiker
Thanks allot sir✌👍
Love from Hyderabad.....
Keep rocking with your fantastic vlogs...
@@nawazhussain5090 Thank you :)
@@BrattyBiker sir a small clarification,could you pls say how much (in mm) the axle distance Bush need to be slashed...
I’m not exactly sure as the mechanic got it done before I could have filmed it. I believe it’s a trial & error method, they continue chopping it off until where the disc is not excessively rubbing against the pads when the brakes aren’t used.
Sir which brake levers you used for this bike which company
I previously used Apache RTR levers. Now using Pulsar levers. Both are superb.
Hows the chrome quality on ur aftermarket 4S mudguard and how much it costs? Can u assist me with the location where u got this installed. Got a complete classic pulsar 150 so I hope it shouldn't be an issue in fixing the disc set up on my 135 5speed.
It's not that great. The shine is there but it can start rusting pretty quickly for the lightest of rains so I keep cleaning the thing regularly. Try finding original 4S champion mudguard instead of these aftermarket makes.
I reside near Virugambakkam (Chennai) so I got it done here at the Market, there is a small garage.
@@BrattyBikerfine. Thank u so much. Will get back to u in case of need.
Cheers dude!
Bro.. Can we lube drive chain with used engine oil.. Or should we use a dedicated Chain oil/grease for that?...
You can lubricate the drive chain using a 90 grade oil. You don’t need any special grease or dedicated chain oil for it.
@@BrattyBiker Thank you bro...
@@polakideepak2744 Cheers :)
Did you buy a new disc assembly from Bajaj centre or scrap shop ?
Scrapyard. These things are vefy old, you can't get them new anymore.
Where did u get chrome clutch n break lever?
If online share link
It is from Apache RTR as I have mentioned in the video. It is very easily available in almost every spare parts shop locally. For the clutch lever, get with the RTR’s Yoke, as RX yoke cannot accomodate this lever.
which bike Master cylinder used for this bike
Stock Pulsar ENDURANCE make Master Cylinder.
Bro na pulser disc setup poda poda adhuku entha bike oda Disc oil hose pota correct fitting la irukum romba lentha illama adhey mathiri seepdo cable solluga
Use stock hose & Pulsar speedo cable. It is a direct fit on RX speedo.
Pulser 220 hose podalama
Nope. Use 150's hose.
Does the meter cable of the pulsar suit the meter of the rx?
Yes sir, direct fit. You can see at the end where I ride, the speedometer is functional.
Nice info. Myself from Velachery, Chennai. Can u share the garage address and shop where u got the 4s mudguard? Is OE 4S mudguard available?
4S Mudguards, lot of aftermarket ones available. Original, you may find old stock unsold ones but its a bit rare. Check with Bajaj dealerships too, they might have unsold or uncleared inventory.
@@BrattyBiker ya will check out. But the pivot points are same with pulsar fork legs, right? Planning to get it because don't want to ruin my RX mudguard since it's pretty new as well and need it unaltered if I'm going back to stock setup.
Pivot point, I think you mean the mounting holes. Yes the mounting holes of the 4S champion matches the fork legs. Keep the RX mudguard safely, don't try to mod it like I did, mine was already ruined to begin with.
Would you mind sharing how much you spent towards labour?
Sure! Labour cost was ₹700. I expect to recieve a lot of questions in the comment section of this video so will make a seperate video answering all of them :)
Which bike rim did you use when you put the disc in
I have used a Hero 18 inch rim, have mentioned it on the video.
Which bike speed worm installed bro
2nd gen Pulsar's speedoworm (1st gen DTSi model). Had to be faced to fit.
Bhai am i too late to comment on this 1 Year video but I want to know how much you cost for all this setup, can i get detail price ???
Apologies for the delay to reply.
This full setup costed me just over 5K.
Is the avenger also the same size
Nope, Avenger disc setup is quite different. It will be great for an RD350, but not for an RX-Series.
Bro which DTSI vorm fit to it bro
Tell the spare guy, Analouge model. First generation DTSi worm.
Which Speedometer cable to fit
Pulsar's speedo cable has to be used.
bro speedometer wire entha vandiuthu?
Pulsar dhu dhaan sir, aanaa old Pulsar one for analouge meter, not digital one.
Speed worm which bike new one?
Distance little bit facing
Yeah, Speedoworm is from the first-gen DTSi Pulsar (2nd gen Pulsar). Had to be faced to match.
@@BrattyBiker thanks bro ❤️
@@ajiajith3706 Cheers :)
Wow!
😊
Bro unga speedo cable entha bike oda cable
Pulsar.
I bought a pulsar 150 dtsi disc setup wat all changes to be done to fit the wheel i already machined the handle plate hole and t plate hole and i got dtsi spacer and speedo worm from 150 dtsi please suggest wat to do
I think you've done everything that's needed to be done. You can install the disc now. Just keep an eye on the wheel axle though.
@@BrattyBiker the space in downside its very narrow to fit the speedo worm and distancer will alling the t plate once then fit the disc
@@BrattyBiker if you have instagram profile let me know
Yes, try fitting it this way. Make sure to get the help of someone experienced in doing this.
@@BrattyBiker there are no space to fit the speedo worm and distancer what to do can you suggest ?
Which bikes speedo worm did you use discover
Nope, have used Pulsar 150 DTSi spoke model's (second gen Pulsar) speedo worm. You will need to shave 8mm off it if you want to use it on first gen Classic Pulsar's front disc setup.
@@BrattyBiker ok tq❤️
First generation pulsar means round classic pulsar model.
Yes sir, the one with the round headlamp.
Bro one help neenga Corner Bush entha shop la purchase panninga pls antha shop address solunga
It’s just near KK Nagar Driving Ground.
What tyres are you using front and back ?
MRF Rib 2.75 x 18 front
MRF Zapper C 3.00 x 18 back
So have you bought the old pulsar setup ??
Yes sir. You can see it clearly on the video 😊
I got the OEM fuel tap sir
Awesome! Make sure to clean the tank, check for any rust, if found, follow my tank derusting tutorial, remove the rust, clean the tank and then install the new fuel tap.
Regardless, use a normal small fuel filter. Helps keep the carb clean and function properly.
Bro, Does the stiffness you feel on bumps is because of the Pulsar forks or something else? A guy on a whatsApp group who uses Gladiator disc brake setup mentioned that he could feel smooth spring-like action while braking/riding. Do you think we could use the rx's fork/gladiator fork with the pulsar disc brake setup to reduce the stiffness?
The stiffness is caused by Pulsar’s forks. It was originally designed for Pulsar’s weight,dynamics.etc and not for RX. RX is a much lighter bike (Pulsar is 130KG, RX is 100KG) which contributes to the front-end being a bit stiff.
For Gladiator, The bike’s weight was 115kg with a softer front-end, so it is noticeably softer than that of the Pulsar’s setup.
Difference here is, Gladiator was a commuter so engineers provided a soft suspension to soak up the bumps on road, while Pulsar was considered a sporty bike, so engineers from Bajaj has provided a stiffer front-end for better handling and high-speed stability.
For Gladiator’s setup, you can use the inner tubes of RX, unlike Pulsar. This is also why/how you can retain the softness in the front-end, if you go for a Gladiator setup.
Unfortunately it is not possible to use RX’s inner tubes on the Pulsar setup.
@@BrattyBiker Oh OK. Thanks for the insights, Bro. What about rx/gladiator fork legs? Can't they be used with Pulsar disc setup?
No, unfortunately you cannot use Gladiator/RX’s inner-tubes for Pulsar’s fork legs.
@@BrattyBiker Bro, what about the inner springs and other internal parts from the stock bike or gladiator's? Will that make any difference?
@@mjshaheed Yes, will definitely make a difference. As you can use RX Springs and inner tubes on Gladiator's Forklegs, the soft nature can be maintained. This is not possible on Pulsar setup.
Why do we need to change spokes?????
This is because the disc’s hub is smaller in diameter compared to the stock drum of the RX. So the stock spokes won’t reach till the Disc setup’s hub (regardless of whatever setup, Pulsar/RTR/Gladiator.etc). This is why you need to change the spokes accordingly. You can reuse the rim,tube & tyre though (if they are in good shape, I’d suggest replacing them if they’re rusted)
What's the disadvantage of installing disc brake?
1) Stiff front suspension
2) Cost (&risk) of parts and finding a good lathe & experienced labour
3) Very powerful brake, so chances of front wheel lock & skid is high
4) Slightly more maintenance cost for disc brakes.
But the advantages easily outweigh the disadvantages, so you can go for it.
I will make a separate video answering this question in detail :)
@@BrattyBiker ❤️🤗
What was the total cost for front disk brake setup??
Everything costed me just over ₹5000.
Bro how can we find a front disc setup ?
You can search at your local scrapyards for them (Like in Madras, you have Pudupet, in Banglore, you have Shivaji Nagar.etc). They frequently get old bikes for scrapping so they have these parts readily available with them. Ask them for whatever set you want, If you take Pulsar first gen, it won’t cost you over 2-3K at max and you can follow my video guide for installation. Gladiator setup is easier as you can use the RX’s inner tube itself, only fork legs you have to change so, it’s comparitively easier to install but more expensive & parts are difficult to find. RTR setup is most difficult to install as it requires a lot of mods to do so.
Hope it helps :)
Spokes-Which brand bro? Original Bajaj spokes for this model not available here too?
Bajaj OE Spokes are not available anymore. I have used the spokes made by a brand called 'Gold'
Quality is not that great, the shine has worn off and some of them have started to show some signs of rust. I would suggest you to get them nickel or zinc plated before using or altogether suggest using Gabriel or stainless steel spokes which are rare but far far better in quality and durability
@@BrattyBiker 👍...thanks...will try to get Gabriel spokes. Any idea on Gabriel spokes availability in Chennai. Possibly GP road? Or any other place in and around Chennai?
@@BrattyBiker also tried for 4S OE mudguard but no supply. Checked from the Bajaj distributor itself.
@@KK-cd7nu No idea unfortunately. I am searching as well. Will update if I find any.
@@KK-cd7nu Yes, you can use a Boxer mudguard. Might still be in production.
How much mm should we reduce the wheel spacer?
Depends on setup, induvidually.
@@BrattyBiker wat do u mean? Can u explain?and how much did u reduce?
@@shadowfreak5551 Mine was reduced by a bit, unfortunately couldn't get exact measurements as it was done before I could reach the lathe.
Does Rtr breaker lever suits Suzuki max100 ?
For the drum brake, No, it won't suit.
If you have a disc brake setup of Pulsar/Fiero, then you can use RTR Brake lever.
@@BrattyBiker for disc setup I asked ok bro 🥰
Oh OK then yes, go for RTR levers!
what was the total cost .. for changing from drum to disk.. is it possible on splendor. which gives me 60 after 17 years of service. will be waiting for the used spares specs, so that i can purchase it slowly.
The total cost was just a bit over ₹5,000. Yes, it is possible but since I did it on an RX, which is a different bike, I am not sure of how easy or difficult it is, to install a disc on the Splendor.
Which bike speedo cable did you use bro
Pulsar 150's speedo cable bro.
@@BrattyBiker tq for your quick reply❤️
Cheers :)
Mitra cable model bro
Speedo cable ? Stock RX only.
milleage drop akuma bro?
For Nulon ? For the initial full tank fuel mixed with Nulon where coating process is going on, yes, you can expect mileage to drop a bit.
But once its done, don’t worry about it.
Do we need to change rim and tyre?
As said in the video, Not necessary.You can use your existing rim and tyre if they are in good shape.
Otherwise you can change them. I’d suggest going for Hero/TVS/Mandap rims and Michelin Street Sirac 2.75 x 18 front tyre.
Why is the rear shocker not change??? What are the option?
@@jacksonpeter4124 I originally changed mine with the same model. But I am not impressed with it, I might change it later.
Options,you can go with : TVS Gabriel Series Spring (stiff & tall, good for Yezdi wheel) or of Bajaj CT100's (same height as RX & soft and comfortable)
Total cost for this setup. Please tell sir
Costed me just over ₹5,000 including the kit itself, lathe & final labour charges.
Speedo worm is which bike's?
Speedo worm is from a DTSi Pulsar 180. Due to it’s additional 8mm of thickness, it had to be machined/faced to sit properly between the wheel hub and left fork leg, without any clearance issues.
@@BrattyBiker 💖🤗
Bro what's the price of new hub set ?
Then spokes?
Caliper , cylinder?
New hub, is not available, you will need to get a used one from a scrapped bike, won’t cost you more than ₹500 but its hard to get the hub alone as you will most likely only get the full disc setup for 2-3K.
Spokes will cost you ₹250 but I heard the price has changed, not sure.
Caliper with pads will cost you ₹1,200
Master Cylinder with lever will cost you ₹1,000.
Is that lever is Rtr 160's ?
Bro Does all pulsar model bike's caliper suits?
@@EEE__-io2vj Yes, both the levers and the left side yoke is from the RTR 160/180
No, only Pulsar 150’s caliper will suit the disc.
Bro is that pulsar 180 Analogue meter type speeda worm?
Yes ji. Please watch the video fully as I have explained everything in detail.
@@BrattyBiker good explanation 🤗 bro. Speeda worm is not available here that's my issue 🤦🏻bro . I am from tuty I asked here and so in Tirunelveli and madurai
Yeah, it has become rare. I’ll search here & ping you if I find one.
@@BrattyBiker ok bro . Please ask any say bro❣️
@@BrattyBiker bro are you in Instagram . In will text you there
Bro brake lever's are of which company?
They are the ones from the TVS Apache RTR series.
@@BrattyBiker Thanks bro
@@Jimmy-mv7yh Cheers :)
Bro what's the size of spokes?
Exact size is unknown. But just ask your spare shop for a Old type Pulsar spokes and they will provide you a set, usually from a brand named 'Gold'.
@@BrattyBiker ok bro 💖
Cheers :)
Bro spedo cable is from which bike? Pulsar 150's?
Nope, it’s of RX only. The cable will work with Pulsar’s Speedo Worm, no mods needed there.
@@BrattyBiker bro what is the size of spokes?
In length ? Obviously it’s longer. Exact number in mm or cm I don’t know but you can get old model Pulsar spokes, just that it’s a bit rare to find.
@@BrattyBiker bro I asked for 18 inch rim you have installed 🤷🏻♂️ . Bro but pulsar's rim is 16inch know 😊 that's what I asked
@@EEE__-io2vj Pulsar's rim is 18 inch bro, same as RX. So the spokes are a direct fit.
Finally work finish how bro..?
Work will be finished by filling and pumping the brake fluid.
@@BrattyBiker price?
About ₹5,000 including the labour and lathe charges.
@@BrattyBiker Thanks bro
Cheers :)
bro this type of modifiction speed affect
Nope, it is to reduce your speed better and quicker than the stock drum brake setup, when used. Otherwise doesn’t affect riding speed.
@@BrattyBiker bro top speed this type fork will affet or stock better
No, this doesn’t affect your topspeed or acceleration. This is definitely better than the stock drum setup.
@@BrattyBiker ok tq😊😊😊😊😊
Cheers :)
How much that Shogun mirror costed?
Had to pay ₹650 for it since it was a new old stock one and was sold by a reseller looking to make a nice profit for himself.
Can you use old yamaha mirror in these Yokes??
Yes, you can use Yamaha mirrors.
Thnx..bro👍 your video clear lots of my doubts 👍👍👍
Glad to know that the video is helpful...cheers :)
Bro that hero rim size 18 inch?😊
Yes ji, 18 inch.
@@BrattyBiker which bike's?
Nothing in Specific. Just it’s made by Hero MotoCorp.
@@BrattyBiker ok bro ❤️
Cheers! Hero rims are well priced & high quality.
1_good useful video bro.
2_bro you can apload more videos. I will support.
3_bro Yamaha RX100 1992 model original OE brand new G2 cylinder kit and 1985 to 1987 model Japanese RX100 original brand new carburetor, 6hole silencer, 6hole silencer mufler any available please tell me bro. Very urgent. (Konjam help pannunga bro please)
Thanks, will upload more videos with time.
I have no idea regarding the availablity. Brand new OE G2 bores will cost 10K+ and new carb another ₹5K and 6-Hole exhaust costs 4K plus you have to get it repaired and replated which can cost another 2K. You can check Facebook marketplace
@@BrattyBiker
1_Thanks bro. But how can I'm buy it OE G2 cylinder kit.
2_Bro you say check Facebook market but I don't know face market(yaenaku RX Facebook market pathi theriyadhu bro)
3_please bro help me(konjam help pannunga bro) any RX Facebook market links send me bro.
Check your local scrapyards for RX100 bores. Facebook Marketplace, simply type in the parts you want, you may find a seller. Contact him or meet and buy directly.
those forks are sprung for a much heavier bike
Yes true, have mentioned it on the video at the end, hence why it is stiff for the RX.
Best set up is from gladiator.
Bro are those pulsar 150 forks? And how much it cost in total for changing to disc brake?
Yes, the front suspension is from a first generation Pulsar 150 (Non-DTSi one)
Totally costed about ₹5,000 including parts,labour and lathe charge.
@@BrattyBiker Okay. Can you tell if those parts would be available online? I have a RX-135 and want to install a disc brake as well.
These are very old parts, not available online. But some induvidual sellers sell them online. Again, since these are old parts, it’s better to get them after physically and visually inspecting their condition in person as you’ll get a much better idea than looking at photos.
@@BrattyBiker okay bro, will look offline. Thanks a lot👍👍
Cheers!
Today I will replace my Yamaha Rx 100 fuel tap
Sure, make sure to get Yamaha OE and not aftermarket like A.R
Sir I don't know where to get the OEM parts and In kerela
Search for a Yamaha showroom and contact them, ask them to tell you which Yamaha spare shop sells OE parts for RX and get from there.
distance caller length needed which you have faced vernier caliper measurement needed...
please brother....help me i do not get your insta...insta id also...
or the old distance caller is direct fit or not...
please let me know...
I haven't measured it with the vernier unfortunately.
My Insta ID is @brattybiker
If you still have the old collar, it should most likely be a direct fit.
Bro neenga tamilara
Yes
Bro Tamil la review panunga bro
Sorry ji, channel is primarily english so that I can cover a vast majority of audience in the country. But I will try on Tamizh too :)
Hello, can you please read your mail.
Sure!
Hey brother if you don’t mind can you share your Instagram id i have some serious doubts which can’t be explained through words 😅
Sure, it's @brattybiker